lilitab Wall Pro User manual

39 Larkspur Street | Suite B t: 888.705.0190 San Rafael, CA 94901 e: [email protected] www.lilitab.com
Lilitab Wall Pro Mount
Assembly Instructions
v5.0

Lilitab Wall Pro Mount Assembly Instructions v5.0 2
FOR MOUNTING, YOU’LL NEED:
4 4 x flat-head mount screws suitable for your wall surface
PACKING LIST
1 x Wall Pro Mount
2 x Bumper Plate
2 x MagDock Keys
1 x Silver L Key
TABLE OF CONTENTS
Assembly Preparation and Packing List.............2
Features ......................................3
Assembly Instructions ...........................4
GOT QUESTIONS? WE’RE HERE TO HELP!
EMAIL [email protected]om PHONE [phone]
Scan to watch
assembly videos on
our YouTube Channel!

Lilitab Wall Pro Mount Assembly Instructions v5.0 3
FEATURES
MULTI-POSITION NECK JOINT
Permits tilt up/down.
It has two operator configurable modes:
1. Fixed. The Head Unit can be set to any fixed +/-35° angle.
2. Tilt. Can be configured to allow the user to tilt the Head Unit.
KEYLOCK
Turn the key to dock/undock your Head Unit.
When the Head Unit is docked it automatically
begins charging. Head Unit can be docked in
any orientation.
NOTE: Ensure the Head Unit is locked when
docked. Tilting or using the Head Unit
without the lock engaged will cause it to
fall off.
Head Unit shown for illustrative
purposes only. Your Head Unit
may vary depending upon your
tablet choice. Please refer to
your Head Unit owner manual f
or more details.

Lilitab Wall Pro Mount Assembly Instructions v5.0 4
ASSEMBLY INSTRUCTIONS
1. Use the bumper plate appropriate to your
deployment to mark screw locations
on your wall.
NOTE: If you are routing the charge cable through
your wall substrate, trace the oval opening in the
center of the bumper plate to mark the area that
you will need to cutout to pass the cable through.
2. Attach Wall Pro Mount to bumper plate using
four (4) flathead screws appropriate for your
wall substrate (not included).
NOTE: Ensure the bumper plate is positioned
between the mount arm and wall in the desired
orientation to prevent the unit from hitting the wall
when positioned.
3. Place your Head Unit onto the MagDOCK
in either landscape or portrait orientation.
Turn the key to lock it in place.
WARNING: Not locking the MagDOCK will result in
the unit falling off, possibly damaging the unit and/
or the tablet. The Lilitab Pro is designed to be
operated with the lock closed.
4. Tilt feature. By default the Head Unit can be
tilted by the user to suit. If you wish to disable
tilt, position your head unit at the desired
angle and tighten the bottom screw on the
neck joint with the black L key provided.
Refer to your Lilitab Head Unit owner’s
manual for tablet installation instructions.