LiteBee Brix III User manual

②Calibrate
★ Long press the button on the right top of
the controller(as the picture shows) until the
front LED of the drone stop flash and on.
③Unlock
★ After binding, place the drone in level, then
push the throttle up to its end. The drone is
unlocked if the motor starts to rotate.
Please keep the drone in level
B1
B1
A1
A1
B1
B1
A1
A1
6
Please keep the drone in level

Ps: Here we take mode 2 as an example. Operate the drone as the real situation.
Rotate
CCW
Rotate
CW
B1
B1
A1
A1
Roll left Roll right
Throttle up
Throttle
down
Left joystick Right joystick Left joystick Right joystick Left joystick Right joystick Left joystick Right joystick
Fly forward
Fly
backward
7
HOW TO FLY THE DRONE

To install the propeller guard
Motor
Motor Base
★ With the button battery, the motor
can be installed and replaced easily.
★ There are 4 propeller guards in total, and
they can be installed without any screw.
HOW TO INSTALL THE MOTOR
8

1 2 3 4
A1
B1
X4 X1 X1 X4 X4 X4 X2 X2 X12 X4
A1
A1
B1
B1
A1
A1
B1
B1
9
TYPE A

5 6
X4 X1 X4
A1
A1
B1
B1
A1
A1
B1
B1
10
B1
B1

1 2 3 54
A1
B1
X16 X4 X1X4 X4 X4 X4 X4 X2 X2
A1
A1
B1
B1
A1
A1
B1
B1
11
TYPE B

6 7
X4 X4X1
A1
A1
B1
B1
B1
B1
A1
A1
B1
B1
12

1 2 3 4
A1
B1
X1 X4 X4 X4 X2 X2 X24 X4 X2 X2
A1
A1
B1
B1
A1
A1
B1
B1
13
TYPE C

5 6
X4 X1 X4
A1
A1
B1
B1
A1
A1
B1
B1
14