Linksys Linksys SPA2101 User manual


Regency5000‐LinksysSPA2101PhoneAdapterConfigurationGuide.DocxV1.00.0001
1
LinksysSPA2101PhoneAdapter
ConfigurationGuide












Regency5000‐LinksysSPA2101PhoneAdapterConfigurationGuide.DocxV1.00.0001
2
Configuration

1. Ensurefirmwareisatleast5.1.10.
2. ConnectyourPCtotheLinksysSPA2102ontheEthernetport.

3. SetyourPCtogetanIPaddressfromtheDHCPserver(IfDHCPisturnedoffontheLinksys,
use192.168.0.5andsubnet255.255.255.0)
4. OpentheInternetExplorerandtypehttp://192.168.0.1andEnter.
5. NowyoucanseetheLinksysconfiguration.
6. ClickAdminLoginandselectAdvanced.
7. OntheRoutersetupselectWANsetupandselecttheconnectiontype.(IfDHCPisnot
availabletypetheIPaddressmanually)typetheDNSaddressPri‐83.137.182.72andSec‐
83.137.182.73andclicksubmitallchanges.
8. OntheVoicesetupselectLine1andchangethefollowingsettings
8.1. UnderNetworkSettings
NetworkJitterLevel:veryhigh
JitterBufferAdjustment:disable
8.2. UnderProxyandRegistration
Proxy:as.vanillaip.com
OutboundProxy:83.137.182.120
UseOutboundProxy:yes
Register:yes
RegisterExpires:60
8.3. UnderSubscriberInformation
DisplayName:LinePortwithoutdomainname
UserID:LinePortwithoutdomainname
Password:typeuserpassword
UseAuthID:yes


Regency5000‐LinksysSPA2101PhoneAdapterConfigurationGuide.DocxV1.00.0001
3
AuthID:typeuserdetails
8.4. UnderSupplementaryServiceSubscription
CallWaitingServ:no
ThreeWayConfServ:no
8.5. UnderAudioConfiguration
PreferredCodec:G711u
UsePrefCodecOnly:yes
SilenceSuppEnable:no
EchoCancEnable:no
Change“faxenable=T38”toNo
9. ClickSubmitAllChangestosaveall.
