LINSY HOME LH022Y2-A User manual

LH022Y2-A / LH022Y2-B
ASSEMBLY INSTRUCTIONS - please keep for future reference.
IMPORTANT - please read these instructions before assembly.

General care and maintenance.
Important – Please read these instructions fully before starting assembly.
Please clean with a damp cloth or mild detergent, do not use bleach or abrasive cleaners.
Do not allow the spill to stay on the surface for a long time.
Do not clean with products containing the following: acetone (e.g., nail varnish remover), ammonia
(e.g.bleach), or sodium hydroxide(e.g., causticsoda, drain, and oven cleaners).
If the product isaccidentally exposed to the irritating liquid, rinse thoroughly with clean water.
Mats can be used to protect surfaces from moisture and heat.
Please check whether there are missing screws in the product regularly.
The product should not be discarded with household waste, and please take it to your local authority
waste disposal center.
Please check if all the components and tools listed
on pages 3 - 4 are received.
Please remove all fittings from the plastic bags and
separate them into homologous groups.
Please keep children and animals away from the
working areas; swallow small parts may cause
suffocation.
Please make sure you have enough space to lay
out the parts before starting.
Do not stand on the product, which could cause
damage.
Please assemble the product as close toits
final position as possible.
Do not place furniture directly in front of
radiators, fires, or any other source of heat.
The assembly will be easierwith 2people.
Please dispose of all packaging carefully and
responsibly.
Safety And Care Advice
2

Black Plastic Top Cover
M6x25 Screws x 41pcs M6x10 Screws x 15pcs Nuts x 3pcs
Middle Panels x 3pcs Short Panels x 4pcs Long Panels x 2pcs Top Brackets x 3pcs
Bottom Brackets x 3pcs X-bar Short Reinforcement x2pcs X-bar Long Reinforcement x2pcs Nails x 21pcs
Allen Key x 1pcsLarge Back Panel x 2pcs
Leveler Feet x 6pcs
Furniture Anchors x 2pcs
Spanner x 1pcs
Small Back Panel x 2pcs
Components
Please check if all the pieces listed below ar e received.
3
A
E
I
M
P Q
N O
B C D
F G H
J K L

Please check if all the pieces listed beloware received.
Assembly Instructions
4
A
J
G
C
E
M
P
B
I
D
K
F
L
H

C x 2 pcs
E x 3 pcs
I x 12 pcs
L x 2 pcs
M x 2 pcs
H x 20 pcs
N
I
Stand the brackets sideways on the ground.
Install the long panels by locking screws
according to hole position.
Keep the screws in the same direction at its installation
Fasten the nails to the panels by
hammer or drill.
Step 2
Step 1
Assembly Instructions
Plea se u se the s crews correctly, otherwise the produ ct will be seriously damag ed!
5

F x 2 pcs
G x 2 pcs
J x 8 pcs
K x 2 pcs
D x 3 pcs
J x 6 pcs
N
N
Q
Q
Fasten x-bar reinforcement by screws.
In particular , the intersection of the x-bar reinforcement
should use the screws J and the nuts K.
Insert the top brackets into the bottom brackets then fasten with screws.
Assembly Instructions
Step 4
Step 3
6
1
2

P x 6 pcs
C x 3 pcs
B x 4 pcs
I x 28 pcs
N
Install the short panels and middle
panels in order.
Install the leveler feet.
If it is not stable,adjust the leveler feet.
High Lower
Step 5
Assembly Instructions
Step 6
7

WALL
WALL WALL WALL
Step 7
Assembly Instructions
8
O x 2 pcs
o
Install the furniture anchors by drilling holes on the wall and the
leveler feet based on needs.
1 Drill holes 2 Knock plastic parts 3 Install screws 4 Install the strap