Linksys Small Business SPA2102 Operation manual

PRODUCT DATA
SPA2102
Voice Adapter with 2 FXS and 2 Ethernet Ports
Model No.
Ready Voice Adapter
Solution for VoIP
Toll Quality Voice and Carrier-
Grade Feature Support
The SPA2102 delivers clear,
high-quality voice communica-
tion in a variety of network con-
ditions. Excellent voice quality in
challenging, changeable IP
network environments is made
possible via our advanced im-
plementation of standard voice
coding algorithms. The SPA2102
is interoperable with common
telephony equipment like fac-
simile, voicemail, PBX/KTS and
interactive voice response sys-
tems.
Large-Scale Deployment and
Management
The SPA2102 offers all the key
features and capabilities with
which service providers can
provide customized services to
their subscribers. The SPA2102
can be remotely provisioned
and supports dynamic, in-
service software upgrades. A
secure profile upload saves
providers the time, expense
and hassle of managing and
pre-configuring or re-configur-
ing customer premises equip-
ment (CPE) for deployment.
Ironclad Security
The SPA2102 supports secure,
encryption-based methods for
communication, provisioning
and servicing.

Telephony
• Two voice ports (RJ11) for analog phones or Fax machines
• Impedance Agnostics - 8 Configurable Settings
• Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
• Caller ID with Name/Number (Multi-national Variants)
• Caller ID Blocking
• Call Forwarding: No answer, Busy, All
• Do Not Disturb
• Call Transfer
• Three-way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return
• Call Back on Busy
• Call Blocking with Toll Restriction
• Delayed Disconnect
• Distinctive Ringing - Calling and Called Number
• Off-hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold
• Fax: G.711 Pass Through or Real Time Fax over IP via T.38
• 1 - SPA2102 Phone Adapter Unit
•1-5vPowerAdapter
• 1 - RJ45 Ethernet Cable
• 1 - Quick Installation Guide
PRODUCT DATA
Features
SPA2102
Model No.
Package Contents
SPA-2102
* Note: Many specifications are programmable within a defined range or list of options.
Please see the SPA Administration Guide for details. The configuration profile is up-
loaded to the SPA2102 at the time of provisioning.
MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
DHCP Server - Dynamic Host Configuration Protocol (RFC 2131)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
SNTP - Simple Network Time Protocol (RFC 2030)
Upload Data Rate Limiting - Static and Automatic
QoS - Voice Packet Prioritization over Other Packet Types
Router or Bridge Mode of Operation
MAC Address Cloning
Port Forwarding
SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks - NAT (incl. STUN)
Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
Codec Name Assignment
G.711 (A-law and µ-law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic Payload
Adjustable Audio Frames per Packet
Fax Tone Detection Pass-Through
Fax Pass-Though - Using G.711
Model
Data Networking
Voice Gateway
Voice Algorithms
Fax Capability
Specifications

PRODUCT DATA
SPA2102
Model No.
Security
Provisioning,
Administration &
Maintenance:
Physical Interfaces:
Subscriber Line
Interface Circuit
(SLIC):
Regulatory
Compliance:
Power Supply:
Indicator Lights/LED:
Documentation:
Dimensions
Unit Weight
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
Flexible Dial Plan Support with Interdigit Timers and IP Dialing
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation (G.165/G.168)
VAD - Voice Activity Detection with Silence Suppression
Attenuation / Gain Adjustments
Flash Hook Timer
MWI - Message Waiting Indicator Tones
VMWI - Visual Message Waiting Indicator via FSK
Polarity Control
Hook Flash Event Signaling
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions
Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Up to 256-bit AES Encryption
Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable
Per Line and Purpose Configurable Syslog and Debug Options
2 100baseT RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Ring Voltage: 40-55 VRMS Configurable *
Ring Frequency: 10 Hz - 40 Hz *
Ring Waveform: Trapezoidal and Sinusoidal *
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
On-hook voltage (tip/ring): -50 V NOMINAL
Off-hook current: 25 mA min
Terminating Impedance: 8 Configurable Settings including
North America 600 ohms, European CTR21
FCC (Part 15, Class B) , CE, ICES-003
Switching Type (100-240v) Automatic
DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Power, Internet, Phone 1, Phone 2
Quick Installation, User, and Configuration Guides are downloaded from
www.linksys.com
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only
3.98 x 3.98. x 1.10 in (101 x 101 x 28 mm) W x H x D
5.29 oz (0.15 kg)
32º~113ºF (0º~45ºC)
-13º~185ºF (-25º~85ºC)
10~90% Non-condensing
10~90% Non-Condensing
Specifications
Environmental

Inexpensive, easy to install and simple-to-use, the SPA2102 connects a standard
telephone or fax machine to IP-based data networks. VoIP service providers can offer
residential and business users traditional and enhanced communication services via
the customer's broadband connection to the Internet.
The SPA2102 features two POTS (Plain Old Telephone Service) ports to connect
existing analog phones, fax machines, or to a PBX system. The SPA2102 includes 2
100BaseT RJ45 Ethernet interfaces (LAN-WAN) to connect to a home or office LAN, as
well as an Ethernet connection to a broadband modem or router (WAN). Each SPA2102
service line can be independently configured via software controlled by the service
provider or the end user.
With the SPA2102, users are able to protect and extend their investment in telephones,
conference speakerphones, and fax machines as well as control their migration to IP
with an extremeley affordable, reliable solution.
Installed by the end user and remotely provisioned, configured and maintained by the
service provider, each SPA2102 converts voice traffic into data packets for transmission
over an IP network. Compact in design, the SPA2102 can be used in consumer and
business VoIP service offerings including a full-featured IP Centrex environment. The
SPA2102 uses international standards for voice and data networking for reliable voice
and fax operation.
Linksys
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
E-mail: [email protected]
[e-mail]
Web:http://www.linksys.com
Linksys products are available in more than
50 countries, supported by 12 Linksys
Regional Offices throughout the world. For
a complete list of local Linksys Sales and
Technical Support contacts, visit our
Worldwide Web Site at www.linksys.com.
Specifications are subject to change
without notice. Linksys is a registered
trademark or trademark of Cisco Systems,
Inc. and/or its affiliates in the U.S. and
certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
Other brands and product names are
trademarks or registered trademarks of
their respective holders.
PRODUCT DATA
SPA2102
Model No.
SPA2102-DS- 60613A DF
SPA Model Service
Lines
Active
Calls
3-Way
Conferences
PSTN (FXO)
Connection
SPA1001 2 2 1 0
SPA2002 2 4 2 0
SPA2100/2102 2 4 2 0
SPA3100/3102 2 3 1 1
SPA3000 2 3 1 1
Linksys Phone Adapter Comparison Chart