Linksys WVC54G - Wireless-G Internet Video Camera... Original operating instructions

A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WVC54G
Internet Video Camera
Wireless-G
1
2
AAttach the antenna.
BConnect the included Ethernet
network cable to your router,
switch, or computer.
CConnect the other end of the
cable to the Ethernet port on
the Camera.
DConnect the included power
adapter to the Power port on
the Camera.
EPlug the power adapter into
an electrical outlet.
The Ready LED flashes while
the Camera is initializing. When
the Camera is ready for setup,
the Ready and Ethernet LEDs
are solidly lit.
FEnter a unique name for the
Camera in the Camera Name
field, and complete the
Description field. Select your
time zone, and enter the date
and time. Then click Next.
GIf your network has a router or
other DHCP server, select
Automatic Configuration-
DHCP. If the Camera requires a
static IP address, keep the
default setting, Static IP
address.
Click Next.
HIf you selected Automatic
Configuration-DHCP in step G,
then proceed to step I.
If you selected Static IP
address, the IP Settings screen
will appear. Enter an IP
Address, Subnet Mask, and
Default Gateway appropriate
for your network. You must
specify an IP Address and
Subnet Mask. If you are unsure
about the Default Gateway,
then leave this field blank.
Complete the Primary DNS
and/or Secondary DNS fields.
Enter at least one DNS address,
which you can obtain from
your ISP. Click Next.
A
H
CG
AInsert the Setup CD-ROM into
your CD-ROM drive. The Setup
Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click
Start and then Run. In the field
provided, enter D:\wvc54g.exe
(if “D” is the letter of your CD-
ROM drive).
BClick Setup to begin the setup
process.
CMake sure the Camera is
properly connected to your
network. Click Next.
DThe screen will display a list of
Wireless-G Internet Video
Cameras on your network and
status information. In the
Selection box, click the name
of the Camera you are
currently installing. Click Next.
EA verify password screen will
appear. In lowercase letters,
enter admin in the
Administrator Name and
Password fields. Click OK.
NOTE: The default IP address of the
Camera is 192.168.1.115.
NOTE: If you want to connect the
Camera to a wireless network for
setup, refer to the User Guide on the
Setup CD-ROM for instructions.
IMPORTANT: You MUST connect the
Camera to a router, switch, or PC using
an Ethernet network cable BEFORE
powering on the Camera. Otherwise, the
Camera will not function.
D
C
D
E
GHz
2.4
802.11g
Connect the Camera to a Wired
Network for Setup Set up the Video Camera
Package Contents
• Wireless-G Internet Video Camera
• Camera Desktop Stand
• Detachable Antenna
• Power Adapter
• Ethernet Network Cable
• Setup CD-ROM with User Guide
•UserGuideonCD
• Quick Installation Guides
• SoloLink DDNS Free Trial Card
• Registration Card
F

J
LReview your settings before the
Setup Wizard starts to copy
your files.Click Next.
MClick the OK button to confirm
that you want to save the new
settings.
NAfter the files have been
successfully copied, the
Congratulations screen will
appear.
Click the Install Viewer &
Recorder Utility button to install
the Camera’s Utility on your PC.
This Utility provides a
convenient way to view and
record the Camera’s video.
N
IClick the Infrastructure radio
button if you want the Camera
to communicate using an
access point or wireless router.
Click the Ad-Hoc radio button
if you want the Camera to
communicate without using an
access point or wireless router.
Click Next.
JEnter your wireless network’s
SSID or network name. If you
chose Ad-Hoc mode, select
the channel at which the
network broadcasts its wireless
signal. Then click Next.
KThe Security Settings screen will
appear. If your network has
WEP encryption enabled, then
select the level of WEP
encryption and enter a
Passphrase. If you do not have
a Passphrase and want to
manually enter a WEP key,
leave the Passphrase field
blank and complete the Key 1
field.
If your network has WEP
encryption disabled, keep the
default, Disabled.
Then click Next.
4
AUnplug the power adapter
from the electrical outlet.
BUnplug the Ethernet network
cable from the Camera as well
as the PC, router, or switch.
CPlace the Camera in the
location you want.
DPlug the power adapter into a
local electrical outlet.
The Ready LED flashes while
the Camera is initializing. When
the Ready and Wireless LEDs
are solidly lit, the Camera is
ready for use.
EAim and focus the Camera
accordingly.
Congratulations! The installation of
the Wireless-G Internet Video
Camera is complete.
To view the Camera’s video, open
your web browser, and enter the
Camera’s IP address. (Use Internet
Explorer version 5.5 or higher.
Netscape users should use the
Viewer & Recorder Utility.)
AAfter you clicked the Install
Viewer & Recorder Utility
button, the Welcome screen
will appear. Click Next.
BTo install the Utility files in the
default folder, click Next. To
select a different folder, click
Browse and follow the on-
screen directions.
CTo add program icons to the
default folder, click Next. To
add program icons to an
existing folder, select one from
the Existing Folders listed, and
then click Next.
DWhen the ActiveX plug-in has
been installed, you will see the
screen shown in Figure D. Then
click OK.
EWhen the setup is complete,
click OK.
FTo open the Utility, double-click
its shortcut on your desktop.
WVC54G-QI-40420A JL
M
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
[email protected]
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark
and SoloLink is a trademark of Cisco Systems,
Inc. and/or its affiliates in the U.S. and certain
othercountries.Copyright©2004CiscoSystems,
Inc. All rights reserved.
Model No.
3
K
L
NOTE: OntheCongratulations screenof
the Setup Wizard, you can click the
Setup SoloLink DDNS Service button
to take advantage of the Camera’s
Dynamic Domain Name System (DDNS)
feature.Thisis usefulfor remoteaccess
of the Camera via the Internet. Refer to
the SoloLink™Quick Installation for
more information.
F
Install the Viewer & Recorder Utility
Connect the Video Camera for
Wireless Network Use
IA
B
D
C
E
NOTE: To use the Viewer & Recorder
Utility, double-click its icon. Click Find
to search for the Camera. Click Add to
add the Camera to the Utility’s list.
Then click View.