Lightspeed LSP-400 User manual

LSP-400 Assembly Instructions
LightSpeed Lift
500 E. 10th St Duluth, N
[phone] [e-mail]
“

Disclaimer:

 !"#$%#
&
'()'!*+,- +./ +01
#
1%#, 23

3

$4

LSP-400 Anatomy: (% [ Two Boxes Packaging]
Needed equipment: Two 15/16 inch wrenches not included)
Best if assembled with two people.
Part# Part Name Qtys
1 Uprights (with Plastic Plugs, Silkscreen Numbers) [Box 1 4
2 Attachment Bars (with Plastic Plugs, Labels)[Box 2 2
3 Gusset Plates [Box 1 8
4 Floor Support Bars [Box 1 2
5 Base Plate [Box 2 1
Below Parts are packed in Box 2
Hardware
Pack Box
3" Hex Bolt+Steel Washer+Lock Nut[Step1 4
2 3/4" Hex Bolt + Lock Nut [Step2 16
2" Eye Bolt+Steel Washer+Lock Nut [Step 3 4
1 Polybag Foam, Foam Cover, Zip Ties 2
1 Polybag Super Lift Belt (With S, M, L Leg Wraps) 1
1 Polybag Universal Lift Belt (With S, M, L Leg Wraps) 1
1 Polybag Lift Straps 1
1 Polybag
Ruler with Adhesive Velcro 1
Assembly Instruction Manual 1
Training Guide Booklet 1

Step 1
Take out Part #4, #5 from Box.
Take out Bolt Pack Labeled “Step 1” from Hardware Pack Box.
156,7898:8;:%8)
#
Note: Do Not Fully Tighten at this step!
LightSpeed Lift LSP-400 Assembly Instructions:
Note: It is easiest to assemble the unit away from your treadmill and move it into position after assembly. However, you
may install around your treadmill if that is the better option.
Inspect packaging to damaged or missing goods. Contact Light peed immediately with any concerns.

Step 2
Take out Part #1, #3 from Box.
Take out Bolt Pack Labeled “Step 2” from Hardware Pack Box.
150.58,&67898:%8)#

Notes:
<Gusset Plates #three holes<

=>slots facing the rear of the
treadmill
Do Not Fully Tighten at this step!

Figure A
Figure C
Step 4
Move the LSP-400 frame into position, move the treadmill in place, and begin your movement program!
Figure B Figure
Step 3
Take out Part #2 from Box.
Take out Bolt Pack Labeled “Step 3” from Hardware Pack Box.
151?(!5@#A1
5
B1+#
#A
$(#A$
C<%3+#1
D1
Note:
Ensure the frame is square. You may now tighten all bolts.
Ensure the attachment bars move fluidly between height
options. If the changes are not fluid, loosen the 4 base plate
bolts with the attachment bars at a lower height and retighten.
Inspect bolts twice a year for tightness as basic maintenance.

LightSpeed Anatomy: Lift Systems
Universal Lift Belt
)
$
$
;
=;
#;
C#
'
'0/'56', 
7

$
$
C# C#
$
LightSpeed Anatomy: Lift Systems
Lift Strap agic Shorts
E25/2, 
2,02,,
2,62,.
2,.2,*
E2,*265
EE26,26. 8