Lightwave Link Plus L2 User manual

Link Plus (L2)

Range & Posioning
The wireless range of a single Link Plus should cover a
typical large house. To ensure the best performance, try
not to posion the Link next to radiators, water tanks
or very thick walls. Sing the Link as high up as possible
within your home (e.g. on the rst oor) will always
provide the best coverage.
Help video & further guidance
For addional guidance, and to watch a video that will
help guide you through the installaon process, please
visit the support secon on www.lightwaverf.com
Voice Control
You can use your voice with Siri on compable Apple
devices, with Google Assistant, and with Amazon Alexa
to issue commands to Lightwave, to control devices e.g.
“Turn the living room lights on”. See www.lightwaverf.
com for more informaon.
Control from anywhere
You can control Lightwave devices whilst away from
home using your app. You can also use automaons to
schedule devices to work automacally at mes that
you set in the App.
Expand your system
Lightwave is very exible, and you can add new Light-
wave devices to your system at any me. Other family
members can also download the App and use it to con-
trol devices on their own smartphone or tablet.
What do I need?
The Lightwave Link Plus requires mains power and a
standard wireless router with a permanent internet con-
necon in order to operate. You will also require a WiFi
enabled smartphone, tablet or PC.
Preparaon
Main buon
Power Socket
Indicator LED
Ethernet Port
RF frequency: Input rang: Output rang: Warranty:
EU Declaraon of Conformity
Product: Link Plus Wireless RF Controller
Model/Type: L2
Manufacturer: LightwaveRF
Address: Innovaon Campus Birmingham, Faraday
Wharf, Holt Street, Birmingham, B7 4BB
This declaraon is issued under the sole responsibility
of the LightwaveRF. The object of the declaraon
described above is in conformity with the relevant
union harmonisaon legislaon.
Direcve 2011/65/EU ROHS,
Direcve 2014/53/EU:
(The Radio Equipment Direcve)
Conformity is shown by compliance with the applicable
requirements of the following documents:
Reference and date:
EN301489-3 V1.6.1: (EMC), EN300220-2 V3.1.1
(RF), EN62479:2010 (RF Exposure), EN60950-
1:2006+A2:2013 (Safety)
Signed for and on behalf of:
Place of Issue: Birmingham
Date of Issue: 20th August 2017
Name: John Shermer
Posion: CTO
Environmentally friendly disposal
Old electrical appliances must not be disposed of
together with residual waste, but have to be disposed
of separately. The disposal at the communal collecng
point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these
collecng points or to similar collecon points. With this
lile personal eort, you contribute to recycle valuable
raw materials and the treatment of toxic substances.
UK
1
Specicaon
868 & 434MHz 5V 3W approx 2 year standard

Steady green (or personalised colour):
Status normal
Flashing green:
Transming
Flashing green / amber:
Linking mode
Steady red:
Cannot contact server
Flashing amber:
Device restarng/updang
Solid white:
Firmware installing (do not remove power)
Seng up the Link Plus
2.1 Aach the Ethernet cable
Take the Ethernet cable (supplied) and connect it to
any spare available LAN port on your wireless router.
Connect the other end of the cable to the Lightwave
Link Plus’ single port.
2
2.2 Aach the power supply
Plug in the power supply and push the Micro USB
connector into the socket on the back of the Link Plus.
The Link Plus will now enter its startup sequence and
will aempt to nd a connecon to the Lightwave
server. A solid amber light indicates that a connecon is
being aempted, and a solid green light will show once
a connecon has been established. Once the green
light appears, the Link Plus is ready to be set up on the
Lightwave Link Plus App.
3
Seng up the App
3.1 Download & open the App
Download the Lightwave Link Plus App from the
App Store. Open the App and follow the instrucons
and tutorials which will take you through the setup
procedure.
You can also use the Lightwave Web App to set up and
control your Link Plus. This is a more extensive plaorm
very suited to seng up and viewing large installs. This
can be accessed at www.lightwaverf.com.
3.2 Follow the in-app instrucons
Once your Link Plus is set up, you will be able to register
mulple smartphones or tablets to control any number
of Lightwave devices in your home.
HomeKit
You will also be able to control Lightwave devices via
HomeKit using the code below. To do this, open the
Home app on your iPhone or iPad, select the Link Plus
and manually enter the code.
Communicaon between iPhone, iPad, or iPod
touch and the HomeKit-enabled Link Plus is secured
by HomeKit technology. Controlling this HomeKit
enabled accessory automacally and away from home
requires an Apple TV with tvOS 10.3.2 or later or an
iPad with iOS 10.3.2 or later set up as a home hub.
Apple, iPhone, iPad and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
HomeKit is a trademark of Apple Inc.
LED Indicator lights
xx-xx-xx-xx
www.lightwaverf.com
Need some help?
[phone] [e-mail]
Link Plus indicator light
The LED indicator is used to indicate the status of the
Link Plus and also to indicate if there is a connecon
problem (see list on the right).
Connecvity issues
A solid red LED indicates that there is no connecon
to the server. Check that the Ethernet cable is securely
connected to a spare Ethernet port on your Wi router.
If the red LED persists, please contact tech support on
0121 250 3625 or at www.lightwaverf.com.
Firmware updates
Firmware updates are over the air soware improvements
that keep your device up to date as well as providing new
features. Updates generally take 2-5 minutes. The LED
will ash amber whilst new rmware is being downloaded
and solid white during installaon. It is important not to
remove power to the device during this me.
Changing the colour of the indicator LED
The colour of the LED indicator light on the Link Plus
can be personalised or the LED dimmed using the
Lightwave App. See the App for more details.

www.lightwaverf.com [phone] [e-mail]