Linksys RE6350 User manual

TROUBLE SHOOTING STEPS GUIDE
HARDWARE INFORMATION
1. What is the Linksys RE6350 AC1200 Wi-Fi Range Extender?
The Linksys RE6350 AC1200 Wi-Fi Range Extender is a dual-band wireless range extender that
helps boost your router’s Wi-Fi® range up to 7500 sq. ft. for better coverage and signal strength. To
know more, click here.
2. What is included in the Linksys RE6350 package?
The following items are included in the Linksys RE6350 package:
One Linksys RE6350
Quick Start Guide
Regulatory Information Booklet
3. What are the parts of the Linksys RE6350?
The Linksys RE6350 has the following parts:
Wi-Fi Protected Setup™ (WPS) button
Power / WPS light indicator
Reset button
4. What does the Power / WPS light on the Linksys RE6350 indicate?
Power Light
Status / Description
Blinking Green
Starting up
Resetting to factory defaults
Upgrading firmware
Solid Green
Ready to use
Solid Orange
Weak connection with the router
Fix: Unplug the range extender, and move it closer to the router.
Blinking
Orange
Not connected to the router or other error
oMake sure your router has an internet connection
and Wi-Fi is turned ON.
oIf the router is in order, unplug the range
extender, move it closer to the router. Then, plug
it back in. Wait for one minute and reconnect to
your network.
WPS paring failed
5. What is the warranty period of the Linksys RE6350?

TROUBLE SHOOTING STEPS GUIDE
The warranty period is dependent on the country of purchase. For more information about your
device’s warranty, click here.
6. What are the product requirements of my Linksys RE6350?
The product requirements are:
Existing 802.11 a/b/g/n/ac wireless router or access point
A Windows®, Mac® computer, or tablet with Wi-Fi capability
AC power outlet
Browsers:
oInternet Explorer® 8 or higher
oSafari® 5.1 for Mac® or higher
oGoogle Chrome™ 25.0 or higher
oFirefox® 20 or higher
7. What are the product features of my Linksys RE6350?
Below are the product feaures of the Linksys RE6350:
802.11ac
Concurrent Dual-Band
N300 + AC867 Mbps Speeds
Cross-Band Technology
Beamforming Technology
Compact Design
Easy Setup with Spot Finder
2 x 2 Spatial Streams
Eliminate dead zones and boost coverage
Wireless Security (WEP, WPA™, WPA2™, and WPA2™ / WPA™ Mixed Mode)
SETUP & INSTALLATION
1. How do I set up the Linksys RE6350?
Setting up the Linksys RE6350 is made fast and easy because of its CD-less setup. Now you can
run the setup from a web browser even if your device does not initially have an internet connection
and is on factory settings. Click here to learn how to set up the Linksys RE6350 using the browser
based setup.
2. Can I set up the Linksys RE6350 using a tablet?
Yes.
3. What is the default IP address and password used by the Linksys RE6350?
If the Linksys RE6350 does not detect a Dynamic Host Configuration Protocol (DHCP) server in your
network and has not obtained an IP address from a router, its default IP address is 192.168.1.1 and
password is admin.

TROUBLE SHOOTING STEPS GUIDE
4. How do I set up my Linksys RE6350 using the Wi-Fi Protected Setup™ (WPS)?
To learn on how you can set up the range extender using WPS, click here.
5. Do I need to install Setup Software on my computer?
No.
6. How do I reset my Linksys RE6350?
To reset the Linksys RE6350 to its factory defaults, press and hold the Reset button for 10
seconds.
FIRMWARE UPGRADE
1. How do I upgrade the firmware of the Linksys RE6350?
You can upgrade the firmware of the Linksys RE6350 using its Auto update feature or Manual
update. For detailed instructions on how to do these, click here.
WIRELESS CONNECTION & SECURITY
1. What wireless security modes does the Linksys RE6350 support?
The Linksys RE6350 supports WEP, WPA™, WPA2™, and WPA2 / WPA Mixed Mode security
types.
2. Which wireless connection standards and frequencies are supported by the
Linksys RE6350?
The Linksys RE6350 supports 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac standards. It
also supports the 2.4 GHz and 5 GHz frequencies simultaneously.
3. What is the maximum PHY Data Rate for each band?
The maximum wireless speed for the 2.4 GHz band is 300 Mbps and the maximum wireless speed
for the 5 GHz band is 867 Mbps.
4. What is the default Wi-Fi name of my Linksys RE6350?
The default Wi-Fi name of your Linksys RE6350 is Linksys Extender Setup.
5. Does the Linksys RE6350 support simultaneous dual-band (2.4 GHz and 5 GHz)?
Yes.
6. What is Cross-Band technology and does my Linksys RE6350 support it?
Yes. The Linksys RE6350 supports Cross-Band technology. This technology maximizes
simultaneous use of both bands (2.4 GHz and 5 GHz) for high speed data transfer and uninterrupted
streaming and gaming.
7. Where can I find the MAC address of my range extender for Wireless MAC Filtering?

TROUBLE SHOOTING STEPS GUIDE
You can find the wireless MAC address of your range extender in its web-based setup page. Go
to Status > WLAN Statistics > Extender MAC address and look for Seen by Upstream AP. For
detailed instructions, click here.
8. Can I change the Extended Wireless Settings of my range extender?
Yes. To learn how to change the Extended Wireless Settings, click here.
9. How can I check if the Linksys RE6350 is connected to my existing wireless network?
To check if the Linksys RE6350 is connected to your network, access the range extender’s web-
based setup page. Under Wireless, click Basic Settings >Status.
10. I have multiple wireless routers or access points in my network, how can I tell which
access point / wireless router my range extender is connected to?
To know which access point or wireless router your Linksys RE6350 is connected to, access the
range extender’s web-based setup page. Under Status, click WLAN Statistics then check the AP
MAC address section. Take note of this as it is the MAC address of the access point or wireless
router your Linksys RE6350 is connected to.
11. Can I connect multiple wireless devices to my Linksys RE6350?
Yes. The Linksys RE6350 acts as an extension of your router or access point so you can connect
multiple devices to it.
TROUBLESHOOTING
1. What should I do if I cannot connect the range extender to the router or access point?
Here are some things you can do:
Make sure you are using the same Wi-Fi name and Wi-Fi password as your existing wireless
router or access point.
For first-time setup, you may need to place the range extender closer to the router. After
you’ve set up your range extender, you can unplug it and move it to the final location.
To reduce signal obstructions, try alternate locations for the router and range extender.
Avoid placing the router and range extender near metal objects, masonry walls, and
reflective surfaces such as glass or mirrors.
Avoid placing the router and range extender near other electronics that may cause signal
interference.
If you’re using WPS to connect, wait until the WPS indicator stops blinking before trying to
make the connection again.
2. What should I do if I cannot access the Linksys RE6350 web-based setup page?
If you cannot access the Linksys RE6350, try any of the following troubleshooting methods:
Make sure you are connected to the extended Wi-Fi name of your range extender
Powercycle the range extender.

TROUBLE SHOOTING STEPS GUIDE
Move the range extender closer to your router.
Look up the range extender’s IP address on your router’s DHCP Client Table and try to ping
it.
Reset extender and go through the setup again.
For more detailed information, click here.
3. What should I do if I experience intermittent connection issues when connected to the
Linksys RE6350?
Make sure that your range extender is getting at least 50 percent of your router’s Wi-Fi signal and is
located midway between your router and the area without Wi-Fi. To check your range extender’s
wireless signal, access its web-based setup page and click Status > WLAN Statistics > Signal
Strength.For instructions on how to check and verify your computer’s wireless connection,
click here.