Living Heat SmartLife User manual

Download the Smart Life app
from the IOS or Android Store.
And create a unique account and
password.
In the home screen of smart life.
Press on the area highlighted to add
a thermostat to the App.
On the next screen please select small home appliances and then search the
list until you reach thermostat (Wi-).
Select your Wi-Fi network and enter
the Password for your router at home.
Press Next.
To get the thermostat ready to pair to
device/app, hold Set & OK buttons on
the thermostat until both cloud & wi-
symbol appear ashing together.
if cloud only appears then let go and
then press Set & OK button again until
both symbols appear on left of screen.
please also make sure device is reset
rstly. once both symbols appear on
screen. Press the tick box on bottom
left of screen on the app.
ez mode should also be shown on top
right of app screen (if not please select
on the dragdown option).
press next at bottom of screen on the
app.
Wi-Fi Thermostats SmartLife Connection
Thank you for purchasing one of our products and for your support.
1 2
3
4 5

The thermostat should now
pair to the device.
If the thermostat fails to connect to the
thermostat then repeat steps 2,3 and 4.
hold down the Set and OK button until
the cloud symbol only appears on the
thermostat screen.
on the top right corner of the app select
app mode on the screen and press tick
box at bottom left of screen.
press next
On the next screen. Press go to connect. This should take you
directly Into your phone settings (See Below).
If not then exit app (Don’t Close) and go into settings as shown on
below (Middle Screenshot).
Then select Smart Life in ‘my Networks’or‘wi Fi Network’
You should then be directed back to the app. If not go back into the app and the countdown
screen should appear.
The thermostat should now pair to the device.
6 7
8
9
ANDROID APP IOS APP