Specifications
■
1 Housing: Extruded aluminum with die-formed aluminum
end caps. No exposed fastener.
■
2 Lamping: Two T8 fluorescent lamps, as specified.
Provided by others.
■
3 Louver: Matte silver anodized, parabolic with perforated
reveal along top.
Electrical
Specify 120 volt or 277 volt. 3 conductor, 12 gauge
wire. Color-coded quick connectors allow ease of
connection for joiner modules. For special circuiting,
consult factory. Rapid start, HPF, class “P” ther-
mally protected. PowerSpec®HDF dimming ballast
is available.
Mountings
Cable Suspension (not shown) – 4 1/2" diameter flat
canopy finished satin aluminum, 1/16" diameter
stainless steel aircraft cable adjustable up to 36",
Adjustable cable gripper with cable adjustment.
Stem Mounting (not shown) – 4 1/2" diameter flat
canopy finished chrome. 1/2" diameter stem.
Chrome plate or white finish. Can be cut to length
on job. Self-aligning swivel provides adjustability up
to 38 degrees. The stem assembly shall meet or
exceed the requirements set forth in the State of
California Uniform Building Code for suspended
lighting fixtures installed in seismic zone four.
Surface (not shown) – mounts with standard screws
or fasteners.
Finish
Satin aluminum anodized. Custom colors available,
consult factory.
Options & Accessories
Dual switching, emergency battery packs, fusing available –
consult factory.
Labels
UL, ULc and IBEW.
Mountings
Single Stem – Chrome
S24 = 24" Stem
Cable Assembly – aircraft cable adjustable up to 36"
Single Cable: C36
Single Cable and Cord: CC36
Single Cable and Coiled Cord: CCC36
End Cap Set
CCM2047E
71/2"
6"
2
1
3
Specifications
LS6
CCM2047
The CCM is a stylish
and contemporary
fixture specifically
designed to add
distinction to spaces.
Profiles
Architectural
Round
Square
Recessed
Cove
Accent
Custom
Lightolier Lighting Systems
Lightolier Lighting Systems are modular lighting systems that offer a wide selection of
geometric shapes, architectural profiles, scales and finishes.
High tech interiors require luminaires that have the ability to add
visual distinction to their highly modern and functional appearance.
The CCM utilizes two T8 fluorescent lamps to provide powerful yet
controlled downlighting. A parabolic louver featuring a matte silver
anodized finish controls glare and provides an even distribution of
light. Perforations in the louver add definition to the fixture while
the fluted top offers a clean, controlled look.
The CCM is designed to be mounted individually or in continuous
rows. Color-coded quick connectors allow ease of connection
when mounted in series. Designed to provide value, performance
and easy installation, the CCM meets all the needs of high tech
interiors while providing quality illumination.
Lighting Systems
400
800
1200
1600
090˚
45˚
0˚15˚
6"
7 1/2"
CCM: 2 Lamp T8 Direct
Report No. 2480
CCM-1: 2 lamp T8
61.7% efficiency, 5.9% ∧94.1% ∨
Coefficients of Utilization
% Wall Reflectance
50 30 10
073 73 73
166 64 62
260 57 54
354 50 47
449 45 41
544 40 36
640 35 32
736 32 28
833 28 25
929 25 21
10 26 22 19
80% Ceiling Reflectance
20% Floor Reflectance
Room Cavity Ratio
Application Data
Fixture Spacing Footcandles Watt/Sq Ft
50’x 70’x 8.5’Space
8’x 8’(64 sq ft /fixture) 50 1.0
8’x 10’(80 sq ft /fixture) 40 0.8
12’x 16’x 8.5’Space
6’x 8’(48 sq ft /fixture) 46 1.3
8’x 8’x 8.5’Space
8’x 8’(64 sq ft /fixture) 26 1.0
Reflectances: 80% Ceiling, 50% Wall, 20% Floor
Light Loss Factor = .75 (.88 BF x 8.5)
Style Length Ballast & Voltage
48 = 4 foot E81 = T8 Electronic 120v
96 = 8 foot E82 = T8 Electronic 277v
HD1 = T8 PowerSpec HDF Dimming 120v
HD2 = T8 PowerSpec HDF Dimming 277v
M71 = T8 Electronic Dimming Ballast 120v
M72 = T8 Electronic Dimming Ballast 277v
How to order
CCM2047
How to Specify
Style Type
CCM 2047
Individual Fixtures
1. Order number of FIXTURES.
2. Order one END SET.
3. Order two STEM or CABLE
ASSEMBLIES.
Continuous Rows
1. Determine run length.
2. Order appropriate number of JOINER
FIXTURES to complete the run.
3. Order one END SET per run.
4. Order one CABLE or STEM ASSEMBLY
per JOINER FIXTURE plus one.
5. For runs that exceed amperage
limits, order the appropriate number
of CABLE/CORD FEEDS.
How to Order
Example: CCM204748E81
