lilitab Flip Pro Mount User manual

Lilitab Flip Pro Mount
Assembly Instructions
v2.0
39 Larkspur Street | Suite B t: 888.705.0190 San Rafael, CA 94901 e: [email protected] www.lilitab.com

Lilitab Flip Pro Mount Assembly Instructions v2.0 2
TABLE OF CONTENTS
Assembly Preparation and Packing List.................2
Features ..........................................3
Assembly Instructions ...............................4
Kensington Lock....................................5
Bolt Down Installation ...............................6
GOT QUESTIONS? WE’RE HERE TO HELP!
EMAIL [email protected]om PHONE [phone]
FOR BASE PLATE INSTALLATION, YOU’LL NEED:
4 Phillips screwdriver
FOR BOLT DOWN INSTALLATION, YOU’LL NEED:
4 Powered drill/driver, preferably with impact action
4 4 x bolts or wood screws (m5, no.10, no.11, 3/16” or
13/64 diameter)
TO SECURE YOUR LILITAB YOU WILL NEED:
4 Kensington compatible cable lock
4 Kensington Desk Mount Anchor
4 Loradar Anchor Plate
PACKING LIST
1 x Flip Pro Mount
2 x MagDOCK Keys
1 x Compact Base
4 x 1/4-28 x 0.375 Compact
Base Screws
INCLUDED
INCLUDED IF YOU ORDERED COMPACT BASE
Scan to watch
assembly videos on
our YouTube Channel!

Lilitab Flip Pro Mount Assembly Instructions v2.0 3
FEATURES
MULTI-POSITION NECK JOINT
Allows the user to tilt the Head Unit.
Head Unit shown for illustrative
purposes only. Your Head Unit
may vary depending upon your
tablet choice. Please refer to
your Head Unit owner manual
for more details.
All Lilitab Head Units do not
cause radio interference.

Lilitab Flip Pro Mount Assembly Instructions v2.0 4
ASSEMBLY INSTRUCTIONS
2. Attach Compact Base. Line up the bottom of
the mount pole with the four screw holes in
the base plate. Secure together using the four
(4) 1/4-28 x 0.375 Compact Base Screws.
NOTE: You may need to hold the foot cover up and
out of your way while securing. If not using the
compact base, attach to stable surface using
template on page 6, and thread the cable through
your substrate.
3. Foot Cover. Slide the foot cover down the
mount pole to cover the screws. Velcro will
hold it in place once positioned.
4. Place your Head Unit onto the MagDOCK
in either landscape or portrait orientation.
Turn the key to lock it in place.
WARNING: Not locking the MagDOCK will result in
the unit falling off, possibly damaging the unit and/
or the tablet. The Lilitab Pro is designed to be
operated with the lock closed.
Refer to your Lilitab Head owner’s manual
for tablet installation instructions.
1. Cable routing. Choose your method of how
you thread your charge cable that came
with your kiosk:
A: Exit out the back of the base cover.
B: Exit through the compact base (no wire
showing). This will require cable routing
through your substrate.
A
B

Lilitab Flip Pro Mount Assembly Instructions v2.0 5
KENSINGTON LOCK
You can use a Kensington Desk Mount Anchor
and the Loradar Anchor Plate with a Kensington
Lockhead to secure your kiosk on a counter/surface.
PURCHASE OPTIONS FROM AMAZON
Kensington Slim Lockhead:
https://amzn.to/3lWAAod
Kensington Desk Mount Anchor:
https://amzn.to/3njssNU
Loradar Anchor Plate:
https://amzn.to/3Ga1wcc

Lilitab Flip Pro Mount Assembly Instructions v2.0 6
Mounting pattern
BOLT DOWN INSTALLATION
1.50
38.10
1.50
38.10
4X M6 OR
1/4-20
1.63
41.44
.71
18
SLOT FOR
POWER CABLE:
USB TYPE A,
~12" PIGTAIL
The Lilitab Surface Basic can be mounted
to any hard surface using 2 x bolts, wood
screws or other fastener suitable for your
surface’s substrate (m6, no.14 or 1/4”
diameter). Use the mounting pattern to
the right for proper alignment.
Power supply
cable can run
under or on
top of surface.