Living Spaces 288045 User manual

Date:
Cammarata Leather Power Recliner
288045
ASSEMBLY INSTRUCTIONS
12/21/2020
Page 1 / 7

·
·
·
·
·
·
·
·
·
·
Assembly Instructions
Troubleshooting
Care & Maintenance & Warnings
Date:
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
intergrity of the item.
Read all instructions carefully before unpacking assembly parts. Sharp, exposed staple tips can cause injury. For
your protection, please remove any exposed staples used in packing.
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until assembly is
complete.
12/21/2020
Page 2 / 7
TABLE OF CONTENTS
Parts List
Page 3
Pages 4~5
Pages 6
Pages 7
For your safety, assembly by two or more adults is recommended.
Keep instructions for future use.
Intended for residential use only.
Keep small parts and hardware out of the reach of children.
PRE-ASSEMBLY INSTRUCTIONS:
Remove all parts and hardware from the box and place them on a carpeted or scratch-free work surface.
Prior to starting assembly, use the parts and hardware lists to identify and separate each of the pieces included.
Do not over-tighten screws or bolts.
IMPORTANT SAFETY INSTRUCTIONS:

PART # QTY
A1
B1
C1
D
E
F
G
Date:
Thank you for your purchase. Be sure to check all packing material carefully for small parts which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the parts and hardware
lists.
12/21/2020
Page 3 / 7
Seat Base
AC Power Cord
With red guide tape and
you can find it in the
carton
PARTS LIST
PICTURE
PART DISCRIPTION
LOCATION
Back Cushion

Date:
Step 1: Slide the KD back into the steel mechanism posts in the base of
the furniture.
Step 2: Press both sides of the back firmly into place.The back
automatically locks into place.
STEPS
12/21/2020
Page 4 / 7

Date:
Step 3: Attach the outside back along the bottom rear of the base frame
with pre-attached velcro.
Step 4: Connect the AC power cord to the main switch behind the arm,
and finally connect the cord with a power source.
STEPS
STEPS
12/21/2020
Page 5 / 7

Date:
If the motor or button don't work, please check the power connect as
below steps:
Step 1: Turn down the product, and find the zipper bag under the arm
frame
Step 2: Open the bag and find the transformer and connecting cable
Step 3:Check if the plug has been inserted into the transformer
completely.
TROUBLESHOOTING
12/21/2020
Page 6 / 7

Leather Care Tips
·
·
·
·
·
·
·
·
·
·
·
·
·
Date:
12/21/2020
Page 7 / 7
Intended for residential use only.
If pillow cushions are sewn to the frame, any pulling or tugging may result in a tear.
WARNING
Do not use this product unless all screws and bolts are securely tightened.
Check that all screws and bolts are secure every three months or as needed
Dispose of packing material properly. Do not use plastic cover as head covering as it may cause suffocation.
Do not use this product as a stepladder.
Use this product for intended purpose only.
CARE & MAINTENANCE
Fabric can fade when exposed to direct sunlight over a long period of time.
To minimize fading, avoid placing your furniture in direct sunlight.
Avoid cleaners which use chemical products. Many of these are harsh and not safe for use on upholstery.
Stress to the fabric may result in tears and when stretched, upholstery may not completely return to its original shape.
Avoid sitting in one area and use the seating areas evenly for even wear.
Leather and fabric are not resistant to animals. Allowing pets on your upholstered furniture is not recommended.