Link CT400 Datasheet

223 15th St. N.E.
Sioux Center, IA USA
51250-2120
www.linkmortuaryequipment.com
QUESTIONS?
CALL CUSTOMER
SERVICE
1-800-248-3057
ASSEMBLY
INSTRUCTIONS AND
PARTS LIST
CT400 CASKET TRUCK
(7803B000)
78033009
AUG 4, 2023
Estimated weight : 37 lbs.
Link Mortuary Equipment, a division of Link Mfg., Ltd.
www.linkmortuaryequipment.com

2
IMPORTANT: IT IS IMPORTANT THAT THE ENTIRE INSTALLATION INSTRUCTIONS BE READ THOROUGHLY BEFORE PRO-
CEEDING WITH THE INSTALLATION.
1. INTRODUCTION
Thank you for choosing a Link Mortuary Equipment CT400 Casket Truck. We want to help you get the best results from this casket truck
and to operate it safely. This instruction contains information to assist in the installation of the Link Mortuary Equipment CT400. This in-
struction is intended solely for use with this product.
All information in this instruction is based on the latest information available at the time of printing. Link Manufacturing reserves the right
to change its products or manuals at any time without notice.
Damaged components should be returned to Link with a pre-arranged Returned Materials Authorization (RMA) number through the Cus-
tomer Service Department. The damaged component may then be replaced if in compliance with warranty conditions.
Assembly:
A. The casters of the CT400 are removed for shipping purposes. Insert the casters (Item #4) as shown below. Make sure the holes in
the caster stems line up with the holes in the frame.
B. Insert the provided fasteners (Items #1 and 2) through the holes and tighten to secure the casters to the casket truck.
C. This product is rated for a load of 750 lbs. Max.
D.Call Link Mfg. at 1-800-248-3057 with any questions or
comments.
LINK® MODEL
“CT400” (7803B000)
PARTS LIST
ITEM PART NUMBER DESCRIPTION QTY
1 1401-0810 1/4 X 1 1/4 UNC HEX CAP SCR (GR 5) 4
2 1476-0800 1/4 UNC HEX CTR LOCK NUT (GR B 4
314420806 1/4 X 3/4 UNC PAN HD PH MACH SCR, ZINC 4
415040035 CASTER-5 X 1 1/4 4
515070057 PLUG, 1 INCH SQ. X 18 GA 4
615070058 PLUG, 1 INCH SQ X 16 GA 8
715070059
CAP-INSERT, 1/4-20 THREADED 1" SQ X 16GA
4
815070407 BUMPER-RECESSED, 1.50 O.D. X .63 H 4
2. OPTIONAL ACCESSORIES
The optional Extension Bracket Kit (7803B001) can be slid into the CT400 Casket Truck as shown below to extend the frame.
LINK® EXTENSION
BRACKET KIT
(7803B001)
PARTS LIST
ITEM PART# DESCRIPTION
QT
Y
115070058 PLUG, 1INCH SQ X 16GA 4
278033015 BRACKET-EXTENSION 2

3
PART NUMBER DESCRIPTION
78032006 SKIRT-CT400 (BORDEAUX)
78032007 SKIRT-CT400 (HUNTER GREEN)
78032008 SKIRT-CT400 (BLACK)
78032009 SKIRT-CDS300 (NAVY BLUE)
A 20 x 188” skirt (not shown) can then be wrapped around all four sides of the frame, It is attached using hook and loop (Velcro) around
the perimeter (See Velcro attachment on this page)
The following skirts are available:
LINK® SKIRT
OPTIONS
VELCRO PLACEMENT
FRONT AND REAR VIEWS
VELCRO PLACEMENT LEFT
AND RIGHT SIDE VIEWS

223 15TH ST. NE, SIOUX CENTER, IA 51250
1-800-248-3057
www.linkmortuaryequipment.com