Litter box SAUDER 427150 User manual

If you have assembly questions or need a replacement part, please contact Sauder directly at www.sauder.com or 800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
LITTER BOX CAT CUBE TOWER - WHITE
[e-mail] | 1.877.250.7729 | Mon-Fri, 9am-5pm EST

TABLE OF CONTENTS ASSEMBLY TOOLS REQUIRED
Part Identication
Hardware Identication
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
3
4
5
6-23
24-26
27-29
30
31
427150 www.litterbox.com/supportPage 2
Electric drill with 1/8" or 3/8" bit
(ONLY in indicated step)
Jacob Zuppke, Founder of Litterbox.com
REGISTER YOUR NEW
PRODUCT ONLINE
For immediate service, our
website is available 24 hours
per day, 7 days per week, to
order replacement parts,
access assembly tips,
register your product and
view Sauder products.
www.sauder.com/service
Hammer
Not actual size
THANK YOU FOR PURCHASING THE LITTER BOX CAT CUBE TOWER!
I am thrilled that Litterbox.com and Sauder furniture have partnered together
to bring you the highest-quality cat furniture. At Litterbox.com, we believe in
offering products that are thoughtfully designed and carefully curated to best
meet your needs. Litterbox.com and Sauder products are made with
environmentally responsible materials and world-class manufacturing
processes. Together, our companies are bringing pet parents a premium
line of stylish yet functional cat furniture that is built to last. We are your
destination for cat products. Enjoy!

Part IdentificATION
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identication to help identify similar parts.
Now you know
our ABCs.
A LEFT END (1)
B RIGHT END (1)
C LEFT FRAME (1)
D RIGHT FRAME (1)
E BRACE (4)
F BACK (1)
G BOTTOM (1)
H FRONT (1)
J BOTTOM SHELF (1)
K MIDDLE SHELF (1)
L TOP SHELF (1)
N CUSHION (1)
427150www.litterbox.com/support Page 3
A
J
L
N
E
G
D
K
C
H
B
F
E
E
E

Hardware IdentificATION
åScrews are shown actual size. You may receive extra hardware with your unit.
427150 www.litterbox.com/supportPage 4
CAM SCREW - 2
1HIDDEN CAM - 2
2
FURNITURE TIPPING
RESTRAINT KIT - 1
96
WOOD DOWEL - 8
3L-WRENCH - 1 4
1-9/16" PAN HEAD SCREW - 1
6
1/2" PAN HEAD SCREW - 14
5
2-3/4" FLAT HEAD SCREW - 4
8
1/2" HEX HEAD SCREW - 24
7

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam DowelCam Screws
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
1.
3. Insert the CAM SCREW or CAM DOWEL into
the HIDDEN CAM. Tighten the HIDDEN CAM.
1
2
2.
Arrow
Push a HIDDEN CAM into
the part. The arrow in
the HIDDEN CAM must
point toward the hole in
the edge of the board.
Hole
Hidden Cam
427150www.litterbox.com/support Page 5

View our assembly video at
www.litterbox.com/support
å Assemble your unit on a carpeted oor or on the empty
carton to avoid scratching your unit or the oor.
å Insert four WOOD DOWELS (3) into the ENDS (A and B).
å Turn two CAM SCREWS (1) into the ENDS (A and B).
Step 1
427150 www.litterbox.com/supportPage 6
1
3
A
B

å Insert the WOOD DOWELS in the RIGHT END (B) into the
RIGHT FRAME (D) as shown.
å Insert the WOOD DOWELS in the LEFT END (A) into the
LEFT FRAME (C).
Step 2
427150www.litterbox.com/support Page 7
A
B
C
D
The CAM SCREWS
must be here.
The single tab
must be here.
Thinking outside the
litter box.

å Fasten the ENDS (A and B) to the FRAMES (C and D). Use
four 2-3/4" FLAT HEAD SCREWS (8).
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
Step 3
427150 www.litterbox.com/supportPage 8
A
B
C
D
2-3/4" FLAT HEAD SCREW
(4 used in this step)
8

å Fasten the BRACES (E) to the RIGHT FRAME (D). Tighten
eight 1/2" HEX HEAD SCREWS (7) using the L-WRENCH (4).
å NOTE: Do not completely tighten the SCREWS in this step.
Step 4
427150www.litterbox.com/support Page 9
D
The single tab
must be here.
E
E
E
E
4
1/2" HEX HEAD SCREW
(8 used in this step)
7

å Push two HIDDEN CAMS (2) into the BACK (F).
å Fasten the BACK (F) to the RIGHT END (B). Tighten one
HIDDEN CAM.
Step 5
427150 www.litterbox.com/supportPage 10
F
B
F
2
Arrow
2
Arrow
Surface with HIDDEN CAMS
This hole
must be here.

å Fasten the BACK (F) to the RIGHT FRAME (D). Tighten four
1/2" HEX HEAD SCREWS (7) using the L-WRENCH (4).
Step 6
427150www.litterbox.com/support Page 11
D
F
4
1/2" HEX HEAD SCREW
(4 used in this step)
7

å NOTE: This step shows a different view.
å Fasten the BOTTOM (G) to the tabs on the RIGHT
FRAME (D). Use two 1/2" PAN HEAD SCREWS (5).
Step 7
427150 www.litterbox.com/supportPage 12
Surface with
more holes
G
D
1/2" PAN HEAD SCREW
(2 used in this step)
5
The holes on this surface
are closer to this edge.

å Insert two WOOD DOWELS (3) into the BOTTOM (G).
å Place the FRONT (H) onto the WOOD DOWELS in
the BOTTOM (G).
Step 8
427150www.litterbox.com/support Page 13
H
G
3

å Insert two WOOD DOWELS (3) into the FRONT (H).
å Fasten the BOTTOM SHELF (J) to the tabs on the RIGHT
FRAME (D). Use two 1/2" PAN HEAD SCREWS (5).
å NOTE: Be sure the WOOD DOWELS in the FRONT insert
into the SHELF.
Step 9
427150 www.litterbox.com/supportPage 14
1/2" PAN HEAD SCREW
(2 used in this step)
5
3
J
H
Surface with holes
D

å Fasten the LEFT FRAME (C) to the BRACES (E). Tighten
eight 1/2" HEX HEAD SCREWS (7) using the L-WRENCH (4).
å NOTE: Do not completely tighten the SCREWS in this step.
Step 10
427150www.litterbox.com/support Page 15
4
1/2" HEX HEAD SCREW
(8 used in this step)
7
C
The tabs
must be here.
E
E
E
E

å Fasten the tabs on the LEFT FRAME (C) to the BOTTOM (G)
and BOTTOM SHELF (J). Use four 1/2" PAN HEAD SCREWS (5).
Step 11
427150 www.litterbox.com/supportPage 16
J
C
G
1/2" PAN HEAD SCREW
(4 used in this step)
5

å NOTE: This step shows a different view.
å Fasten the RIGHT END (A) to the BACK (F). Tighten one
HIDDEN CAM.
å Fasten the LEFT FRAME (C) to the BACK (F). Tighten four
1/2" HEX HEAD SCREWS (7) using the L-WRENCH (4).
Step 12
427150www.litterbox.com/support Page 17
4
1/2" HEX HEAD SCREW
(4 used in this step)
7
F
C
A
Tighten the HIDDEN CAM
Go on, spoil 'em a little.

å NOTE: This step shows a different view.
å Fasten the MIDDLE SHELF (K) to the tabs on the FRAMES (C
and D). Use three 1/2" PAN HEAD SCREWS (5).
Step 13
427150 www.litterbox.com/supportPage 18
1/2" PAN HEAD SCREW
(3 used in this step)
5
D
K
C

å Fasten the TOP SHELF (L) to the tabs on the FRAMES (C
and D). Use three 1/2" PAN HEAD SCREWS (5).
å Completely tighten the SCREWS in the BRACES (E) using
the L-WRENCH (4).
Step 14
427150www.litterbox.com/support Page 19
1/2" PAN HEAD SCREW
(3 used in this step)
5
D
L
C
E
E
E
E
4
Completely tighten the
SCREWS in the BRACES (E).

å NOTE: This step shows a different view.
å Fasten the TOP SHELF (L) to the BACK (F). Use one 1-9/16"
PAN HEAD SCREW (6).
å Use the FURNITURE TIPPING RESTRAINT KIT (96) for
added stability. Fasten the SAFETY STRAP to the BACK (F)
using the SHORT SCREW.
Step 15
427150 www.litterbox.com/supportPage 20
L
F
1-9/16" PAN HEAD SCREW
(1 used in this step)
6
96