Living Spaces CATANIA DE-CATA-OAK-B03-80 User manual

Drawer chest 1
LIST OF PARTS AND HARDWARE
A
Description
No. Q'ty
CAUTION:
ATTENTION:
CUIDADO:
B1
A
B
Drawer bottom veneer
LIST OF PARTS AND HARDWARE
Q'ty
No. Description
ASSEMBLY INSTRUCTIONS
CATANIA 4 DRAWER CHEST
LS SKU#326514
MODEL # DE-CATA-OAK-B03-80
1Tipping 2
PLEASE READ ALL INSTRUCTIONS BEFORE STARTING THE ASSEMBLY OF THIS PRODUCT. THESE PIECES ARE HEAVY.
IN ORDER TO PREVENT PERSONAL INJURIES AND ENSURE THAT THIS PRODUCT IS NOT DAMAGED DURING THE
ASSEMBLY PROCESS, IT IS STRONGLY RECOMMENED THAT YOU REQUIRE HELP FROM ONE OR MORE PEOPLE.
VEUILLEZ LIRE TOUTES LES INSTRUCTIONS AVANT DE COMMENCER L’ASSEMBLAGE DE CE PRODUIT. LES
DIFFÉRENTES PARTIES SONT LOURDES AFIN DE PARER TOUTE BLESSURE ET D’ÉVITER QUE LE PRODUIT NE SUBISSE
DES DOMMAGES. IL EST FORTEMENT RECOMMANDÉ DE DEMANDER DE L’AIDE DE LA PART D’UNE OU PLUSIEURS
PERSONNES DURANT L’ASSEMBLAGE.
FAVOR DELEER TODES LAS INSTRUCCIONNES ANTES DE ENSAMBLAR SU PRODUCTO. ESTAS PIEZAS SON PESADAS.
PARA PREVENIR HERIDAS PERSONALES Y ASEGURAR QUE SU PRODUCTO NO SEA DAN ADO MIENTRAS ES
ENSAMBLADO SE RECOMIENDA LA ASISTENCIA DE UNA O MAUS PERSONAS.

Step 1
Step 2
A
B
ASSEMBLY INSTRUCTIONS
CATANIA 4 DRAWER CHEST
LS SKU#326514
MODEL # DE-CATA-OAK-B03-80
Drawer slide length: 250mm
A
Drawer slide length: 250mm

Step 3
ASSEMBLY INSTRUCTIONS
CATANIA 4 DRAWER CHEST
LS SKU#326514
MODEL # DE-CATA-OAK-B03-80
Pre-installed adjustable feet
Use level to adjust
feet if needed,
level not included

Anti-tip Kit
Assembly Instruction
To prevent injury and property damage from unexpected tipping of furniture,
we highly recommend installation of the anti-tip kit included with this product.
Determine where the piece is to be
placed and mark location on the
wall for the mounting bracket screw
holes. They should be placed
approximately 1” below the top on
the back of the piece of furniture.
Attach the mounting bracket
vertically/ horizontally to the wall by
inserting the long screws provided
through the holes in the bracket and
tightening securely using
screw-driver.
Screws must penetrate wall studs for
proper installation.
Step 4
Step 5
ASSEMBLY INSTRUCTIONS
CATANIA 4 DRAWER CHEST
LS SKU#326514
MODEL # DE-CATA-OAK-B03-80
WALL *
*Repeat for all 2screws.

Step 6
Step 7
Next using the short screws attach
the 2nd bracket to the back of the
piece of furniture’s top.
wood Screws
X2
Bracket
X2
Lace the nylon strap down
through the brackets. Slide the
thin end of the strap through the
receiving end of the nylon strap.
Pull to tighten the piece of
furniture snug against wall.
X2
ASSEMBLY INSTRUCTIONS
CATANIA 4 DRAWER CHEST
LS SKU#326514
MODEL # DE-CATA-OAK-B03-80
*
FURNITURE
*Repeat for all 4 screws
*
WALL FURNITURE