Livoo DOP189 User manual

Instruction manual
WWW.LIVOO.COM
Reference: DOP189
Version: 1.4
Language: nglish
Stand mixer

Instruction manual
1
You have purchased a product LIVOO brand and we thank you. We take great care in design, ergonomics and ease of
use of our products. We hope that this product will give you complete satisfaction.
This instruction manual is available too on our website www.livoo.fr
General Instructions
PL AS , TAK TIM TO R AD W LL TH INSTRUCTIONS FOR US
PARTICULARLY B FOR TH FIRST US .
A misuse of the appliance can damage it or hurt the user. Assure that
you use the appliance for the use for which it is designed; we refuse
any responsibilities as for the damages by an incorrect use or a bad
manipulation.
1. Check that your mains voltage corresponds to that stated on
the appliance.
2. The safety instructions do not by themselves eliminate any
danger completely and proper accident prevention
measures must always be used.
3. This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
4. Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
5. Children shall not play with the appliance.

Instruction manual
2
6. Do not attempt to repair the appliance yourself, since you
will be exposed to hazardous live components or other
hazards by opening and removing the covers.
7. Do not use the appliance outdoor, place it in a dry
environment, and only use the appliance for domestic
purposes and in the way indicated in these instructions.
8. Never leave the appliance unsupervised when in use.
9. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard (*).
10. Place this appliance as close as possible to the power source
so that you can disconnect the plug quickly and easily.
11. Never immerse the base of your appliance in water or any
other liquid for any reason whatsoever. Never place it into
the dishwasher.
12. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or
cleaning. Do not allow children to use the blender without
supervision.
13. Never move the appliance by pulling the cord. Make sure the
cord cannot get caught in any way. Do not wind the cord
around the appliance and do not bend it.
14. Unplug the appliance when not in use.
15. Avoid contacting with moving parts. Keep hands, clothing, as
well as spatulas and other utensils away from beaters during

Instruction manual
3
operating to reduce the risk of injury to people, and/or
damage to the mixer.
16. The appliance is not intended to be operated by means of
external timer or separate remote control system.
17. Keep this manual with the appliance. If the appliance is to be
used by a third party, this instruction manual must be
supplied with it.
18. To avoid electric shocks, do not use this device in the vicinity
of water. Do not immerse the mains lead in water or other
liquid.
19. Do not kink or clamp the mains lead. To avoid any risk of
stumbling, do not allow the mains lead to hang over the edge
of a table or a counter.
20. This appliance should not be set up in close proximity to a
naked flame, easily flammable materials (curtains, textiles,
etc.), a radiator, an oven or some other heat source.
21. Before use, place the appliance on a horizontal and flat
surface.
22. The appliance should only be used for its intended purpose.
23. During use, do not touch moving parts with your fingers.
24. No liability is accepted for damage due to improper use or
the failure to observe our operating instructions / safety
notes.
25. Be sure to turn the speed selector to 0 position after each
use .

Instruction manual
4
26. Switch off the appliance and disconnect from supply before
changing accessories or approaching parts which move in
use.
27. Never pull out mixing beater/dough hook/egg whisk when
the appliance is in operation.
28. Be careful if hot liquid is poured into the food processor or
blender as it can be ejected out of the appliance due to a
sudden steaming.
29. Regarding the instruction for cleaning surfaces in contact
with food or oil thanks to refer to the below paragraph
“cleaning” in manual.
30. It is absolutely necessary to keep this appliance clean at all
times as it comes into direct contact with food.
31. There is potential injury from misuse
32. Regarding the instructions for the use of accessories,
operation times and speed settings, thanks to refer to the
below paragraphs
33. Accessories, other than those supplied with the appliance,
shall include instructions for their safe use.
34. Care shall be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning
35. This appliance is intended to be used in household and
similar applications such as:
• staff kitchen areas in shops, offices and other
working environments

Instruction manual
5
• farm houses
• by clients in hotels, motels and other
residential type environments
• bed and breakfast type environments
(*)
Competent qualified electrician: after sales department of the producer or importer or any person who
is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any
case you should return the appliance to this electrician.
SP CIFICATIONS
Voltage: 220-240V~ 50- 0Hz
Power: 1000W
KB: 15min for mincer and beater function 1cycle/ 10 min for kneader function 1 cycle / 4 min on 1 min off
for blender function 10 cycles
D SCRIPTION
1. Measuring cup
2. Blender lid
3. Blender jar
4. Mixing bowl
5. Bowl cover
6. Head
7. Lever knob
8. Control button
9. Base
10. Kneading hook
11. Mixing blade
12. gg whisk
13. Cover of blender
Place
14. Grinder place

Instruction manual
6
1.
Sausage funnel
5.
Tagliatelle
disc
9. Medium disc
13
.
Funnel
2.
Lock ring
6.
Thin Spaghetti disc
10. Fine disc
14.
H
opper
plate
3. Sausage adapter 7. Wide Spaghetti disc 11. Blade 15. Pusher
4. Macaroni disc 8. Disc (coarse) 12. Feed screw 16. Cover of grinder place

Instruction manual
7
USING YOUR APPLIANC
Before first use:
Before assembling or disassembling the appliance, be sure it is unplug and speed selector on OFF position
and put it on stable surface. Clean all accessories, lids, bowl, meat grinder, upper plate, blender with soapy
water, rinse and dry thoroughly, wipe the main unit and base with damp soft cloth.
Setting up and assembling of the bowl and accessories:
Before assembling bowl and accessories, make sure the power cord is disconnected.
1. Turn the level knob (7) in anti-clockwise direction to lift the head of appliance.
2. Assemble the mixing bowl filled with ingredients, then lock it clockwise.
3. Insert the kneading hook or the egg whisk or the mixing blade into the drive shaft and lock it
clockwise
4. Press the swiveling arm downwards by turning the level knob in clockwise direction.

Instruction manual
8
Setting up and assembling of the blender:
1. Before placing the blender make sure the power cord is disconnected.
2. Put the blender jar on the drive shaft vertically without rotating it. Do the same by removing the
mixer.
Setting up and assembling of the meat grinder:
1. Before assembling the meat grinder, make sure the power cord is disconnected and blender
cover well fitted.
2. Turn the level knob so as to move the head of mixer downwards.
3. Remove the safety cover of meat grinder (16) clockwise.
4. To assemble the funnel (13):
•Introduce the feed screw (12) into the funnel, long end first
•Push the cutting blade (11) on the feed screw with the blade facing the front. If not fitted properly,
meat will not ground.
•Add the disc (8/9/10) you want to use after the cutting blade, fitting protrusions in the slots.
•Support or press the center of the cutting plate with one finger then screw the lock ring (2) until
tight with another hand. Do not over tighten.

Instruction manual
9
5. Put the funnel into the housing hole by turning it right side first, push the locking button and in the
same time lock it by turning it anti clockwise.
6. Place the hopper plate (14) on the funnel (13) and fix into position above the motor block.
Setting up and assembling for sausage making:
1. Place sausage adapter (3) on the feed screw.
2. Insert the sausage funnel (1) in the lock ring (2).
3. Turn the lock ring with the sausage attachment clockwise onto the feed screw.
Commenté [RH1]: Pour le sortir ? pour le monter à ce
stade
si oui, il faut préciser que c’est pour le sortir