Lilliput 619AT User manual

TFT LCD COLOR
MON IT OR

DEAR CUS T OMERS
Thank you for purchasing the liquid crystal display monitor. This product employs
new integrate circuits and high quality TFT LCD modules. It is putting out with its
low power consumption, emits no radiation, and other advantage characteristics. This
product is shaped with modern style and is easy to be carried with. The color TFT
LCD is the most suitable display for VGA, VCD, DVD and GPS system for
motorcars and ships. It also can be used in the office, in flat, at home also in other
suitable position. You will certainly benefit from this monitor in lots of ways, to name
some of them: convenience, safety, space-saving.
We hope that you will have the enjoyment of your new mini color TFT LCD.
T o en s u r e t h e best u se of t h e unit, please r ead th is h a nd book carefully b efor e h a n d.
CAUTION
1. Please use the adapter attached in the accessory.
2. Do not expose this product to direct sunlight, heat or humid conditions.
3. Keep away from strong light while using this product so as to obtain the
clearest and the most colorful picture.
4. Please avoid heavy impact or drop onto the ground.
5. Do not use chemical solutions to clean this unit. Please simply wipe with a
clean soft cloth to keep the brightness of the surface.
6. If the product does not operate normally when the instructions are followed.
Adjust only those controls that are covered by the instructions. Improper
adjustment of other controls may result in damage and will often require
extensive work of a qualified technician.

CONTENTS
1. PRODUCT DESCRIPTION --------------------
2. REMOTE CONTROL----------------------------
3. MATCHED CABLES-------------------------
4. MENU OPERATION ----------------------------
IN AV MODE--------------------------------------
IN PC MODE--------------------------------------
IN DVI&HDMI MODE--------------------------
5. ACCESSORIES ------------------------------------
6. PARAMETER --------------------------------------
7. TROUBLESHOOTING ---------------------------
8. REMARK----------------------------------------

1. PRODUCT DESC R I PT ION
Pic ture
1. Indication light: Red is off, green is standby.
2. Power switch
3. A/V: PC、DVI、VIDEO1、VIDEO2 and HDMI switch .
4. “ ∨ ”: Volume down or to adjust the value of menu setting function
5. IR Sensor for remote control
6. “ ∧ ”: Volume up or to adjust the value of menu setting function mode
7. MENU: To activate OSD menu
（ PS: Long press "MENU" button to zoom in or out picture automatically w h e n
r ece ivin g HDMI signal.)
8. “<”: Selection key, to select item on the OSD or push the key in PC mode directly to adjust
phase automatically
9. “>”: To select function on OSD or to adjust the brightness directly under 6 classes

10. DC 12V
11. DVI 、 HDMI input
12. 14P SKS input
2. RE M OT E CON TROL
1. MUTE
2. Display mode switch: PC、DVI、VIDEO1、VIDEO2 and HDMI
switch
3. : Left move，Volume down or to adjust the value of setting
function
4. : Down move, to adjust phase automatically under PC mode
5. POWER: ON/OFF
6. ：UP move, to adjust the brightness directly under 6 classes
7. : Right move, Volume up or to adjust the value of setting
8. MENU

3. MATCHEDCABLES
Match cable
SKS cable:
1 14P SKS Input Jack: all kinds of AV signal input, note that put it correctly into the
SKS input jack of the monitor
2 Black 9-pin VGA signal input jack
3 Yellow RCA: Video signal 1 input
4 Yellow RCA: Video signal 2 input
5 White RCA: Audio signal input
6 Black Jack: DC 12V Power input
VGA cable :
1. Black 9-pin VGA connector, contact to the 9-pin VGA signal input jack of SKS
cable.
2. USB end connect the USB port of computer for touch screen function.
3. 15-pin VGA signal input end connect VGA port of the computer
HDMI connect DVI cable ( opt ional ):
1. HDMI signal input end
2. DVI signal input connect with device with DVI signal
3. USB connect with the USB port of computer for touch function (optional)

HDMI connect HDMI cable ( option al):
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function (optional)
4. M EN U O PE R A TION
After connected correctly and then Power on, Press “MENU” on the unit or by
remote control to show MENU
IN AV MODE IN PC MOD E :
As follows :
OSD MISCEL LAN EOUS

IN DVI & HDMI MODE
DVI MODE HDMI MODE
As follows :
OSD MISCELLANEOUS OF DVI MODE OSD MISCELLANEOUS OF HDMI MODE
Press “ ＞ / ＜ ”on the unit or “ / ” on the remote control to select item, eg. ,
and it will be highlighted; and then press ∧ / ∨ of the unit or / to adjust the
favorite values. It shows current picture format (NTSC&PAL) below the dialog
box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST ： to adjust the level of contrast
SATURATION: to adjust the level of saturation
TINT: to adjust the hue of image
SHARPNESS: to adjust the level of sharpness

LANGUAGE: There are 2 languages provided for choice, English and
Chinese
RESET: you can reset adjustment of the unit when click “YES”
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
OSD DURATION: to adjust the duration of OSD from5-100seconds.
Picture over-turn to left or right
Picture over-turn to up or down
Mode shift between 4:3 and 16:9
EXIT OSD: select “YES” to exit
PHASE ： to adjust the beginning point and terminal point of image
FREQUENCY: to adjust the frequency range of image
OSD H-POSITION ： to adjust the picture position in horizontal direction
OSD H-POSITION ： to adjust the picture position in vertical direction
COLOR TEMPERATURE ： choose color and temperature at first, such as:
6500
0
K, 7500
0
K or 9300
0
K.
Only if under “USER” mode, can adjust RED, GREEN and
BLUE to meet the color value you need.
MISCELLANEOUS ： to select to enter next page
OSD AUTO COLOR ： If select “YES” it will adjust automatic color system to
the best

5. AC CE SS ORI ES
1. Remote control 1piece
2. Bracket 1piece
3. Touch pen 1piece (optional)
4. Drive disk 1piece (touch driver, please choose and install
correct touch driver as per your
PC OS)
5. Home DC adapter 1piece
6. Car power (pass CE) 1piece
7. 14PIN SKS 1Piece
8. VGA cable 1piece (MD connect HDB 15pin VGA cable)
9. HDMI to HDMI cable 1piece (optional)
10. HDMI to DVI cable 1piece (optional)
11. Manual 1copy