Linseis Chip DSC Installation and user guide

1
How To
Crimp crucibles
for Chip DSC
Linseis Messgeräte GmbH
Gerlach
Stand: 04.04.2019

How To Crimp Crucibles for Chip DSC
2
Index
1. The sample press and crimping tool............................................................................................................................3
2. Prepare the Sample press and sample........................................................................................................................4
4. Crimp the Crucible...............................................................................................................................................................5

How To Crimp Crucibles for Chip DSC
3
1. The sample press and crimping tool

How To Crimp Crucibles for Chip DSC
4
2. Prepare the sample press and sample
-Put the upper part from the crimping tool off
-Insert the crucible (make sure the bottom of the crucible is flat)
-Insert the sample into the crucible and put on the lid on the crucible

How To Crimp Crucibles for Chip DSC
5
4. Crimp the Crucible
-Put the crucible holder back on the lower part of the crimping tool
-Pull down the rod of the crimping tool and crimp the crucible
-Use enough power on it, so that the crucible is pressed well
-Put the upper part of the crimping tool off from the sample press
-Your sample is ready now