LINSY HOME LS200E7-A User manual

Assemb ly Instructions - Please keep for future reference
Di mensions
Width - 31.5 inch
Depth -11.42 inc h
Height - 34.17 inch
Dresser with 8 Drawers
LS200E7-A
If you need help or have damaged or missing parts, email:
[email protected]
Important-Please read these instructions before assembly
1
Tools req uired b y
the consum er
1 2

Safety and Care Advice
Important –Please read these instructions fully before starting assembly
Please keep your receipt as proof of purchase. If you have any suggestions or problems,
please contact us via email:[email protected]
Check that if you have all the
components and tools listed on the
front cover and pages 3 -4.
Remove all fittings from the plastic
bags and separate them into their
groups
Keep children and animals away
from the work area, small parts
could choke if swall owed.
Make sure you have enough space
to layout the parts before sta rting .
Do not stand or put weight on the
product, this could cause damage.
Assemble the item as close to its
final position (in the same room) as
front of radiators, fires or any other
possible.
Do not place furniture directly in
source of heat.
Parts of the assembly
floor.
will be easier with 2
people.
Assemble on a soft level surface
to avoid damaging the unit or your
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this could
Dispose of all packaging carefully
and responsibly.
damage the unit. Only use hand
screwdrivers.
Only clean using a damp cloth and
mild detergent, do no use bleach or
abrasive cleaners.
Please check if there any loose screws
on the unit from time to time.
This product should not be discarded
with household waste. Take to your
local authority waste disposal centre.
Regular dusting with a dry cloth will
keep your units clean.
Clean marks with a damp cloth.
Do not allow spillages to stay on the
surface for long.
To remove stubborn stains, wipe
over with a damp cloth and washing
up liquid.
Do not use abrasive cleaners.
Do not clean with products
contaiing the following: Acetone,
(e.g nail varnish remover). Ammonia
(e.g.bleach). or Sodium hydroxide
(e.g. Caustic soda, drain and oven
cleaners).
In the event of accidental contact
with aggresive cleaners, rinse
thoroughly with water.
To remove stains and small
scratches use a car polish or light
cutting compound.
Use place mats to protect the
surface from moisture and heat.
1 2
General care and maintenance
General information
Cleaning and care of high gloss surfaces
2

Components
Please check you have all the pieces listed below
If you need help or have damaged or missing parts, email:
[email protected]
3
8
858*290*36
858*290*36
717*290*53
768*13*13
900*Φ5
768*290*15
370*280*170
365*275*2.75

Components
Please check you have all the pieces listed below
If you need help or ha ve damaged or missing parts, email:
[email protected]
M6x30 x 6 pcs
8 pcs
S4 x 1pc
4 pcs M6 x4 pcs
M6x12 x 2 pcs M4x42x 4 pcs
M4x10 x 16pcs
A
E F H
J
B C
G
2 pcs
I
1 pc
K
4
Assembly Instructions:Shelf on the left
Step 1
Assembly Instructions:Shelf on the left
Step 1
Assembly Instructions:Shelf on the left
Step 1
Assembly Instructions
Step 1
Jx 1 pc
Ax 4 pcsAx 4 pcsAx 4 pcsAx 4 pcs
M6x25x 4 pcs
D
LSpare Parts
Spare Parts x 1 pc
1 of1
1
2
4
4
Backside
Note: Side Frames face the same
direction, The holes face the backward

Assembly Instructions
Step 2
5
Backside
Jx 1 pc
x 4 pcsC
Jx 1 pc
x 2 pcsB
Backside
Step 3
Ax 4 pcsAx 4 pcsAx 4 pcsAx 2 pcs
3
B
B
B6

Assembly Instructions
Step 4
Step 5
6
x 4 pcsD
Ex 4 pcs
K x 1 pc
H x 4 pcs
Jx 1 pc
Fx 8 pcs
Gx 16 pcs
Jx 1 pc
Backside
K
5
2
1
G
G
7
8
H
H
H
H

Assembly Instructions
Step 6
Step 7
7
Ix 2 pcs
Jx 1 pc
I