Lite-Puter ECP-103J User manual

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-D]
ECP-103J
DMX Dimming Controller
【USER MANUAL】
Lite-Puter Ent. Co., Ltd.
website: www.liteputer.com.tw
E-mail: [e-mail]

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
1
INDEX
Chapter 1 Introduction
1.1 Feature.......................................................................................................2
1.2 Specification .............................................................................................2
Chapter 2 Operation
2.1 Control key lock & unlock........................................................................3
2.2 Scene setting .............................................................................................3
2.2.1 Scene setting .................................................................................3
2.2.2 Scene loading................................................................................3
2.3 CHASER Edit & modify ..........................................................................4
2.3.1 CHASER loading..........................................................................4
2.3.2 CHASER Edit and modify............................................................4
2.4 CHASER SPEED and KEEP TIME setting & modify.............................5
2.4.1 feature 1. .......................................................................................5
2.4.2 feature 2. .......................................................................................5
2.5 CHASER MODE and FADE setting & modify .......................................6
2.6 TIMER Setting & modify.........................................................................9
2.6.1 TIMER Switch on / off .................................................................9
2.6.2 TIMER setting ..............................................................................9
2.6.3 TIMER modify............................................................................12
2.6.4 TIMER Delete.............................................................................12
2.6.5 System timing modify.................................................................13
2.7 CHANNEL setting..................................................................................14
2.7.1 Setting of max. control channel..................................................14
2.7.2 Switching off of control channel.................................................14
2.8 MEMORY DEFAULT ...........................................................................14

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
2
Chapter 1. Introduction
1.1 Feature
 Standard DMX 512 signal control
 Press【1…6】key to loading the chase setting ( hot key )
 Chaser function:
1. Chaser function
2. Speeding of chaser
 Color mix
 LCD display
 Control key lock / unlock function
 Timing edit and modify
 Time preset / auto execution
 Save up to 40 scenes memory
 6 set of chaser memory, up to 24 step per set
1.2 Specification
 Power supply：DC12V/1A
 Control signal：DMX512
 Control channel：60 channel
 Connector：
XLR 3pin (×1), XLR 5pin(×1), phone
jack RJ11 (×2)
 Dimension：
125(W) x 170(H) x 55(D) mm
 Weight：1.5 kg

 


☺


  


 
3
12
125
170
51
55

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
3
Chapter 2. ECP-103J Operation
IMPORTANT: PRIOR TO USE, CHARGE BATTERIES FOR 8 HOURS
2.1 CONTROLKEYlock/unlock
STEP-1
Press【FCN】+【OFF】+【◄】+【►】key to lock / unlock buttons【FCN】、【◄】、
【►】、【▲】、【▼】
2.2 SCENEsetting
2.2.1 Scene setting
STEP-1
Press【FCN】key then press【▲】or【▼】and select F1
STEP-2
Press【FCN】key to adjust the dimming value
STEP-3
Press【►】or【◄】to select the control channel, and press【▲】or【▼】to adjust
the dimming value
STEP-4 ：
Press【FCN】key to save, and press【▲】or【▼】to select the store SC:001 ~
SC:040，and press【1】to save, press【2】to skip
2.2.2 Scene Loading
STEP-1
Press【FCN】key and press【▲】or【▼】to select F8
→F1：MODIFY CH
F2：EDIT CHASER
CH 01 ------ > 0%
RECORD TO SC:001
1: YES, 2: NO
→F8: LOAD SC
F9: CHASER MODE

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
4
STEP-2
Press【FCN】key for scene loading
STEP-3
Press【▲】or【▼】to select SC:001~SC:040 ,and press【FCN】for scene loading
2.3 CHASEREdit&Modify
2.3.1 CHASER Loading
Press【1】~【6】for chaser loading
2.3.2 CHASER Edit & Modify
STEP-1
Press【FCN】key and press【▲】or【▼】to select F2
STEP-2
Press【FCN】key for chaser modify
STEP-3
Press【▲】or【▼】to select CHASER01~CHASER06, and press【1】to edit or press
【2】to skip.
STEP-4
Select【►】or【◄】STEP01~24, and【▲】or【▼】SC01~SC40，press【FCN】to
save and quit
Warning ! after save, the scene of chaser will be delete, be sure before you
modify.
LOAD SC: 001
F1：MODIFY CH
→F2：EDIT CHASER
EDIT CHASER: 001
1.NEXT, 2.QUIT
STEP 01=SC 001
Press ’Fnc’ quit

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
5
2.4 CHASER SPEED and KEEPTIME setting&modify
2.4.1 Feature 1
STEP-1
Press【1】~【6】to select the CHASER
STEP-2
Press【FCN】key and press【▲】or【▼】to select F7
STEP-3
Press【FCN】key for CHASER SPEED and KEEP TIME modify
STEP-4
Press【▲】or【▼】for CHASER SPEED modify 0.1 Sec. ~99 Min.；Press【◄】or
【►】for KEEP TIME modify 0.1 Sec. ~10 Sec.，and press【FCN】key to save
※ Regarding to CHASE SPEED & KEEP TIME ，please refer to figures of page 7。
2.4.2 Feature 2
STEP-1
Press【1】~【6】to select CHASER。
STEP-2
Press【▲】or【▼】for CHASER SPEED modify 0.1 Sec. ~99 Min.；Press【◄】or
【►】for KEEP TIME modify 0.1 Sec. ~10 Sec.，and press【FCN】key to save
※ Regarding to CHASE SPEED & KEEP TIME ，please refer to figures of page 7。
→F7:CHASER SPEED
F8: LOAD SC
CHASE SPEED=0.1S
KEEP TIME=0.1S ◄►
CHASE SPEED=0.1S
KEEP TIME=0.1S ◄►

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
6
2.5 CHASERMODEandFADESetting&Modify
STEP-1
Press【1】~【6】to CHASER.
STEP-2
Press【FCN】key，and press【▲】or【▼】to select F9
STEP-3
Press【FCN】to CHASER MODE and FADE ON/OFF。
STEP-4
Press【▲】or【▼】to choose chaser mode；to press【◄】or【►】to choose
Fade on or off. press【FCN】to save
F8: LOAD SC
→F9: CHASER MODE
CHASER MODE: 01 ▲▼
FADE: ON, OFF ◄►

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
7
Re : 4 different of color mix type
3s 5s 8s 10s 13s 15s
SC 1
SC 2
MODE 2, CHASE SPEED=3S, KEEP TIME=2S
SC1=CH1=100%, SC2=CH1~CH2=100%, SC3=CH1~CH3=100%
18s
SC 3
0s
100
%
100
%
3s 5s
0s
8s 11s 13s 16s
SC 1
SC 2
MODE 1, CHASE SPEED=3S,KEEP TIME=2S
SC1=CH1=100%, SC2=CH1~CH2=100%, SC3=CH1~CH3=100%
19s 21s
SC 3

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
8
MODE 4, CHASE SPEED=3S, KEEP TIME=2S
SC1=CH1=100%, SC2=CH1~CH2=100%, SC3=CH1~CH3=100%
3s 5s 8s 10s 13s
SC 1
SC 2
18s
SC 3
0s
100
%
100
%
2s 4s 6s 8s 10s
SC 1
SC 2
MODE 3, CHASE SPEED=3S, KEEP TIME=2S(unavailable)
SC1=CH1=100%, SC2=CH1~CH2=100%, SC3=CH1~CH3=100%
SC 3
0s

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
9
2.6 TIMERsettingandmodify
2.6.1 TIMER Switch on / off
STEP-1
Press【FCN】key, and press【▲】or【▼】to select F6
STEP-2
Press【FCN】key for TIMER ON/OFF selection
STEP-3
Press【◄】or【►】to select ON or OFF, and press【FCN】key to save
!! After entering TIMER : ON, a letter “T” twinkles at the right bottom on
LCD display.
2.6.2 TIMER setting
STEP-1
Press【FCN】key, and press【▲】or【▼】to select F4
STEP-2
Press【FCN】for TIMER EDIT
→F4:EDIT TIMER
F5:MODIFY CLOCK
= = = = END = = = =
2DEL 3ADD 4EDIT
= = = = END = = = =
<-,-> REVIEW DAT
→F6:TIMER ON/OFF
F7:CHASER SPEED
TIMER: ON, OFF

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
10
STEP-3
Press【3】to add TIMER.
STEP-4
Press【▲】or【▼】to adjust hour of TIME
STEP-5
Press【►】for next setting, and press【▲】or【▼】to adjust minute of TIME
STEP-6
Press【►】for next setting: and press【▲】or【▼】to adjust mode no.
STEP-7
Press【►】for next selecting, press【▲】or【▼】to adjust chase no.
STEP-8
Press【►】for next selecting, press【▲】or【▼】to adjust SPD
STEP-9
Press【►】for next selecting of the date，then press【▲】or【▼】to choose the date
(execution mode)
TIME=00:00,MOD=1
CHS=00 , SPD=0.1S
TIME=00:00, MOD=1
CHS=00, SPD=0.1S
TIME=00:00,MOD=1
CHS=00, SPD=0.1S
TIME=00:00, MOD=1
CHS=00, SPD=0.1S
TIME=00:00,MOD=1
CHS=00, SPD=0.1S
WDAY:EVERYDAY
KEEP TIME=0.1S

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
11
STEP-10
Press【►】for next selecting of KEEP TIME，then press【▲】or【▼】to select the
time。
Remark：4 type of execution mode
Diary execution: EVERYDAY
Weekday execution: MON.-FRI.
Weekend execution: SAT.-SUN.
Sunday execution: SUNDAY
STEP-11
Press【FCN】to save to skip.
WDAY: EVERYDAY
KEEP TIME=0.1S

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
12
2.6.3 TIMER modify
STEP-1
Press【FCN】key and press【▲】or【▼】to adjust to select F4
STEP-2
Press【FCN】for TIMER EDIT.
STEP-3
Press【◄】or【►】to select the TIMER, and press【4】for modify
STEP-4
Press【◄】or【►】to select, and press【▲】or【▼】to adjust（please refer to 2.6.2）
STEP-5
Press【FCN】to confirm and save the setting
2.6.4 TIMER Delete
STEP-1
Press【FCN】key and pres【▲】or【▼】to select F4
STEP-2
Press【FCN】key for TIMER EDIT.
→F4:EDIT TIMER
F5:MODIFY CLOCK
F3:MAXIMUM CH
→F4:EDIT TIMER
= = = = END = = = =
2DEL 3ADD 4EDIT
= = = = END = = = =
<-,-> REVIEW DAT

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
13
STEP-3
Press【◄】or【►】to select the TIMER，press【2】to delete
STEP-4
press【1】to confirm and save the setting, or【2】to skip
2.6.5 System timing modify
STEP-1
Press【FCN】key and press【▲】or【▼】to select F5
STEP-2
Press【FCN】key to modify
STEP-3
Press【►】or【◄】to select the one to modify . Press【▲】or【▼】for date and time
modify
STEP-4
Press【FCN】key to confirm and save
TIME=00:00
CHS=00 , SPD=0.1S
DEL THIS TIMER?
1: YES, 2: NO
F4:EDIT TIMER
→F5:MODIFY CLOCK
03’FEB , 12 , WED.
11:29:14

ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
ECP-103J [EUM-E]
14
2.7 CONTROLCHANNELsetting
2.7.1 Max. control channel setting
STEP-1
Press【FCN】key and press【▲】or【▼】to select F3
STEP-2
Press【FCN】to enter the mode of MAXIMUM CH 7
STEP-3
Press【▲】/【▼】/【◄】/【►】to modify channel.
2.7.2 Control channel switch
STEP-1
Press【OFF】to shut down
2.8 MEMORYDEFAULT
STEP-1
To Power off . Press and hold keys【▲】+【▼】+【FUN】+【OFF】together, in the
mean time, power on until you see following message :
STEP-2
Press 1 or 2 to select
Remark : suggest to initiate memory for the first time use
→F3:MAXIMUM CH
F4:EDITTIMER
MAXIMUM CH: 006
INITIATE MEMORY?
1: YES , 2: NO