Linon 6252SF-AB-KD-U User manual

PAGE 1 - MODEL # 6252SF-AB-KD-U
ASSEMBLY INSTRUCTIONS
BUFFET 2 DOORS + 2 DRAWERS
MODEL # 6252-SF-AB-KD-U
05/03
WE ARE HERE TO HELP!
LINON HOME DECOR PRODUCTS, INC.
PLEASE READ ALL INSTRUCTIONS IN THIS BOOKLET BEFORE STARTING ASSEMBLY.
IMPORTANT:
TOLL FREE NUMBER 1.800.262.1852
MADE IN BRAZIL
FOR LINON HOME DECOR PRODUCTS, INC.
TEL: [phone]
FAX: [phone]
e-mail: [email protected]
WE TRY TO INSURE THAT YOUR FURNITURE ARRIVES IN EXCELLENT CONDITIONS.OUR
SERVICE REPRESENTATIVES ARE READY TO HELP YOU WITH QUICK SERVICE.PLEASE
CALL IF A PART IS DAMAGED OR MISSING. PLEASE CALL PRIOR TO RETURNING THE
ITEM TO THE STORE. OUR OFFICE IS OPEM 9 AM TO 5 PM EASTERN STANDARD TIME.
BY RS3/114

PAGE 2
59
WOOD DOWEL 1 3/16" LONG
SCREW 1 5/8" LONG
SCREW 1 5/8" LONG
SCREW 1 3/16" LONG
SCREW 5/8" LONG
"L" METAL BRACKET
DOOR CATCH
DOOR STOP
HINGE
METAL KNOB
SCREWS 3/4" LONG
WASHER 9/16"
NAIL
13
32
16
32
02
01
02
04
04
04
04
20
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER.
COUNT EACH PIECE OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE
HARDWARE LIST COLUMN. CALL CUSTOMER SERVICE IF ANY PARTS ARE MISSING.
FOLLOW THE LETTER IDENTIFICATION WHEN READING THE ASSEMBLY DRAWING
“A” THROUGH “M”.
A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), A STANDARD SPANNER
KEY (NOT PROVIDED) AND A HAMMER (NOT PROVIDED) ARE REQUIRED TO ASSEMBLE
THIS UNIT.
HARDWARE PACKAGE COUNT.
HARDWARE IDENTIFICATION
TOOLS REQUIRED
A
B
C
D
E
G
H
I
J
K
L
M
F
IMPORTANT:
PLEASE USE ALL THE HARDWARE MENTIONED ABOVE.
THEY WILL ASSURE THE ITEM STABILITY AND SAFETY.

PARTS IDENTIFICATION
1. RIGHT SIDE PANEL
2. LEFT SIDE PANEL
3. RIGHT FRONT RAIL
4. LEFT FRONT RAIL
5. UPPER RAIL
6. CENTRAL RAIL
7. UPPPER DIVISION
8. LOWER RAIL
9. LOWER DIVISION
10. BASE PANEL
11. ADJUSTABLE SHELF
12. MIDDLE SLIDING GUIDE
13. SIDE SLIDING GUIDE (2x)
14. BACK RAIL
15. DOOR (2X)
16. SIDE SKIRT (2X)
17. FRONT SKIRT
18. TOP PANEL
19. DRAWER FRONT PANEL (2X)
20. DRAWER SIDE PANEL (4X)
21. DRAWER BACK PANEL (2X)
22. DRAWER BOTTOM PANEL(2X)
23. BACK PANEL (2X)
PAGE 3
21
23
20
22
10
11
13
15
15
17
16
18
19
20
14
1
23
4
5
8
9
6
7
12

PAGE 4
STEP 1)
STEP 2)
FIGURE 1
FIGURE 2
1.1 INSERT (12) WOODEN DOWELS (A) TO RIGHT SIDE PANEL #1, LEFT SIDE PANEL #2 AND BASE PANEL #10 USING
THE PRE-DRILLED HOLES AS A GUIDE, AS SHOWN ON FIGURE 1.
1.2 FIX (2) “L” METAL BRACKETS (G) TO RIGHT SIDE PANEL #1 AND LEFT SIDE PANEL #2 USING (2) SCREWS (E), A
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 1.
2.1 INSERT (39) WOODEN DOWELS (A) TO UPPER RAIL #5, CENTRAL RAIL #6, LOWER RAIL #8, BACK RAIL #14, FRONT
SKIRT #17, LOWER DIVISION #9, UPPER DIVISION #7, MIDDLE SLIDING GUIDE #12, SIDE SLIDING GUIDE #13 (2x) AND
SIDE SKIRT #16 (2x), USING THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 2.
2.2 FIX (1) DOOR CATCH (H) ON CENTRAL RAIL #6 USING (3) SCREWS (B), A PHILLIPS HEAD SCREWDRIVER (NOT
PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 2.
2
1
A
AA
A
A
A
A
A
A
A
A
A
10
E
G
E
G
5
6
8
14
12
7
16 x2 17
9
B
B
H
A
A
A
A
A
AA
A
A
A
A
A
A
A
A
A
A
A
B
13
A
A
A
X2

PAGE 5
STEP 3)
STEP 4)
FIGURE 3
FIGURE 4
3.1 FIX (4) HINGES (J) TO DOOR #15 (2x) USING (12) SCREWS (E), A PHILLIPS HEAD SCREWDRIVER ( NOT PROVIDED)
AND THE PRE-DRILLED HOLES AS A GUIDE, AS SHOWN ON FIGURE 3 AND DETAIL.
3.2 FIX (2) KNOBS (K) TO DOOR #15 (2x) USING (2) WASHERS (M), (2) SCREWS (L), A SPANNER KEY (NOT PROVIDED)
AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 3.
NOTE: FIRSTLY, POSITION THE WASHER (M)
AND THEN THE SCREW (L),USE A SPANNER
KEY (NOT PROVIDED) TO SCREW
CORRECTLY THESE PARTS.
4.1 FIX (2) DOOR STOPS (I) TO DOOR #15 (2x) USING (4) SCREWS (E), A PHILLIPS HEAD SCREWDRIVER (NOT
PROVIDED) AND THE PRE-DRILLED HOLES AS A GUIDE, AS SHOWN ON FIGURE 4.
NOTE: CHECK THE RIGHT POSITION TO FIX THE DOOR STOPS (I), THE POSITION OF ONE DOOR IS DIFFERENT
FROM THE OTHER DOOR. FOLLOW FIGURE 4.
15 x2
E
L
E
J
J
J
M
K
15 15
I
I
E
E

PAGE 6
STEP 5)
STEP 6)
FIGURE 5
FIGURE 6
5.1 JOIN CENTRAL RAIL #6, UPPER DIVISION #7, LOWER DIVISION #9, UPPER RAIL #5 AND LOWER RAIL #8,
USING THE PRE-INSERTED WOODEN DOWELS AND THE PRE-DRILLED HOLES AS A GUIDE, AS SHOWN ON FIGURE 5.
5.2 NOW, ATTACH RIGHT FRONT RAIL #3 AND LEFT FRONT RAIL #4 TO JOINED PIECES #5, #6, #7, #8 AND #9, USING
THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 5.
5.3 FIX THE PIECES ALREADY JOINED BY WOODEN DOWELS, USING (10) SCREWS (C), A PHILLIPS HEAD
SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 5.
6.1 FIX BASE PANEL #10 TO RIGHT SIDE PANEL #1 AND LEFT SIDE PANEL #2, USING (06) SCREWS (C), A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED) THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES
AS GUIDE, AS SHOWN ON FIGURE 6.
6
5
3
4
8
9
7
C
C
C
C
C
C
C
C
C
C
1
2
10
10
C
C
C
C
C
C

STEP 7)
STEP 8)
FIGURE 7
FIGURE 8
7.1 FIX THE ASSEMBLED FRONT FRAME TO RIGHT SIDE PANEL #1, LEFT SIDE PANEL #2 AND BASE PANEL #10,
USING (03) SCREWS (B), (02) SCREWS (E), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN
DOWELS ALREADY INSERTED, THE “L” METAL BRACKETS ALREADY FIXED TO SIDE PANELS #1 AND #2 AND THE
PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 7.
8.1FIX SIDE SKIRT #16 (2x) TO RIGHT SIDE PANEL #1 AND LEFT SIDE PANEL #2, USING (04) SCREWS (B), A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES
AS GUIDE, AS SHOWN ON FIGURE 8.
8.2 FIX FRONT SKIRT #17, TO ASSEMBLED FRONT FRAME USING (03) SCREWS (B), A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN
ON FIGURE 8.
PAGE 7
B
E
EB
B
B
B
B
B
B
B
B
17
16
16
2
2
10
1
1

C
STEP 9
STEP 10)
FIGURE 9
FIGURE 10
PAGE 8
10.1 FIX TOP PANEL #18 TO THE PRE-ASSEMBLED UNIT, USING (09) SCREWS (C), A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN
ON DRAWING.
14
12
10
C
C
C
C
C
C
18
9.1 ATTACH BACK RAIL #14 TO BASE PANEL #10, USING THE WOODEN DOWELS ALREADY INSERTED AND THE
PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON DRAWING.
9.2 ATTACH MIDDLE SLIDING GUIDE #12 TO UPPER DIVISION #7 AND BACK RAIL #14, USING THE WOODEN DOWELS
ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE.AFTER THAT FIX IT USING (02) SCREWS (C), A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 9.
9.3 FIX BACK RAIL #14 TO BASE PANEL #10, USING (01) SCREW (C), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED)
AND THE PRE-DRILLED HOLE AS GUIDE, AS SHOWN ON FIGURE 9.
C
C
C
C
C

STEP 11)
STEP 12)
FIGURE 11
FIGURE 12
PAGE 9
12.1 FIX SIDE SLIDING GUIDE #13 TO RIGHT SIDE PANEL #1 AND LEFT SIDE PANEL #2, USING (04) SCREWS (C), A
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-
DRILLED HOLES AS GUIDE, AS SHOWN FIGURE 12.
11.1 INSERT (4) WOODEN DOWELS (A) INTO THE HOLES LOCATED AT INNER PART OF SIDE PANELS #1 AND #2.
NOTE: YOU HAVE THREE HEIGH OPTIONS TO POSITION THE ADJUSTABLE SHELF #11. PLEASE CHOOSE THE DESIRE
ONE AND INSERT THERE THE WOODEN DOWELS (A).
11.2 INSERT ADJUSTABLE SHELF #11 PLACING IT ON THE PRE-INSERTED WOODEN DOWELS.
A
A
A
11
C
C
C13
1
2

STEP 13)
STEP 14)
FIGURE 13
FIGURE 14
DETAIL 14.1
PAGE 10
14.1 FIX DOORS #15 TO THE ASSEMBLED UNIT USING (12) SCREWS (E), A PHILLIPS HEAD SCREWDRIVER (NOT
PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON DRAWING AND DETAIL 14.1.
13.1 FIX BACK PANEL #23 (2x) TO PRE-ASSEMBLED UNIT, USING (20) NAILS (F) AND A HAMMER (NOT PROVIDED),
AS SHOWN ON FIGURE 13.
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
23
23
ATTENTION: YOU MUST INSTALL ALL NAILS
SUPPLIED, IN ORDER TO ENSURE THE
STABILITY AND STRENGHT OF THE UNIT.
15
E
E
F
F
F
15 E
E

STEP 15)
STEP 16)
FIGURE 16
PAGE 11
16.1 INSERT THE ASSEMBLED DRAWERS INTO THE ASSEMBLED UNIT.
16.2 INSERT (4) WOODEN DOWELS (A) TO DRAWER SIDE PANEL #20, USING THE PRE-DRILLED HOLES AS GUIDE,
AS SHOWN ON DRAWING.
NOTE: THESE WOODEN DOWELS WILL WORK AS DRAWER STOPS.
15.1 FIX (2) KNOBS (K) TO DRAWER FRONT PANEL #19 (2x), USING (2) WASHERS (M), (2) SCREWS (L), A SPANNER KEY
(NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 15.
15.2 FIX DRAWER SIDE PANEL #20 (4x) TO DRAWER FRONT PANEL #19 (2x), USING (08) SCREWS (D), A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON FIGURE 15.
15.3 INSERT DRAWER BOTTOM PANEL #22 (2x) TO DRAWER SIDE PANEL #20 (4x), USING THE PRE-DRILLED GROOVES
AS GUIDE.
15.4 FIX DRAWER BACK PANEL #21 (2x) TO DRAWER SIDE PANEL #20 (4x) AND DRAWER BOTTOM PANEL #22, USING
(08) SCREWS (D), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED GROOVES AS GUIDE
AS SHOWN ON DRAWING.
FIGURE 15
D
D
D
D
D
20
20
20
22
21
19
19
X 2 K
19 x2
L
M
20
D
D
D
A