Lightolier Lytecaster 2000AIC User manual

Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2012 Philips Group • L0112
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster®Recessed Downlighting 2000AIC
Page 1 of 1 3 3/4” Aperture Incandescent Insulated Ceiling AirSeal®Frame-In Kit
Reflector Trim
Frame-in Kit
7 1/2”
5 1/2”
9 5/8”
Features
1. Housing: .032” aluminum. UL Listed for direct contact with thermal
insulation. AirSeal®Housing minimizes air leakage to less than 2 CFM at
1.57 PSF, which complies with Model Energy Code (Section 602.3.3) and the
Washington State Energy Code (Section 502.4) and reduces heat loss and
condensation on ceiling. Access door for inspection of junction box.
2. Mounting Frame: .036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1” thick. Push-in/twist-out rotoclips hold reflector flush to
ceiling.
3. Junction Box: 4” X 3 1/2” X 2”; .063” (#14 ga.) galvanized steel. UL listed
for maximum of 4 No. 12 ga. 90° C through branch circuit conductors. Access
door inside of housing allows easy inspection of wiring without removal of
housing. Integral cable clamps permit attachment of nonmetallic Romex®or
armored cable without need of additional connectors.
4. Mounting Bars: .059” (#16 ga.) galvanized steel. 13” long bars extend
to 27” with integral nailing tabs. Attaches to wood joist without need of
accessories.
5. Socket Housing: .036” (#20 ga.) galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector: Meets NEC and UL requirements. Located inside
housing
Options and Accessories
Mounting Bars: 1964 - 20” set of (2)
T-Bar Ceiling Clips: 1956 - set of (4)
Plaster Ceiling Ring: 1959 - 7/8”depth for wet plaster ceilings
277V Remote Step 7997 - 277V down to 120V
Down Transformer: 300W max. load.
Extra Thick Ceiling 1967C
Mounting Ring:
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Aperture Cone Baffles Satin Cone
2000AIC 2012 2005 2008 2027 2022 2090 2084WH
2012NM 2005BNM 2008NM 2027BNM 2022WH 2084CD
2013 2005WH 2010 2027NM
2013NM 2005NM 2010NM 2027WH
2013BK 2029WH
2013BKNM 2029BK
2013CD 2029BKNM
2013CDNM 2029CD
2013WH 2029CDNM
2013WD 2029CLNM
2013WDP 2029GD
2029GDNM
2029CL
Recessed Enclosed Open Wet
Adjustable Eyeball Diffuser Location
Labels
UL (Suitable for Damp Locations) I.B.E.W.
Complies with Air Leakage Requirements as stated in the Model Energy Code
and the Washington State Energy Code.
AirSeal®is a registered trademark of Lightolier.
Romex®is a registered trademark of General Cable Industries Inc.