Lightolier PTS6-1 User manual

Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS6-1
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
$
Quarter Scale
Features
1. Housing: Die-formed 20 gauge pre-painted steel. Integral heavy gauge bulk-
heads support housing and trim, permitting modules to be bolted together in
continuous runs and facilitate suspension.
2. Lamping: Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete ROW.
3. Stagger rows must be completed with an adjustable module.
4. Non-stagger rows must be completed with an adjustable module unless row
lengths are in precise 1 foot (30.48cm) intervals.
5. Order one END SET per ROW.
Labels
UL, cUL and IBEW
Ordering Instructions
Individual Fixtures:
1. Order number of MODULES required.
2. Order one END SET per MODULE.
(2-light only)
3. Reflector: Precision die-formed CRS finished in a high reflective baked white
4. Louver: Lift and shift straight blade louver constructed fromdie-formed alu-
minumand painted to match housing. Louver blades are 1” (2.54cm) high on
1-1/8” (2.86cm) centers. (Optional)
powder coat.
Mounting
“J” Rail is first mounted to the wall and the modules connect to the rail for 1/4”
(0.64cm) wall adjustment. Modules are hung fromsuspension wires attached to the
fixture bulkheads and the structure above.
Electrical
Electronic Ballast: Programmed start, 3 conductor, 12 gauge wire. Color-coded
quick connectors allow easy connection for modular fixutres. Factory installed
ballast disconnect allows the ballast to be disconnected fromand reconnected to
incoming power under load without turning the entire circuit off.
Dimming: Advance Mark X, use Advance compatible two-wire control (no extra
Emergency Battery Pack: 450 Lumens @ 90 minimum.
control lead required).
Cross-sectional one linear T8 fluorescent lamp. Provided by others.
Family Lamps Shielding Voltage
PTS6 1
Length Options
Blank = No Options
A= Adjustable*
X4 = 4 thru wires
X5 = 5 thru wires
A4 = Adjustable 4 thru wires*
A5 = Adjustable 5 thru wires*
1= 1 LampO= Open
L= Lens
S= Straight
Blade Louver
1= 120V
2= 277V
3= 347V
D1 = 120V Dim.
D2 = 277V Dim.
E1 = 120V Emerg.
E2 = 277V Emerg.
Module Ordering Information
7"
(17.78cm)
9 3/8" (23.81cm)
5 1/2" (13.97cm)
13
4
2
* only available on Two-Foot, Three-Foot and Four-Foot versions. See length variations of adjustable fixtures on page 2.
2= Two-Foot
3= Three-Foot
4= Four-Foot
6= Six-Foot
8= Eight-Foot

Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems PTS6-1
1BHFPG 1FSJNFUFS5SPVHI3FDFTTFE-JHIU51FS/PNJOBM4FDUJPO
$
End Cap Set:
PTSEP
12”
(30.48cm)
1 3/4"
(4.45cm)
90° Inside Corner:
PTS69ØINCO - Open
PTS69ØINCL - Lens
PTS69ØINCS - Straight
Blade Louver
90° Outside Corner:
PTS69ØOTCO - Open
PTS69ØOTCL - Lens
PTS69ØOTCS -Straight
Blade Louver
6 1/4"
(15.88cm)
135° Inside Corner:
PTS6135INCO - Open
PTS6135INCL - Lens
PTS6135INCS - Straight
Blade Louver
2"
(5.08cm)
135° Outside Corner:
PTS6135OTCO - Open
PTS6135OTCL - Lens
PTS6135OTCS - Straight
Blade Louver
End Plate and Corner Block Accessories
Sample Run
For Fixture Using Staggered Lamps
The Four-Foot Adjustable Staggered Fixture has a range of 51”(129.54cm) - 60”(152.40cm).
The Three-Foot Adjustable Staggered Fixture has a range of 39”(99.06cm) - 48”(121.92cm).
The Two-Foot Adjustable Staggered Fixture has a range of 27”(68.58cm) - 36”(91.44cm).
For Fixture Using non-Staggered Lamps
The Four-Foot Adjustable Fixture has a range of 48.75”(123.83cm) - 60”(152.40cm).
The Three-Foot Adjustable Fixture has a range of 36.75”(93.35cm) - 48”(121.92cm).
The Two-Foot Adjustable Fixture has a range of 24.75”(62.87cm) - 36”(91.44cm).
6' (182.88cm)4' (121.92cm)Three-Foot A¹
8' (243.84cm)Three-Foot A¹
6' (182.88cm)
Three-Foot A¹ 3' (91.44cm)
Three-Foot A¹4' (121.92cm)
1 3/4"
(4.45cm)1 3/4"
(4.45cm)
¹ A = Adjustable Fixture or Adjustable Staggered Fixture
21' - 10 3/4" (667.39cm)9' - 3 1/4" (282.58cm)
7' - 10 1/2"
(240.03cm)
7' - 10 1/2"
(240.03cm)
1’ (30.48cm)
Fixture used at
3’ - 10 3/4”
(118.75cm)
Fixture used at
3’ - 3 1/4”
(99.70cm)
Fixture used at
3’ - 10 1/2”
(118.11cm)
Fixture used at
3’ - 10 1/2”
(118.11cm)
Floor cavity reflectance = 20%
Performance & Quick Calculators
980
735
490
245
-30
-20
-10
30
40
50
60
70
80
90
20
10
0
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY REFLECTANCE
80 70 50
% WALL REFLECTANCE
70 50 30 70 50 30 50 30 10
0575757565653 535353
1535048514947 474644
2484441474340 423937
3443935433835 373431
4403531393430 333027
5373127363127 302623
6342824332824 272321
7322621312521 242118
8302319292319 221616
9282117272117 211715
10 26 20 16 25 19 16 19 16 13
0
0
0
0
0
0
0
0
0
0
31 28 0
76 49 0
197 153 43 41 18
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
280 228 84 77 64
702 284 133 126 118
900 498 209 184 179
977 585 312 253 247
822 591 404 329 324
689 621 480 409 395
607 589 536 501 484
541 541 541 541 541
ZONAL LUMEN SUMMARY
ZONE LUMENS % BARELAMP % LUMINAIRE
0-90 1420 48.1 100.0
90-180 0.0 0.0 0.0
0-180 1420 48.1 100.0
Report No: ITL53555
Cat No: PTS61S14
Lamps: 1 F32T8
Lumens: 2950
Efficiency: 48.1%
ROOM CAVITY RATIO
0
0
0
0
0
0
0
0
0
0
0
9
0
0
0
0
0
0
0
0
0
0
0
9
CANDLEPOWER
DEG.
180
175
165
155
145
135
125
115
105
95
90
85
75
65
55
45
35
25
15
5
0
ZONE 0 45 18013590