Lightolier Lytespan 8170WH User manual

Lytespan®Track Lighting System 8170WH
Page 1 of 2 MR16 Ring Magnetic
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lighto ier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and nish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Transformer Housing: Die-cast aluminum. Fitter twists onto track and
locks on.
2. Lamp Ho der: Die-form aluminum, .032”.
3. Bracket: .060” steel.
4. Trunion Mounting: Tensioned, provides 90° vertical adjustment.
5. Pivot Mounting: Tensioned; 90° horizontal adjustment each side.
6. Movab e Brass Contact: Extends for connection to 2nd circuit in Advent
Lytespan Track.
7. Po arity Key
8. Push Tab: Molded polycarbonate. Detaches unit.
9. Lamp Guard: Tempered glass.
E ectrica /Dimming
Low voltage magnetic transformer designed to t a compact die-cast housing
scaled to complement the track. Two-pin base socket, pre-wired with sleeved
No. 18 braided SF-1 leads. For dimming control, use only dimmers specially
rated for inductive loads (low voltage xtures equipped with magnetic
transformers) such as Lightolier Lytemode and Scenist systems and Lightolier
dimmers carrying the suf x VA.
Options & Accessory
2” Series Color Filters, Spread Lens, Beam Elongator, Louver
(See Lightolier Speci cation Sheet 7472).
Finish
All painted nishes baked enamel.
Labe s
UL; I.B.E.W.
Cata og No. Finishes Mounting Lamps
8170WH Matte White All Lytespan Track Systems 20W-75W
8170BK Matte Black MR-16 12V
Ordering Information
8170WH
8170BK

Lytespan®Track Lighting System 8170WH
Page 2 of 2 MR16 Ring Magnetic
Lighto ier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and nish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Job Information Type:
Lighting Data
(FC) is the initial footcandles at the center of the beam
(L) and (W) are to the point that the candlepower drops to 50% of maximum,
† Exceeds useable limits.