Lloyd Pascal Double Mirror Cabinet User manual

we love home
lloydEst
1919
.
pascal
Hi there,
Meet your new
Lloyd Pascal
Double Mirror
Cabinet
1
Customer Helpline
If you need help or have damaged or missing parts, call our customer helpline
0121 776 5720
Assembly instructions- Please keep for future reference
Issue 2- 10/02/2022
056.50.342M
056.94.342M

Lloyd
Pascal
tak a p of your LP
product and
#Lloydpascal
#LPfurniture #LPhome
Are you your purchase?
Yes:
No:
we love home
lloydEst
1919
.
pascal
2

Safety and Care Advice
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Care and maintenance
Additional Guidance
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• This product has been constructed
to be used in the domestic
environment only and not for
commercial purposes.
• Assemble the item as close to its
nal position (in the same room) as
possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
oor.
• We do not
recommend the use
of power drill/drivers
for inserting screws
as this could damage
the unit. Only use
hand screwdrivers.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging carefully
and responsibly.
• Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
• From time to time check that there
are no loose screws, nuts or bolts. If
there are please re-tighten.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
• Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten
the bolts.
• Regularly check and ensure that all bolts and ttings are tightened properly.
3
we love home
lloydEst
1919
.
pascal

K L
A B C
D E F
H I
Fittings
Please check that you have all the fittings listed below
NOTE: The quantities below are the correct amount to complete the assembly. In some cases
more ttings may be supplied than required.
Male camlock x2 Female camlock x2 Wooden dowel x16
Screw x2 Screw x6 Push to open
mechanism x2
Hinges x4 Screw x16
G
Catch plate x 2
J
Shelves support x8 Screw x4 Wall plug x4
Bag 1
we love home
lloydEst
1919
.
pascal
4
Tools required
Crosshead screwdriver
Ruler/tape
measure
Eye protection
Mallet Power drill

Panels
12 3
456
7 8 9
Top panel Bottom panel Right side panel
Left side panel Support bar x2 Hardboard back
Internal shelves x2 Right mirror door Left mirror door
we love home
lloydEst
1919
.
pascal
5

1
3
4
5
5
E F
Screw x4 Push to open
mechanism x2
C
Wooden dowel x8
C
J K L
A B C
D E F
G H I
Male camlock x2 Female camlock x2 Wooden dowel x16
Screw x2 Screw x6 Push to open
mechanism x2
Catch plate x2 Hinges x4 Screw x16
Shelves support x8 Screw x4 Wall plug x4
1
2
we love home
lloydEst
1919
.
pascal
6

6
C
Wooden dowel x4
D
Screw x2
D
3
4
2
we love home
lloydEst
1919
.
pascal
7

WARNING: Please
refer to page 10 for
further details on
camlocks.
7
7
JJ
JJ
JJ
JJ
NOTE: You can fix the
shelves to your liking
A B C
Male camlock x2 Female camlock x2 Wooden dowel x4
J
Shelves support x8
5
6
1
we love home
lloydEst
1919
.
pascal
8

9
K
K
L
K
K
L
WARNING: Before
drilling, check wall for
hidden pipes and cables
E
H I
Screw x2
Hinges x4 Screw x16
I
I
K L
Screw x4 Wall plug x4
L
L
G
Catch plate x2
G
G
REPEAT: On
each corner.
WARNING!
IN ORDER TO PREVENT OVERTURNING
THIS PRODUCT MUST BE USED WITH THE
WALL ATTACHMENT DEVICE PROVIDED
7
8
8
9
TWO PERSON
LIFT REQUIRED
we love home
lloydEst
1919
.
pascal
9
ASSEMBLY
COMPLETE
Refer to page 10
for further details
on fitting hinges

Using camlocks
Adjusting hinges
Step 1 Step 3
Step 2
Hinge adjustment
Step 4
a: b: c:
Connect the male
camlock as directed in
the assembly instructions
using a screwdriver.
Push the male camlock
into every hole.
Insert the female
camlock as shown in the
instructions.
Note: Ensure that the
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
a: To move the top panel
up or down, loosen
screws shown and
move top panel to suit.
b: To move the top panel
in or out, loosen screws
shown and move top
panel to suit.
Retighten screws
c: To move the top panel
left or right, adjust
screws shown.
Turn the female camlock
with a screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
we love home
lloydEst
1919
.
pascal
10
For how to use
camlocks watch
our video
https:// vimeo.com/
340876871

Important note:
Types of walls
Important: when drilling into walls always check
that there are no hidden wires or pipes etc.
Care & Maintenance
You can use one of the following types of wall plug if your walls are
made of brick, breeze block, concrete, stone or wood.
Safety: Always check the fitting and
location to ensure your safety in and
around the home.
Fitting: From time to time check the
fitting to ensure the wall plugs or
screws do not become loose.
A Guide to Wall Mounting & Fixings
If plastic wall plugs (rawl plugs)
are supplied with your product,
eg:
No. 1 “General Purpose” wall plug
No. 2 “Plasterboard” wall plug
Generally aerated blocks should
not be used to support heavy loads,
use a specialist tting in this case.
For light loads, general purpose
wall plugs can be used.
For use when attaching light loads
onto plasterboard partitions.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with heavier loads such as
TV and HiFi speakers and satelite
dishes etc.
For use with plasterboard partitions
or hollow wooden doors.
For use with walls stuck with
plasterboard. The hammer xing
allows it to be xed to the wall
rather than the plasterboard.
Always check the xing is secure to
the retaining wall.
No. 3 “Cavity Fixing” wall plug
No. 4 “Cavity Fixing - Heavy Duty”
wall plug
No. 5 “Hammer Fixing” wall plug
No. 6 “Shield Anchor” wall plug -
heavy loads
Make sure that the screws and wall plugs being used are suitable for
supporting your unit. Consult a qualied tradesperson if you are unsure.
Hints:
1. General rule: always use a larger screw and wall plug if you are not sure.
2. Ensure you use the recommended drill bit to match the wall plug and hole
size.
3. Ensure you drill the hole horizontally; do not force the drill or enlarge the
hole.
4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure
wall plugs are inserted beyond the thickness of the ceramic tiles to avoid
the tiles splitting or cracking.
5. Ensure wall plugs are well tted and are a tight t in the drilled hole.
• these are suitable for use in
masonry walls
If you are in any doubt about the
correct wall plugs for your wall,
seek professional advice.
Failure of the product due to
using the incorrect xings is the
responsibility of the installer.
11