LINSY HOME LS209P1-B User manual

Assembly Instructions - Please keep for future reference LS209P1-B
Dimensions
Width - 23.62inch
Depth-11.81inch
Height - 66.93inch
Storage Shelf
If you need help or have damaged or missing parts, email:
[email protected]
Important – Please read these instructions before assembly
1

MAX
11.7KGS
please contact us via email: [email protected]
scratches, use a car polish.
following chemicals: acetone,
Do not clean it with cleaner with
dust to keep it clean.
you may use the dry cloth to clean the
you want to dump it.
local authority waste disposal centre if
with household waste. Take it to thein the unit from time to time.
Please check if there is any screws loosed
Only cleaning with a damp cloth and
responsibly.
Dispose of all packaging carefully and
hand screwdrivers we provided.
damage the unit. Only use
to insert screws, as it may
to use power drill or drivers
We do not recommend
before get start.
to put the parts out on the ground
may result in choken if swallow.
while you are installing, small parts
components and tools listed on the
Safety and Care Advice
– Please read these instructions fullybefore starting assembly
Please keep your receipt as proof of purchase. If you have any suggestions or problems,
Check that if you have all the
front cover and pages 3 - 4.
Remove all ttings from the plastic
bags and separate them into their
groups.
Keep children and animals away
Make sure you have enough space
Do not stand or put weight on the
product, which could cause damage.
Assemble the item as close to its
nal position (in the same room) as
possible.
Do not place furniture directly in
front of radiators, res or any other
source of heat.
Parts of the assembly
will be easier with 2
people.
Assemble on a soft level surface
to avoid damaging the unit or your
oor.
mild detergent, do no use bleach or
abrasive cleaners.
This product should not be discarded
Clean marks with a damp cloth.
Do not allow spillages to stay on the
surface for long.
To remove stubborn stains, wipe
over with a damp cloth and washing
up liquid.
Do not use abrasive cleaners.
(e.g nail varnish remover), Ammonia
(e.g.bleach), or Sodium hydroxide
(e.g. Caustic soda, drain and oven
cleaners).
In the event of accidental contact
with aggresive cleaners, rinse
thoroughly with water.
To remove stains and small
Place mats to protect the
surface from moisture and heat.
1 2
General care and maintenance
General information
Cleaning and care of high gloss surfaces
2
Important

Please check you have all the pieces listed below
Steel
Steel
Steel
Steel
Steel
Left Top Frame
Right Top Frame
Middle Left Frame
Middle Right Frame
Left Bottom Frame
560*350*20
560*350*20
400*330*20
400*330*20
560*350*20
1
1
1
1
1
Steel
Steel
Steel
Steel
Right Bottom Frame
Left-Side Top Frame
Right-Side Top Frame
Left-Side Bottom Frame
560*350*20
865*300*20
865*300*20
855*300*20
1
1
1
1
Steel
Steel
Particle Board
Particle Board
Right-Side bottom Frame
Connecting Tube
Big Panel
Small Panel
855*300*20
560*20*20
558*258*15
399*258*15
1
2
3
3
Reference Description Specications(mm) Quantity Material
9
8
7
6
5
12
13
11
10
4
3
2
1
Components
If you need help or have damaged or missing parts, email:
[email protected]
3

Please check you have all the pieces listed below
1 of 1
Components
If you need help or have damaged or missing parts, email:
[email protected]
M6x12 x 34 pcs
A
Assembly Instructions
Step 1
S4 x 1 pc
D
2 pcs
E
Spare Parts x 1 pc
F
Spare Parts
M6x30 x 18 pcs
B
M6 x 4 pcs
C
Dx 1 pc
Don’t screw tightly before all the screws
are put into the corresponding holes
Bx 6 pcs
B
B
B
B
B
B
1
2
⑦
8
B
4

Assembly Instructions
Step 2
Step 3
Ax 2 pcs
Bx 2 pcs
Ax 12 pcs
Dx 1 pc
Dx 1 pc
DO NOT USE THE WRONG SCREWS.
The panels can only be xed by the
screws A
Don’t screw tightly before all the screws
are put into the corresponding holes
Don’t screw tightly before all the screws
are put into the corresponding holes
A
A
B
B
3
4
⑬
⑬
⑫
A
A
A
A
A
A
A
A
A
A
A
5

Assembly Instructions
Step 4
Step 5
Ax 12 pcs
Cx 4 pcs
Don’t screw tightly before all the screws
are put into the corresponding holes
Don’t screw tightly before all the screws
are put into the corresponding holes
Dx 1 pc
Bx 10 pcs
⑪
⑪
B
B
B
B
B
B
B
B
B
B
9
10
⑤
⑥
⑬
⑫
⑫
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
Dx 1 pc
C
DO NOT USE THE WRONG SCREWS.
The panels can only be xed by the
screws A
6

Assembly Instructions
Step 6
Don’t screw tightly before all the screws
are put into the corresponding holes
Ax 8 pcs
Dx 1 pc
7

Assembly Instructions
Step 7
Dx 1 pc
All screws should be tightly
screwed
8

Assembly Instructions
Step 8
E x 2 pcs