Linksys WMP11 ver. 2.7 Original operating instructions

D. The Setup Wizard will ask you to choose a wireless mode. Click the Infrastructure
Mode radio button if you want your wireless computers to network with computers on
your wired network using a wireless access point. Click the Ad-Hoc Mode radio button
if you want multiple wireless computers to network directly with each other. Do not use
the Ad-Hoc mode if you want your wireless computers to communicate with computers
on your wired network.
In the SSID field, enter the SSID of your wireless network. The SSID must be identical
for all devices in the network. The default setting is linksys (all lowercase). Click the
Next button.
A. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 5-1 should appear. If it does
not, click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (where “D” is the letter of your CD-ROM drive).
B. To install the Adapter,
click the Install button
on the Welcome screen.
C. After reading the
License Agreement,
click the Next button.
This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation,
configuration, and further setup options, please consult the User Guide.
Continued on back
B
C
Driver Installation and Configuration
for Windows 98SE, Me, and 2000
D
Instant Wireless®Series
Wireless-B PCI Adapter
Package Contents
• Wireless-B PCI Adapter
• External Antenna
• Setup Wizard CD-ROM with User
Guide
• Quick Installation and Registration
Card
WMP11

G. After the files have
been successfully
copied, the following
screen will appear.
Click the Exit button.
Windows 98SE, Me, and 2000 users: The driver installation
and configuration for Wireless-B PCI Adapter is complete.
Proceed to Step 2.
A. Remove any CDs or disks from their drives, and turn off your desktop PC.
B. Open your PC’s case, and locate an available PCI slot on the motherboard.
Check with your computer manufacturer for instructions.
C. Slide the Adapter into the
PCI slot. Make sure that all of
its pins are touching the slot’s
contacts. You may have to
apply a bit of pressure to
slide the Adapter all the way
in.
WWW.LINKSYS.COM
WMP11_v4-QI_98-30602A KL
Installing the PCI Adapter
E. If you chose
Infrastructure
Mode, go to Step 5
now. If you chose
Ad-Hoc Mode,
select the correct
operating channel for
your network. The
channel you choose
should match the
channel set on the
other devices in your
wireless network.
Click the Next button.
F. The following screen
will ask you to review
your settings before it
starts to copy files.
Click the Ye s button to
save these settings, or
click the No button to
change any settings.
E
D. After the Adapter is set firmly in place, secure its fastening tab to your
PC’s chassis with a mounting screw. Then close your PC’s case.
E. Attach the external antenna to the
Adapter’s antenna port.
F. Power on your desktop PC.
Windows 98SE, Me, and 2000 users:
The installation of the Wireless-B PCI Adapter is complete.
F
G
For additional information or troubleshooting help, refer to the User Guide
on the Setup CD-ROM. You can also call or email for further support.
24-hour Technical Support 800-326-7114 (toll-free from US or Canada)
E-mail Support [email protected]
Website http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise http://www.linksys.com/support
Authorization)
FTP Site ftp://ftp.linksys.com
Sales Information 800-546-5797 (800-LINKSYS)
C
E