LINSY HOME LH027X2 User manual

LH027X2
ASSEMBLY INSTRUCTIONS - please keep for future reference.
IMPORTANT - please read these instructions before assembly.

General care and maintenance.
Important – Please read these instructions fully before starting assembly.
Please clean with a damp cloth or mild detergent, do not use bleach or abrasive cleaners.
Do not allow the spill to stay on the surface for a long time.
Do not clean with products containing the following: acetone (e.g., nail varnish remover), ammonia
(e.g.bleach), or sodium hydroxide(e.g., caustic soda, drain, and oven cleaners).
If the product is accidentally exposed to the irritating liquid, rinse thoroughly with clean water.
Mats can be used to protect surfaces from moisture and heat.
Please check whether there are missing screws in the product regularly.
The product should not be discarded with household waste, and please take it to your local authority
waste disposal center.
Please check if all the components and tools listed
on pages 3 - 4 are received.
Please remove all fittings from the plastic bags and
separate them into homologous groups.
Please keep children and animals away from the
working areas; swallow small parts may cause
suffocation.
Please make sure you have enough space to lay
out the parts before starting.
Do not stand on the product, which could cause
damage.
Please assemble the product as close toits
final position as possible.
Do not place furniture directly in front of
radiators, fires, or any other source of heat.
The assembly will be easier with 2 people.
Please dispose of all packaging carefully and
responsibly.
Safety And Care Advice
2

Components
Please check if all the pieces listed below are received.
3
(A)*34 (B)*34 (C)*2 (D)*2
(E)*26 (F)*7 (G)*10 (H)*10
(I)*8 (J)*1
Two-in-one Screws Two-in-one Cam
(Diameter 15mm) White furniture anchors Connecting Screws
Wood Tenon
(diameter 8*30mm) Self-tapping screws
(M3*12mm) Back Plate Buckle Self-tapping screws (M3*17mm)
L-shaped shelf support Dual-function Screwdriver

Components
Please check if all the pieces listed below are received.
4
Parts list
Number Description Specifications
（MM）
Quantity Material
Top Panle 800*300*15 Melamine Faced Boards1
1
Upper-Left Panel 985*272*15 Melamine Faced Boards1
2
Upper-Right Panel 985*272*15 Melamine Faced Boards1
3
Backplane 915*777*3 Melamine Faced Boards1
4
Upper-Left Panel
Decoration Stripe 865*40*15 Melamine Faced Boards1
5
Upper-Right Panel
Decoration Stripe 865*40*15 Melamine Faced Boards1
6
Top
Decoration Stripe 798*40*25 Melamine Faced Boards1
7
Back Bottom Brace 767*64*15 Melamine Faced Boards1
8
Bottom Panel 767*272*15 Melamine Faced Boards1
9
Lower
Decoration Stripe 798*80*25 Melamine Faced Boards1
10
Adjustable Shelves 761*256*15 Melamine Faced Boards2
11
Adjustable Shelf
Decoration Stripes 716*40*15 Melamine Faced Boards2
12
Back Brace 767*64*15 Melamine Faced Boards1
13

6
7
8
4
2
3
1
9
10
11
12
11
12
13
Product explosion diagram
Please check if all the pieces listed below are received.
5

10
6
Step 2
Step 1
Assembly Instructions
(A)*10 (J)*1
(A)*6 (E)*6 (J)*1
6
Assembly Instructions
Please use the screws correctly, otherwise the product will be seriously damaged!
7
12
8
X2

Step 4
Step 3
Assembly Instructions
(A)*2 (E)*6 (J)*1
(A)*6 (C)*2 (J)*1
7
9

(A)*5 (E)*5 (J)*1
(A)*5 (E)*5 (J)*1
Step 6
Step 5
Assembly Instructions
8
3
2

Step 8
Step 7
Assembly Instructions
(E)*4 (J)*1 (B)*4
9
(J)*1 (B)*2
11
12
X2
8
9

Step 10
Step 9
Assembly Instructions
10
(J)*1 (B)*5
(J)*1 (B)*5
2
9
13
9
2
3

(J)*1 (B)*4
Step 12
Step 11
Assembly Instructions
(J)*1 (B)*6
11
9
10
2
3
6

(J)*1 (B)*2
Step 14
Step 13
Assembly Instructions
12
(D)*2 (F)*4 (J)*1
7
2
3
Y

Step 16
Step 15
Assembly Instructions
(B)*6 (J)*1
13
4
1

Step 18
Step 17
Assembly Instructions
14
(G)*10 (H)*10 (J)*1 (F)*3
(J)*1 (C)*2
123
GH
GH
GH
GH
GH
GH
W
GH
F
GH GH
GH
The Wall
Large View at V
Large View at W
V
V

(I)*8
Step 19
Assembly Instructions
15
g
h
i

Step 20
Assembly Instructions
16
11
The Wall
11
12

Step 21
Assembly Instructions
17
The installation is complete.
The Wall

Step 22
Assembly Instructions
18