Livoo TES238 User manual

User manual
WWW.LIVOO.FR
Reference : TES238
Version : 1.4
Lan ua e : En lish
Bluetooth® compatible
headphone

User manual
1
Thank you for buyin our LIVOO product. We take reat care in desi n, er onomics and ease of use of our
products. We hope that this product will ive you complete satisfaction.
This manual is also available on www.livoo.fr
GENERAL INSTRUCTIONS
PLEASE TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY BEFORE THE FIRST USE.
A misuse of the appliance can dama e it or hurt the user. Assure that you use the appliance for the use for
which it is desi ned; we refuse any responsibilities as for the dama es by an incorrect use or a bad
manipulation.
•Before usin the appliance for the first time, please read carefully these instructions and save it for
any further need.
•Keep this product away from water, liquids or humid areas.
•Keep this product away from naked flames such as candles.
•The unit comes with a rechar eable battery so please do not throw it into fire to avoid explosion.
•The product should only be supplied by the power source indicated on the label.
•Do not place the product in direct sunli ht or heat. Keep away from temperatures over 40℃.
•Do not press the buttons too hard as it could dama e the product.
•Do not use a wet cloth on the product. In order to clean it, always use a dry cloth. Keep it free from
dust.
•Do not use chemicals on this product.
•Never attempt to repair this product yourself. Any operation that requires openin the product
should be left to a qualified technician.
•When the product is not in use, make sure it is shut off and stored in a cool and dry place.
•Do not insert any forei n object into the product.
•Adult Supervision is recommended with children usin this product.
•Avoid droppin or standin on the product, as harsh impacts could dama e the product.
•Make sure children and infants do not play with plastic ba s or any packa in materials.
•Please follow the instruction to operate.
•Please char e the headphone with input power below 5V/1A in order to protect the battery.
•Please store or use the headphone in a normal temperature environment.
•Please keep away your headphone from heat source such as radiator, hot air re ulators, stoves or
other heat eneratin instruments. As it is not anti-hi h temperature.
•Don’t jam the ports of the appliance such as char er port, LED port and microphone etc.
•In order to protect your hearin and extend the speaker service life, it is not recommended to
adjust the volume to the maximum level for a lon time.
•Whatever reasons dama e the headphone, please feel free to contact our after dales staff in time
rather than repair by yourself.

User manual
2
SPECIFICATIONS
Bluetooth version: V5.0
Battery: Polymer Li-ion - capacity 200mAh
Wireless workin ran e: 10m
Frequency ran e: 20Hz-20 KHz
Sensitivity: 110dB±3dB at 1 KHz; 1mW
Impedance: 32Ω±15%
Speaker size: 40MM
Playin time: 3-4 hours
Voice chat: supported
Input volta e: DC 5V
Profiles supported: HFP/HSP/A2DP/AVRCP
PRODUCT DIAGRAM
1. Micro SD card slot
2. Volume -, previous
3. Play / pause
4.Volume+/next
5. LED indicator
6. USB char in port
7. AUX in
8.Microphone
9.Multi-function button
MAIN FUNCTIONS
Instructions for charging
Before use the headphone for the first time, please char e it full.
Char in time is approximately 3 hours for a full char e.
Use only the micro USB cable supplied with the unit.

User manual
3
Plu the micro USB cable into micro USB char in port and connect the other end of the cable to either a
computer USB port or to a USB- compatible car or wall char er.
A red LED li ht will appear to indicate when the headphone is char in . When char in is complete, the
LED li ht will turn off.
ON/OFF
1. On: Press and hold the Multi-function button (9) for 3 seconds.
2. Off: Press and hold the Multi-function button (9) for 3 seconds to turn off.
Bluetooth® pairing
If the unit has never been paired with a Bluetooth® device before, you need to follow the instructions
below to pair the headphone with your Bluetooth® device:
1. Lon press on button (9) to turn on the headphone, then the heardphone will automatically enter
pairin with LED flashin alternately red and blue.
2. Activate the Bluetooth® function and search for pairin name TES238.
3. Click TES238 to connect, if indicator turn blue it is ok.
4. Pairin mode can last 10 min, if you miss the pairin time, you need to restart the device and repeat
above steps.
5. When turnin on the headphone can automatically coonect to the last device that you had paired.
6. The headphone will automatically turn off if headphone has no connection or lose connection for
10min.
The headphone will connect automatically, if paired before.
Answer/End a call
Press the button (9) to answer a call and to end a call.
Tip: since some mobile phones default to answer calls via their own receiver, please refer to the instruction
of your phone and set on your phone.
Reject a call
Press 2 seconds the button (9) to reject a call.
Redialing
Double press the button (9) to redial the last number in you call lo s
Pla /Pause
When the Bluetooth® headphone connects to the device, short press the play/pause button (3).
NEXT: lon press to select next son
PREV: lon press to select previous son
VOL +: short press to increase volume
VOL -: short press to decrease volume

User manual
4
Switching mode:
Lon press play/pause button to select mode between Bluetooth/FM/SD CARD/AUX in
FM mode:
Lon press play/pause button for 2 seconds to select FM mode, then press play/pause button to scan and
memorize the FM radio stations.
Lon press and to select the desired channels. Press and hold the or button to adjust the
volume.
MICRO SD mode:
Insert micro SD card, the headphone will automatically reco nize and broadcasts MP3 format music in it.
Wired music mode:
By connectin the headset to a music player with the supplied dual 3.5 mm audio cable, the headset can
be used as a wired headset.
The buttons are inactive in this mode.

User manual
5
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
Bluetooth® compatible headphone
TES238 (Frequency ran e 2402MHz-2480MHz)
Fulfils the essential requirements of the Directive 2014/53/UE
The followin standards were applied:
Radio:
EN 300 328 V2.2.2: 2019-07
EMC:
EN 301 489-1 V2.2.2.3: 2019-11
EN 301 489-17 V3.1.1: 2017-02
EN 62479: 2010
Health and Safety:
EN 62638-1 2014+A11 2017
Mundolsheim, 17/11/2020

User manual
6
Correct disposal of the unit
(Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems
countries)
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical
appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order
to optimize the recovery and recyclin of the materials they contain and reduce the impact on human health and the
environment. The symbol of the crossed out dustbin is marked on all products to remind the obli ations of separate collection.
Consumers should contact their local authority or retailer for information concernin the correct disposal of their product.
•Non contractual illustration
•Product information is subject to chan e without prior notice.
LIVOO
BP 61071
67452 Mundolsheim