Furniture of America Evangeline CM3394T User manual

For more information contact our team: [email protected]

Align right and left panels (#3,4) to the holes of the side panels (#5), then secure by using
bolts (#A) with washers (#B,C).
Align base (#7) to the holes of the panels
(#3,4,5), then secure by using bolts (#A)
with washers (#B,C).

Slide glass (#6) to connect to both sided panels (#3,4).
Secure panels (#3,4,5) to the base (#7) by using bolts
(#A) with washers (#B,C).

Align table top base (#2) to the holes of the
base, then pull out the electrical connectors
through the table top base (#2). Secure
table top base (#2) to the base by using
bolts (#A) with washers (#B,C).
Align table top base to the holes of the table top
(#1), then secure by bolts (#A) with washers
(#B,C). Make sure all 4 electrical connectors are
extended outwards.

1) Align and connect the electrical connectors together
with the electrical connectors of the table top.
2) Open battery case, then insert batteries into the
designated slots. Make sure the battery case is
turned off before doing this process.
Turn the battery case on, then touch the "touch
me" sticker to light up.