Living Heat i8 User manual

Download the Smart Life app
from the IOS or Android Store.
And create a unique account and
password.
In the home screen of smart life.
Press on the area highlighted to add
a thermostat to the App.
On the next screen please select small home appliances and then search the
list until you reach thermostat (Wi-).
Select your Wi-Fi network and enter
the Password for your router at home.
Press Next.
To get the thermostat ready to pair to
device/app, hold down the up & down
arrows on thermostat Until F1 appears.
If F2 appears then let go and then
press the up and down arrows again
until F1 appears.
Please also make sure the device Is
Reset rstly. Once F1 appears on Screen
then press tick box on bottom Left of
screen on the app.
Ez mode should also be shown on top
right of app screen (if not please select
on the drag down option).
Press next at the bottom of Screen on
the app.
Wi-Fi Thermostats SmartLife Connection
Thank you for purchasing one of our products and for your support.
F 1
1 2
3
4 5

The thermostat should now
pair to the device.
If the thermostat fails to connect
in Ez Mode on the app and F1
mode on the thermostat, then
Repeat Steps 2, 3 and 4.
By holding down the up and down
arrows please select F2 on the
thermostat screen.
On the top right corner of the app
select AP mode on the screen and
press the tick box at bottom left of
the screen.
Press Next
On the next screen. Press go to connect. This should take you
directly Into your phone settings (See Below).
If not then exit app (Don’t Close) and go into settings as shown on
below (Middle Screenshot).
Then select Smart Life in ‘my Networks’or‘wi Fi Network’
You should then be directed back to the app. If not go back into the app and the countdown
screen should appear.
The thermostat should now pair to the device.
F 2
6 7
8
9
ANDROID APP IOS APP