Lilliput PVM210 User manual

1
Important Safety Instructions
The device has been tested for conformance to safety regulations and requirements, and has
been certified for international use. However, like all electronic equipment, the device should
be used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Please do not place the display screen towards the ground to avoid scratching the LCD surface.
Please avoid heavy impact.
Please do not use chemical solutions to clean this product. Simply wipe with a soft cloth to keep clean
of the surface.
Please do not place on uneven surfaces.
Please do not store the monitor with sharp, metallic objects.
Please follow the instructions and trouble-shooting to adjust the product.
Internal adjustments or repairs must be performed by a qualified technician.
Please keep user guide for future reference.
Please unplug the power and remove the battery if long-term no-use, or thunder weather.
Safety Disposal For Old Electronic Equipment
Please do not regard the old electronic equipment as municipal waste and do not incinerate old electronic
equipment. Instead please always follow local regulations and hand it over to the applicable collection stand
for safe recycling. Ensure that these waste materials can be effectively disposed of and recycled to prevent
our environment and families from negative effects.

2
Introduction
This monitor is wide field of vision is matched with excellent color space, which reproduced the colorful
world with the most authentic elements.
Features
HDMI1.4 supporting 4K 30Hz.
3G-SDI input & loop output.
1000cd/㎡high brightness.
1920X1080 high resolution.
Support multiple video input interfaces: SDI, HDMI, VGA, AV.
FN User-definable function button.
HDR supporting HDR10_300, HDR10_1000, HDR10_10000, HLG.
Color Temperature (6500K, 7500K, 9300K, User).
Markers & Aspect Mat (Pixel to pixel, Zoom, Aspect ).
Scan (Fullscan, Underscan, Overscan).
Marker color (Red, Green, Blue, Mono).

3
CONTENTS
1. Production Description........................................................................................4
1.1 Front Panel................................................................................................... 4
1.2 Rear Panel.....................................................................................................5
1.3 Supported Mounting Ways..........................................................................6
2. Menu Settings......................................................................................................7
2-1. Shortcut Button...........................................................................................7
2-1-1. Menu /▷/◁Button........................................................................... 7
2-1-2. FN Button............................................................................................7
2-2. Menu Operation..........................................................................................8
2-2-1. PICTURE.............................................................................................. 8
2-2-2. MARKER.............................................................................................. 9
2-2-3. FUNCTION.........................................................................................11
2-2-4. VGA................................................................................................... 12
2-2-5. AUDIO............................................................................................... 13
2-2-6. SYSTEM............................................................................................. 14
3. Parameter.......................................................................................................... 16
4. Accessories........................................................................................................ 17
5. Trouble Shooting............................................................................................... 17

4
1. Production Description
1.1 Front Panel
1) Power Button.
2) FN button, can be set by [Menu]-[System]-[FN Configuration].
Default: [Level Meter]
3) EXIT Button.
4) ▷Button: Press it to increase volume when power on; Select options downward in the menu.
5) ◁Button: Press it to decrease volume when power on; Select options upward in the menu.
6) MENU Button: Press it to display the menu on the screen when power on. Press it to confirm the option
selected.
7) INPUT Button: Switch among of AV, VGA, HDMI and SDI signals.
8) Brightness Sensor
9) Power Light (Red/Green).

5
1.2 Rear Panel
1) Power input: DC 12V.
2) Earphone input(3.5mm).
3) Audio input.
4) Video input.
5) VGA input.
6) HDMI 1.4 input.
7) USB 2.0 (for upgrade).
8) SDI output.
9) SDI input.
10) Speaker*2.

6
1.3 Supported Mounting Ways
Desktop
Standing on the table by installing the desktop bracket on the bottom of the monitor.
Wall mount
Installed and fixed on the standard VESA bracket through VESA 75mm holes on its rear panel.

7
2.Menu Settings
Before setting the functions, please make sure the device is connected correctly.
2-1. Shortcut Button
2-1-1. Menu /▷/◁Button
lPress MENU button, the menu will pop up on the screen. Then select item as the following sequences
via pressing ▷/◁button: PICTURE / MARKER / FUCTION / VGA / AUDIO / SYSTEM. Press MENU
button again to enter into the item you select.
lPress ▷/◁button to adjust options or values in the selected item. Then press MENU or EXIT button
to apply and save the setting.
lWhen Menu is inactivated, press ▷/◁button to adjust volume. Then select item as the following
sequences via pressing MENU button: Brightness / Contrast / Saturation / Tint / Sharpness and Exit.
Press ▷/◁button again to adjust the value in the selected item.
2-1-2. FN Button
Press Menu button, select [System]-[FN Configuration] to set the FN button function. User can set the FN
button function: Center Marker / Aspect Marker/ Check Field/ Display Scan/ Scan/ Aspect/ Freeze/ HDR/
Level Meter.
Default: Level Meter.

8
2-2. Menu Operation
Before setting the functions, please make sure the device is connected correctly.
2-2-1. PICTURE
Marker
Brightness
0 - 100
Contrast
0 - 100
Saturation
0 - 100
Tint
0 - 100
Sharpness
0 - 100
HDR
Off, HDR10_300, HDR10_1000, HDR10_10000, HLG
Color Temp.
6500K, 7500K, 9300K, USER
- Brightness -
Adjust the general brightness of the LCD from [0]-[100]. For example, if the user is outside in bright
conditions, increase the LCD brightness to make it easier to view.
- Contrast -
Increases or decreases the range between the bright and dark areas of the image. High contrast can reveal
detail and depth in the image, and low contrast can make the image appear soft and flat. It can be adjusted
from [0]-[100].
- Saturation -
Adjust the color intensity from [0]-[100]. Turn the knob right to increase the color intensity and turn left to
decrease it.
- Tint -
It can be adjusted from [0]-[100]. Affect the resulting color mixture’s relative lightness.

9
- Sharpness -
Increase or decrease the sharpness of the image. When the image sharpness is insufficient, increase the
sharpness to make the image clearer. It can be adjusted from [0]-[100].
- HDR -
Options: [Off], [HDR10_300], [HDR10_1000], [HDR10_10000], [HLG].
Note: Only available under SDI and HDMI mode.
- Color Temp. -
[6500K], [7500K], [9300K] and [User] mode for optional.
Adjust the color temperature to make the image warmer (Yellow) or colder (Blue). Increase the value to
make the image be warmer, decrease the value to make the image be colder. User can use this function to
strengthen, weaken or balance the image color according requirements. The standard white light color
temperature is 6500K.
Color Gain/Offset is available only under “User” mode to choose the color value.
2-2-2. MARKER
Marker
Center Marker
ON, OFF
Aspect Marker
OFF, 1.85:1, 2.35:1, 4:3, 3:2
Safety Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
Marker Color
Red, Green, Blue, White, Black
Grid
OFF, ON
Aspect Mat.
OFF, 1, 2, 3, 4, 5, 6, 7
Thickness
2, 4, 6, 8

10
- Center Marker -
Select On, it will appear "+" marker on center of screen.
- Aspect Marker -
The Aspect Marker provides various aspect ratios, as the following:
[OFF], [2.35:1], [1.85:1], [4:3], [3:2]
- Safety Marker -
Used to select and control the size and availability of the safety area. Available type are [OFF], [95%], [93%],
[90%], [88%], [85%], [80%] preset to choose.
- Marker Color -
Select the color of marker displayed on the screen: [Red], [Green], [Blue], [White], [Black].
- Grid -
Options: [ON], [OFF].
- Aspect Mat.-
When activated, it can be selected from 1-7 (Step value is 1).
- Thickness-
Adjust the thickness of all the marker lines from[2], [4], [6], [8] (Step value is 2).

11
2-2-3. FUNCTION
Function
Scan
Aspect, Pixel To Pixel, Zoom
Aspect
Full, 1.85:1, 2.35:1, 4:3, 3:2
Display Scan
Fullscan, Overscan, Underscan
Check Field
OFF, Mono, Red, Green, Blue
Zoom
X1.5, X2, X3, X4
Freeze
OFF, ON
- Scan -
Use this menu option to choose Scan mode. There are three modes preset:
Aspect
Select Aspect under Scan option, then use Aspect option to switch between several aspect ratio setting. For
example:
In 4:3 mode, images are scaled up or down to fill the maximum 4:3 portion of the screen.
In Full mode, images are scaled to fill the entire screen.
Pixel to Pixel
The pixel to pixel is a monitor set to 1:1 pixel mapping with native fixed pixels, which avoids loss of
sharpness due to scaling artifacts and normally avoids incorrect aspect ratio due to stretching.
Zoom
The image can be enlarged by [X1.5], [X2], [X3], [X4] ratios. To select the [Zoom] under [Scan], choose the
times under [Zoom] option which underneath the Check Field option.
Note! Zoom option can ONLY be activated when user select [Zoom] mode under [Scan] function.
- Aspect -
Select the aspect of the image among [Full],[1.85:1], [2.35:1], [4:3], [3:2].

12
- Display Scan -
If the image shows size error, use this setting to zoom in/out pictures automatically when receiving signals.
The scan mode can be switched among [Fullscan], [Overscan], [Underscan].
- Check Field -
Use the check field modes for monitor calibration or to analyze individual color components of an image. In
[Mono] mode, all color is disabled and only a grayscale image is shown. In [Blue], [Green], and [Red] check
field modes, only the selected color will be shown.
Note! DSLR is available ONLY under HDMI mode.
- Freeze -
Activate freeze function to freeze current picture when playing the video.
2-2-4. VGA
VGA
Auto
ON, OFF
Phase
0 - 100
Clock
0 - 100
H-Position
0 - 100
V-Position
0 - 100

13
- Auto -
Select [On], the monitor can automatically adjust the position of the image. Select [Off], users can
manually adjust the position of the image.
- Phase-
Adjust internal phase sequence difference. Adjustable range: 0-100.
- Clock -
Adjust internal oscillation frequency when interference occurs. Adjust this item, the image can be
compressed or stretched left or right. Adjustable range: 0-100.
- H-Position -
Horizontally adjust the position of the image on the screen. Adjustable range: 0-100.
- V-Position-
Vertically adjust the position of the image on the screen. Adjustable range: 0-100.
Note! Only available under VGA mode.
2-2-5. AUDIO
- VGA, VIDEO mode - - SDI mode - - HDMI mode -
- Volume -
To adjust the volume from [0]-[100] for the built in speaker and earphone jack audio signal.
- Level Meter -
The left side of the on screen meters displays level meters showing audio levels for channels 1 and 2 of the
input source. It features peak hold indicators which stay visible for a short time so the user can clearly see
the maximum levels reached.
To achieve optimum audio quality, ensure the audio levels do not reach 0. This is the maximum level,
meaning that any audio that exceeds this level will be clipped, resulting in distortion. Ideally peak audio
levels should fall in the upper end of the green zone. If the peaks enter into the yellow or red zones, the
audio is in danger of clipping.
AUDIO
Volume
0 - 100
Level Meter
OFF, ON
Audio Channel
CH0&1, CH2&3, CH4&5, CH6&7, CH8&9, CH10&11,
CH12&13, CH14&15

14
- Audio Channel -
The monitor can receive 16 channels audio from SDI signal. The audio channel can be changed among
[CH0&CH1], [CH2&CH3], [CH4&CH5], [CH6&CH7], [CH8&CH9], [CH10&CH11], [CH12&CH13], [CH14&CH15]
2-2-6. SYSTEM
System
Language
English, 中文
OSD Timer
10s, 20s, 30s
OSD Transparency
Off, low, Middle, High
Image Flip
Off, H, V, H&V
Auto Backlight
Off, ON
Back Light
0 - 100
FN Configuration
Center Marker / Aspect Marker / Check Field / Display
Scan / Scan / Aspect / Freeze / Level Meter
Reset
OFF, ON
- Language -
Switch between [English] and [Chinese].
- OSD Timer -
Select the displaying time of the OSD. It has [10s], [20s], [30s] preset to choose.
- OSD Transparency -
Select the transparency of the OSD from [Off] → [Low] → [Middle] → [High]
- Image Flip -
The monitor support [H], [V], [H/V] three preset Flip modes.

15
- Auto Backlight-
Select On, the Auto Backlight function can be automatically adjusted according to the ambient brightness.
- Back Light -
Adjusts the level of the back light level from [0]-[100]. If the back light value is increased, the screen
becomes brighter.
- F1 Configuration -
Select "F1 Configuration" for setting. Functions: [Level Meter] → [Center Marker] → [Aspect Marker] →
[Check Field] → [Display Scan] → [Scan] → [Aspect] → [Freeze]→ [HDR].
Default function: [Level Meter]
- Reset -
If there is any problem unknown, press to confirm after selected. The monitor will return to default settings.

16
3. Parameter
*Tip: Due to constant effort to improve products and product features, specifications may change without notice.
Display
Display Screen
21.5" LCD
Physical Resolution
1920×1080
Aspect Ratio
16:9
Brightness
1000 cd/m²
Contrast
1000: 1
Viewing Angle
160°/ 160°(H/V)
Power
Input Voltage
DC12-24V
Power Consumption
≤36W
Source
Input
HDMI1.4 x1
Signal Format
3G-SDI LevelA/B
1080p(60/59.94/50/30/29.97/25/24/23.98/24sF/30sF/29.97sF/25sF/23.98sF)
1080i(60/59.94/50)
HD-SDI
1080p(30/29.97/25/24/23.98/30sf/29.97sf/25sf/24sf/23.98sf)
1080i(60/59.94/50)
720p(60/59.94/50/30/29.97/25/24/23.98)
SD-SDI
525i(59.94)
625i(50)
HDMI1.4
2160p(30/29.97/25/24/23.98)
1080p(60/50/30/29.97/25/24/23.98)
1080i(60/50)
Ear Jack
3.5mm
Environment
Operating
Temperature
0℃~50℃
Storage Temperature
-10℃~60℃
General
Dimension (LWD)
524.8×313.3×44.5mm
Weight
5.1kg

17
4. Accessories
1) 15V DC Adapter 1 piece
2) HDMI A/A cable 1 piece
3) VGA cable 1 piece
4) VIDEO cable 1 piece
5) AUDIO cable 1 piece
6) Base bracket 1 pair
5. Trouble Shooting
1. Only black-and-white display:
Check whether the color saturation and check field are properly setup or not.
2. Power on but no pictures:
Check whether the cables of HDMI, and 3G-SDI are correctly connected or not. Please use the standard
power adapter coming with the product package. Improper power input may cause damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not. Broken or loose pins of the
cables may cause a bad connection.
4. When on the picture shows size error:
Press [MENU] → [Function] →[Aspect] to zoom in/out pictures automatically when receiving HDMI
signals
5. Other problems:
Please press Menu button and choose [MENU] → [System] → [Reset] → [ON].
6. According to the ISP, the machine can not function properly:
ISP for program upgrades, non-professionals do not use. Please reboot your device if press accidentally!

18
7. Image Ghosting:
If continue to display the same image or words on the screen for a long period of time, part of that
image or words may burn into the screen and leave a ghosting image behind. Please understand it 's
not quality issue but the character of some screen, so no warranty/return/exchange for such situation.
8. Some options can not be select in the Menu:
Some options are available only in a certain signal mode, such HDMI, SDI or VGA. Some options are
available only when a certain feature is turned on. For example, Zoom function shall be set after
following steps: [Menu] → [Function] → [Scan] → [Zoom] → [Exit] → [FN] → [Zoom].
Note: Due to constant effort to improve products and product features, specifications may change without
priority notice.