ligra Luxiboard 6 TOUCH User manual

• Do not expose this whiteboard to rain or
moisture in order to reduce the risk of fire or
electric shock.
• Do not expose this whiteboard to fire,
electric shock and long time direct sunlight.
• Use appropriate expansion bolts to fix the
device to the wall.
• Do not stare directly at the light from the
projector. Especially the kids should be
warned about this.
• Make sure the USB connection between this
device and computer is safe.
• Use only the USB cable provided with the
whiteboard. Other cables might not work
properly with this product.
• Do not touch, cut or scratch the panel and
frame with sharp or hard objects. Do not
drill holes or nail in any place of the product
since it might damage the device.
iWB installation Manual

2
1.2 System Requirements
1.1 Introduction
This interactive whiteboard uses IR scan and sensor technology. It works seamlessly with a projector
and computer as a large touch display. Any projected image can be directly operated by pens or
fingers. Thus, it provides the ideal interactive platform for presentations and lecturers.
Writing: the user can write and draw with pens or fingers directly on the display panel and show
his/hers writing during speech and lecture.
Annotation: the user can operate and annotate over any popular format files including PPT -
WORD - EXCEL - AVI - MPEG - JPEG - PDF - Web Pages etc.
Touch: in working mode, the interactive whiteboard can also be a high precision touch interactive
display. User can use up his/hers fingers or any solid object as a mouse to click and drag directly
on the display panel.
Touch Recognition: the interactive whiteboard can recognize touch and gesture of a single finger,
multifinger, double click, left click and right click.
Driver Free: this product design is in accordance with HID category standard and supports driver
free, plug&play connection to Windows PCs (7/8/10).
Energy: the power consumption is less than 1W. No need for any independent power supply.
1. General informations
Lowest Environmental Requirements
CPU: 1.0GHz×86
Memory: 512 MByte
Display Card: Support 256 or above
Hard Disk:1GByte
Screen Display Resolution
800×600
1024×768
1280×1024
USB1.1 Port
Recommended
CPU: 2.0GHz×86
Memory:
2GB or above
Display Card: Support 256 or above
Hard Disk:2GByte
Screen Display Resolution
1024×768
1280×1024
USB2.0 Port

3
2. iWB installation
2.1 Wall mounting
There are 4 pieces of whiteboard wall mount brackets in the accessory box as follow. Place them
on the wall according to the position of the hooks on the back of whiteboard and fix them with
expansion bolts.

4
3.1 Driver and software installation
Before software installation, exit the antivirus or virus protection softwares in your computer. The
software installation instructions in this manual are based on Microsoft Windows 7 system.
There is an installation disc in the accessory box. Insert the installation disc and you can see
the instructions. You can open the disc by manual if you do not see. Follow the instructions
and complete the installation of the whiteboard software. For complete functions click “Full
Installation” and complete the installation as shown below. The computer needs to be re-
started in order activate the software after the installation is completed. Save all the files in
the computer and restart.
4. Calibration
3. How to Install Software
4.1 Calibration
To work normally, the strokes on the whiteboard should coincide with the actual ones. A proper
calibration is the key to have such precision. The calibration is needeed when:
• the whiteboard is used for the first time.
• the whiteboard softwares have been reinstalled or updated.
• the position of the whiteboard or projector is changed.
• the computer connected to the whiteboard is changed.
• the computer resolution ratio or refresh rate is changed.
• calibration deviation caused by other reasons.

5
Follow these steps:
Step 1
Connect all necessary devices and make sure the whiteboard service program has been auto
runed once the computer is power on. If not, click “Start > All Programs > HHAP > WhiteBoard
Driver > WhiteBoard Driver” and run the whiteboard service program.
Step 2
Wait for seconds and the whiteboard driver icon in taskbar notification area will turn green from red
and this indicates that the device and drive are connected.
The service program icon has two status: Icon turns red when the whiteboard and program are
disconnected; icon turns green when whiteboard can work normally. To work normally, the white-
board and computer should be connected correctly and service program icon is green.
Step 3
Adjust the projection angle and make sure the projection area is within the whiteboard display area.
Step 4
Mouse click the whiteboard service program icon at the bottom right of the screen and you can see
the following panel:
4. Calibration

6
4. Calibration
Click “Calibration” and the whiteboard will be in calibration interface as follows:
Step 4
Vertically touch the centre of the flashing “+“ with the interactive whiteboard pen tip until the flashing
“+“ move to the next calibration point and thus one point is calibrated. Follow the instructions in the
calibration interface and complete the calibration of other points thus the interactive whiteboard
calibration is finished.
Notes
• Calibration with a finger might lead to inaccurate calibration. Calibration with the pens will gain
a better effect.
• Wrong calibration may lead to whiteboard not working and this requires recalibration.
• Pressing “ESC” during calibration can cancel the current calibration operation.
• There are minor differences between the calibration interface of different version softwares. The
calibration, however, is very much the same. For products with shortcut keys, there are shortcut
key calibration and you just need to follow the instructions.
• When a laptop pc with windows system connect a whiteboard touch screen, and set the projec-
tion mode as “Duplicate” mode, in some resolution, the laptop may can’t get full screen display,
then the calibration a ccuracy in the whiteboard touch screen will not be accurate too, so please
select. Others resolution which can be displayed fully by the laptop pc to avoid this problem.