lilitab Keyboard Mount User manual

39 Larkspur Street | Suite B t: 888.705.0190 San Rafael, CA 94901 e: [email protected] www.lilitab.com
Lilitab Keyboard Mount
Assembly Instructions
v1.0

Lilitab Keyboard Mount Assembly Instructions v1.0 2
TABLE OF CONTENTS
Packing List............................................ 2
Assembly Instructions ................................... 3
GOT QUESTIONS? WE’RE HERE TO HELP!
EMAIL [email protected]om PHONE [phone]
PACKING LIST
1 x Keyboard Tray with VHB Tape
2 x Keyboard Mount Arms
1 x Key Extender
1 x Black L Key
HARDWARE FOR H, K, & P LANDSCAPE ORIENTATION
AND H & P PORTRAIT ORIENTATION
4 x M4 x 8mm
4 x M4 x 6mm
HARDWARE FOR K PORTRAIT ORIENTATION
4 x M3 x 6mm
4 x M4 x 6mm
1 x Silver L Key

Lilitab Keyboard Mount Assembly Instructions v1.0 3
ASSEMBLY INSTRUCTIONS
5. Install your tablet into the Head Unit and the
Head Unit onto your Kiosk Mount.
6. Install the Keyboard Tray onto the arms,
using two (2) m4 x 6mm screws and
black L key.
4. For a P Head Unit, use the circled arm mount
points shown here.
3. Attach Keyboard Mount Arms to the rear
of your enclosure. For K & H Landscape,
H Portrait, P Landscape & Portrait use
four (4) m4 x 8mm long screws and
black L key. For K Portrait four (4) m3 x 6mm
and silver L key.
NOTE: See Step 4 for P Head install.
1. If you selected portrait orientation, your
arm mount points are circled in the photo
to the left.
2. If you selected landscape orientation,
your arm mount points are circled in the
photo to the left.
NOTE: If you selected both portrait and landscape,
all of the mount points circled in the two photos in
step 1 and 2 will be available.
Refer to your Lilitab Head Unit owner’s manual
for tablet installation and your Lilitab Mount
owner’s manual for attaching the Head Unit.
OR

Lilitab Keyboard Mount Assembly Instructions v1.0 4
ASSEMBLY INSTRUCTIONS
8. Peel the protective backing off the VHB
tape, center your keyboard and press
down firmly.
7. Find the ideal angle for your Keyboard Mount
and fasten, using two (2) m4 x 6mm screws
and black L key.
9. Key Extender. Use the Key Extender to turn
MagDOCK Key (for Pro Kiosks), as the Keyboard
Mount arms make it hard to reach by hand.
MagDOCK Keys ship with your Pro kiosk.