Q2. Can I charge my device while recharging the power
station at the same time?
A: Yes but not recommended, since it will hurt LIPOWER
PA300 battery just like other rechargeable lithium
battery power devices on the market, and also make it
take much longer to full charge LIPOWER PA300;
Please note that DC ports cannot be used while PA300
is recharging.
Q5. Why is there a sound while the power station is
working?
A: This is the running sound of the built-in cooling fan.
The cooling fan can help dissipate heat to achieve a
high conversion rate. It is normal to have a slight noise
during use.
Q6. How often should the power station be charged if it is
not used for a long time?
A: To preserve the battery lifespan, we strongly recom-
mend to recharge it every 3 ~ 4 months if you don’t
use it for a long time.
Q4. Why the power station is sometimes unavailable when
the appliance is less than 300W?
A: a. The power station is running low battery. If the LCD
display shows less than 20% capacity, it needs to be
charged in time.
b. The instantaneous starting power of your equipment
is larger than the peak power of the power station, or
the nominal power of the equipment is larger than the
actual power of the power station. It is recommended
to choose our larger capacity power station.
Q3. Is the battery inside replaceable?
A: No, it is not replaceable.
Q1. Can I take my PA300 on a plane?
Battery Level Display: There are 5 segments of the
battery, approximating 20%-40%-60%-80%-100%
capacity. If the LCD display shows less than 20%
capacity, just plug it into a power source, like AC
outlet or a solar panel as soon as possible.
A: No, you can't. According to international air trans
port standards, lithium ion (rechargeable) batteries are
limited to a rating of 100 watt hours (Wh) per battery
when you take an aircraft.
5 ~ 7 Hours
AC Wall Charger Car Charger Solar Panel 100W/18V(Not Included)
7 ~ 10 Hours 5 ~ 10 Hours
Frequently Asked Questions
What it Powers
Using Your Power Station
Smartphone Drone
25+ Recharges
LED Light (5W)
50+ Hours
Mini Fridge (60W)
5+ Hours
TV 32-Inch CPAP Machine
(Using DC Converter)
4+ Hours 2-4 Nights
MacBook Pro (58Wh)
5+ Recharges10+ Recharges 8+ Recharges
1)How to charge AC appliances?
a. Long Press the button for 3 seconds to turn
on the AC output function. When the icon displays,
that means the AC output is ON, the appliance starts
to be charged.
b. After completely charging, single press the power
button to turn OFF AC output.
Support Laptop, Fan, TV, CPAP, and other
appliances less than 300W.The device will shut
down automatically, when it is short circuited or
power overloaded. Remove the device to recover.
Long press for three seconds to turn on the LED
flashlight, and short press to switch different modes.
There are four lighting modes: Steady on, Dim light,
SOS mode and Strobe mode.
Charge Me Now: Before use or storage, plug your
LIPOWER PA300 into the wall outlet until it is fully
charged.
Single press the button , the LCD display screen
displays the icon , that means the
USB/QC 3.0/TYPE-C/DC 12V output is ON. Be sure to
use 5.5mm x 2.1mm DC connector to charge DC12V
appliances.
Three Ways Of Recharging
2)How to use USB/QC 3.0/TYPE-C/DC 12V
charging ports?
3)How to use the LED flashlight?
Support DC12V devices, such as inflation pump, vacuum cleaner, electric
wrench, mini car fridge, laptop, etc.
Support smartphone, iPad, digital camera, etc.
