Living Spaces Sedona 7030-01280 KIT User manual

Sedona Collection: Bronco Caster Bed
PARTS LIST
BOX 1: 4799 Bronco Caster Ends
Part # Description Quantity
S0040END Bronco Caster End Assembly 2
5045-65303 Caster Wheel 4
5045-65301
Caster Wheel Insert 4
BOX 2: 4798 Bronco Caster Frame
Part # Description Quantity
S1001SRL 5/4 x 6 x 75 Mattress Rail 2
149383/40 Twin Individual Slat 3
5040-43181 Hex Lag Bolt/Washer 8
5040-35410 #6 x 1 1/4 Phil Flat Slat Screw 10
Picture
7030-01280 KIT
For: 4798 Frame Rails/4799 Caster Ends
Picture
COMPLETED ASSEMBLY

1) Attach two mattress rails (S1001SRL) to end assemblies(S0040END) with 8 lag bolts and 8 washers
(5040-43181), and tighten. Use either the top set of holes or bottom set of holes depending on
preference.
2) Attach the caster wheels (5045-65303) to the end assemblies using the pre-drilled holes on the
bottom. Be sure to insert the caster wheel inserts (5045-65301) first, and then insert the caster wheel
stems into the inserts pushing them in fully. **Attempting to drive the inserts in with the caster wheels
attached may cause damage to the wheels**
3) Place slat kit (purchased separately) and 3 individual slats (149383/40) in accordance with the
diagram on the last page of these instructions. Attach the 5 designated slats to the mattress rail cleats
using the #6x1 ¼” screws (5040-35410).
S0040END
5040-43181
5045-65301
5045-65303
S1001SRL

Installation of individual slats for use with Slat Roll (Slat roll sold separately) See your retailer for purchase of Slat Roll
SCREW
SCREW
SCREW
SCREW SCREW SCREW SCREW
SCREW
SCREW
SCREW
INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS
Installation of individual slats for use with Bunkie Board (Bunkie Board sold separately) See your retailer for purchase of Bunkie Board
SCREWSSCREWSSCREWSSCREWSSCREWSSCREWS
INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS
When used with a slat roll, the three
individual slats should be placed evenly in the gaps and underneath the strapping before fastening.
Individual Slat
Individual Slat
Individual Slat
Diagram 1 Diagram 2
Scan Code for Instructional video