Lindy Modular Fast Fiber Switch Converter MT-RJ User manual

Modular Fast Fiber Switch Converter
n SC/ST/MT-RJ/VF-45
n Multi-Mode /Single Mode Fiber
n 10/100Base-Tx to 100FX
n Auto MDI/MDI-X on UTP port
n IEEE 802.3/IEEE 802.3u
n Store and Forward
n Filter abnormal packet
n IEEE 802.3x Flow Control
n Link lose forwarding- User site,
Central site modes The Lantech modular Fast Fiber switch converter
provides varies type fiber connector for fiber
connectivity, also support single mode fiber and
multi-mode fiber use for different link distance.
For easily detects the link status, the Fast Fiber
switch converter supports “Link Lose
Forwarding” (LLF) function for two modes – User
site and Central side mode via a DIP selection.
On user site, if the UTP port link down , the
system will also link down the fiber until the
UTP link is recovered. On central site, if the
Fiber port link down, system will link down the
UTP link until the Fiber link is recovered.
The Lantech modular Fast fiber switch converter
can be used as a standalone unit or slide in a 19
inch rack-mount 10 slot chassis.

SPECIFICATION
Standards
Protocol
Forwarding Rate
Connector
Network cable
Wavelength
DIP Switch
MAC address
Buffer
Packet Size
LED
Dimension
Operating Temp.
Operating Humidity
External Power
Power consumption
Weight
EMI
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-Tx Fast Ethernet
ANSI/IEEE 802.3 Auto-Negotiation
IEEE 8023.x Flow control on Half/Full Duplex
CSMA/CD
14880 PPS for 10Mbps
148800 PPS for 100Mbps
One STP RJ-45 connector
One fiber connector: SC/ST/MT-RJ/VF-45
10BASE-T: 2-pairs UTP/STP Cat.3,4,5 cable
100BASE-TX: 2-pairs UTP/STP Cat.5 cable
100BASE-FX:Single mode fiber (8/125um, 9/125um)
multi-mode fiber (50/125um, 62.5/125um)
Fiber Distance: Multi-mode fiber(2KM)
Single-Mode fiber (15/30/60 KM)
Multi-mode: 850nm
Single-Mode: 1310nm
DIP Switch 1: UTPAuto-Nego/10Mbps Full Duplex mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF(Link Lose Forwarding) Enable/Disable
DIP Switch 4: UTP LLF (for User Site)
Fiber LLF (for Central Site)
1K Mac address table with auto learning
1MB
64 to 1518 Bytes (No VLAN tag)
68 to 1522 Bytes (with VLAN tag)
Per port: Speed, Link/Activity, Full/Collision
Per Unit: Power
155mm x 72mm x 19mm( L x W x H)
0 to 45 (
*!
10% to 90% ( Non-condensing)
Input: 100~240 VAC,50~60HZ; DC 5V @ 2.5A
4.2 Watts
307g
FCC A, CE