Lightolier 4SXT User manual

4SXT
Decorative, Pendalux Suspension, 48", 96" Ext. Stem
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
2
7
6
3
4
5
1
Extension kit for use with Lightolier catalog numbers 4 (A-Z) suspension series.
Ordering Information
Catalog No. Finish Length Catalog No. Finish Length
4SXT48PB Polished Brass 48" 4SXT96PB Polished Brass 96"
4SXT48SB Satin Brass 48" 4SXT96SB Satin Brass 96"
4SXT48SN Satin Nickel 48" 4SXT96SN Satin Nickel 96"
4SXT48WH White 48" 4SXT96WH White 96"

4SXT
Decorative, Pendalux Suspension, 48", 96" Ext. Stem
Page 2 of 2
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
4SXT May 24, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011.All rights reserved.
Job Information Type:
2
7
6
3
4
5
1
Features
1. Extension Stem: ⅝" diameter steel tubing 48" long
(two provided with 4SXT96 Series extension kits.)
See page 1 for finishes.
2. Coupling: Threaded coupling provided with 4SXT96 series
extension kits to attach two 48" stems together.
3. Wiring Harness: Male connector with three 18AWG
conductors (120" long).
4. Hex Nut: Two provided for attachment to suspension plate.
5. Lock Washer: Two provided for attachment to suspension
plate.
6. Drill Locator: To assist in reinstalling ⅛" diameter hole in
stem when stem has been field cut.
7. Allen Wrench: 5⁄64" Allen wrench provided to install swivel
ball (provided with standard suspension systems) to a field cut
stem.
Note: For all 4SB1XXX single stem kits, extension stem replaces
original stem. For all other kits, extension stem replaces short
section above collection point.