Living Spaces Sophia II E King User manual

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Bed feet are packed in headboard carton.
1 2
Step#1
Retrieve bed feet from carton fastened behind the headboard.
Attach bed feet (F) to the headboard .
Attach bed feet (F) to the footboard .
Step#2
Attach side rails to headboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
Attach side rails to footboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
F
H=10CM
4PCS
Sophia II E/C King Assembly Instructions
*Bolt B and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in side rails carton to attach center support system.
3 5
Step#3
Attach steel center support legs (J) to the Metal slat (G) using Wrench (I), Bolt (T) and
Washer (D).
Step#4
Move/place bed into final position in bedroom.
Step#5
Attach steel slat support system to full length steel side support cleats(flat side facing up).
Verify the metal slats are installed properly into support cleats and center support legs are
perpendicular to the floor for full support.
A
D
I
G
J
T
Φ6*15MM
Φ6 MM
Φ8 MM
Metal Slats
Center support legs
H=16CM
Φ6*20MM
8PCS
16PCS
1PC
4PCS
8PCS
8PCS
Sophia II E/C King Assembly Instructions