Linksys NSLU2 - Network Storage Link NAS Server User manual

Model No.
Product Data
WIRED
NSLU2
Easily Add Storage Space to Your Network
Connects USB 1.1 or
2.0 disk drives and
flash disks directly to
your network
Built-in disk utilities —
format, backup, and
scandisk
Share music, video,
or data files with
managed access by
user name or group
Integrated file server
— access your files
from the Internet
files can be easily downloaded via your web
browser. Your files can be available publicly, or
create password-protected accounts for
authorized users.
Installation of the Network Storage Link is simple
— just plug it directly into your 10/100 Ethernet
network, and attach your USB 2.0 hard drives or
flash disk. It can self-configure to your network
via DHCP or you can use the built-in utility to
manually configure it. With the speedy USB 2.0
interface, you'll get quick response times with
even your largest files.
The Network Storage Link features built-in disk
utilities, accessible through your web browser.
You can format new disk drives, and scan drives
for errors. The built-in backup program lets you
schedule full, incremental, or synchronization
backups of your network drives to the Network
Storage Link, or vice versa. It will even send you
an email message when a hard drive gets
nearly full, completely full, or has an error.
The Network Storage Link is a fast, simple, flexi-
ble and economical way to add storage to
your network.
Network Storage Link
for USB 2.0
Now you can quickly and easily add gigabytes of
storage space onto your network with the Network
Storage Link from Linksys. This tiny network appliance
connects USB 2.0 hard drives directly to your Ethernet
network. You can connect up to two stand-alone
USB disk drives of any size, and access them from
anywhere on your network. You can even plug a USB
flash disk into the Network Storage Link, for a conve-
nient way of accessing your portable data files. The
Network Storage Link can also be set up so that your
storage devices are accessible from the Internet —
Disk Drives

Product Data
Model No.
Features
• Quickly add your USB 2.0 stor-
age devices to your network
• Built-in 10/100 Fast Ethernet
port for throughput up to
200Mbps
• Simple Web-based user inter-
face for fast configuration
from anywhere on the net-
work
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA 92612 USA
E-mail: [email protected]
[email protected]
Web: http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional Offices
throughout the world. For a complete list of local
Linksys Sales and Technical Support contacts, visit
our Worldwide Web Site at www.linksys.com.
NSLU2
for USB 2.0 Disk Drives
Network Storage Link
Specifications
Model NSLU2
Standards USB 1.0/1.1/2.0, IEEE 802.3, IEEE 802.3u
Ports 1 10/100 RJ-45 Ethernet port, 2 USB 2.0 ports
Buttons Power, Reset
Cabling Type Category 5 Ethernet Cable
LEDs Status, Ethernet, USB1,USB2
UPnP able/cert Yes
Environmental
Dimensions 130 mm x 21 mm x 91 mm
(5.12" x 0.81" x 3.56")
Unit Weight 5.50 oz. (0.156 kg)
Power Input External, 5VDC/2A
Certifications FCC, CE
Operating Temp. 41ºF to 104ºF (5ºC to 40ºC)
Storage Temp. 14ºF to 140ºF (-10ºC to 60ºC)
Operating Humidity 10% to 80%, Non-Condensing
Storage Humidity 5% to 90%, Non-Condensing
NSLU2-DS-40512NC-BW
Package Contents
• One NSLU2 - Network Storage Link for USB
2.0 Disk Drives
• One Power Adapter
•One 6 ft Ethernet Cable
• One Setup Wizard CD with User Guide in PDF
format
• One Registration Card
• One Device Stand
Minimum Requirements
•USB 1.0/1.1/2.0 Flash Memory Disk
• USB 1.0/1.1/2.0 External Disk Drive
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.