lilitab Keyboard Mount User manual

39 Larkspur Street | Suite B t: 888.705.0190 San Rafael, CA 94901 e: [email protected] www.lilitab.com
lilitab Keyboard Mount
Assembly Instructions
v1.0

lilitab Keyboard Mount Assembly Instructions v1.0 2
TABLE OF CONTENTS
Packing List............................................ 2
Assembly Instructions ................................... 3
GOT QUESTIONS? WE’RE HERE TO HELP!
EMAIL [email protected]om PHONE [phone]
PACKING LIST

lilitab Keyboard Mount Assembly Instructions v1.0 3
ASSEMBLY INSTRUCTIONS
5. Install your tablet into the Head Unit and the
Head Unit onto your Kiosk Mount.
6. Install the Keyboard Tray onto the arms,
using two (2) m4 x 6mm screws.
4. If you are installing the Keyboard Mount onto
a P Head, use the circled arm mount points
shown here.
3. Attach the Keyboard Mount arms to the rear of
your enclosure using the four (4) m4 x 10mm
long screws. Use the appropriate mounts
points for portrait or landscape noted above
(landscape shown).
1. If you selected portrait orientation, your
arm mount points are circled in the photo
to the left.
2. If you selected landscape orientation,
your arm mount points are circled in the
photo to the left.
NOTE: If you selected both portrait and landscape,
all of the mount points circled in the two photos in
step 1 and 2 will be available.
Refer to your lilitab Head owner’s manual
for tablet installation instructions and
your lilitab Mount owner’s manual for
instructions on attaching the head unit.

lilitab Keyboard Mount Assembly Instructions v1.0 4
ASSEMBLY INSTRUCTIONS
8. Peel the protective backing off the VHB tape,
center your keyboard and press down firmly.
7. Find the ideal angle for your Keyboard Mount
and fasten, using two (2) m4 x 6mm screws,
as shown here.