Lloyd Pascal Shaker Caddy User manual

1
Customer Helpline
If you need help or have damaged or missing parts, call our customer helpline
0121 776 5720
Assembly instructions- Please keep for future reference 053.96.130M
lloydEst.
1919
we love home
pascal
Issue - 03/09/2021
Hi there,
Meet your new
Lloyd Pascal
Shaker Caddy

Lloyd
Pascal
tak a p of your LP
product and
#Lloydpascal
#LPfurniture #LPhome
Are you your purchase?
Yes:
No:
lloydEst.
1919
we love home
pascal

3
Safety and Care Advice
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Care and maintenance
Additional Guidance
• Keep children and animals away
from the work ar small part
• Make sure you have enough space
to layout the parts before starting.
• This product has been constructed
to be used in the domestic
environment only and not for
commercial purposes.
• Assemble the item as close to its
possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
•
• We do not
recommend the use
of power drill/drivers
for inserting screws
as this could damage
the unit. Only use
hand screwdrivers.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging carefully
and responsibly.
• Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
• From time to time check that there
are no loose screws, nuts or bolts. If
there are please re-tighten.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
• Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten
the bolts.
•
To help prevent product toppling over please follow the steps below:
Do not allow children to climb or hang on the furniture
Do not open more than one drawer at a time
Do not place heavy items in the top drawer
Do not place heavy items on top of the furniture, unless the furniture has been designed for
this purpose
Please note that only the anti tip strap is provided. You will need to supply wall plugs and screws applicable for
your wall type.
WARNING
In order to help prevent overturning- please follow these instructions
lloydEst.
1919
we love home
pascal

Bag 1
Fittings
NOTE: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than required.
A
35mm Male camlock x 14
lloydEst.
1919
we love home
pascal
B
Female Camlocks x 14
C
30mm Dowel x 24
D
10mm Screw x 1
E
Safety strap x 1
F
Foot pad x 4
G
35mm Screw x 1
H
Washer x 1
I
Rawl plug x 1

5
Tools required
Phillips screwdriver Ruler/tape
measure
Eye protection
Power drill
Mallet
lloydEst.
1919
we love home
pascal

6
Hardware
Top x 1
(17(w) x 17(d) cm)
1Right side x 1
(78.5(h) x 15(d) cm)
2Left side x 1
(78.5(h) x 15(d) cm)
3
Rail x 4
(3.5(h) x 12(w) cm)
4Back rail x 1
(3.5(h) x 12(w) cm)
5Shelf x 2
(13(w) x 15(d) cm)
6
Shelf x 1
(12(w) x 15(d) cm)
7
lloydEst.
1919
we love home
pascal

7
1
lloydEst.
1919
we love home
pascal
35mm Male camlock x 2
X4
1
5
4
A
30mm Dowel x 24
C
10mm Screw x 1
D
Safety strap x 1
E
A
35mm Male camlock x 14
B
Female Camlocks x 14
C
30mm Dowel x 24
D
10mm Screw x 1
E
Safety strap x 1
F
Foot pad x 4
G
35mm Screw x 1
H
Washer x 1
I
Rawl plug x 1
A C
C
D
C
E

76
X2
8
2
lloydEst.
1919
we love home
pascal
Female Camlocks x 8
B
Female Camlocks x 12 Female Camlocks x 2
A B
3
3
B
B
2
3
B
A
A

9
4
lloydEst.
1919
we love home
pascal
5
5Foot pad x 4
F
2
6
6
7
4
4
44
5
F
2
4
4
4
42
2
6
6
7
3
6
6
7
5
4
4
4
4
F

10
6
lloydEst.
1919
we love home
pascal
735mm Screw x 1
G
Washer x 1
H
Safety Stay x 1
I
1
I
H
G
1
IH
G

11
Using camlocks
Step 1 Step 3
Step 2 Step 4
Connect the male
camlock as directed in
the assembly instructions
using a screwdriver.
Push the male camlock
into every hole.
Insert the female
camlock as shown in the
instructions.
Note: Ensure that the
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
Turn the female camlock
with a screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
lloydEst.
1919
we love home
pascal
For how to use
camlocks watch
our video
https:// vimeo.com/
340876871

12
Important note:
Types of walls
Important: when drilling into walls always check
that there are no hidden wires or pipes etc.
You can use one of the following types of wall plug if your walls are
made of brick, breeze block, concrete, stone or wood.
Safety: Always check the fitting and
location to ensure your safety in and
around the home.
Fitting: From time to time check the
fitting to ensure the wall plugs or
screws do not become loose.
are supplied with your product,
eg:
No. 1 “General Purpose” wall plug
No. 2 “Plasterboard” wall plug
Generally aerated blocks should
not be used to support heavy loads,
For light loads, general purpose
wall plugs can be used.
For use when attaching light loads
onto plasterboard partitions. heavy loads such as shelving, wall
cabinets and coat racks.
For use with heavier loads such as
TV and HiFi speakers and satelite
dishes etc.
For use with plasterboard partitions
or hollow wooden doors.
For use with walls stuck with
rather than the plasterboard.
the retaining wall.
No. 3 “Cavity Fixing” wall plug
No. 4 “Cavity Fixing - Heavy Duty”
wall plug
No. 5 “Hammer Fixing” wall plug
No. 6 “Shield Anchor” wall plug -
heavy loads
Make sure that the screws and wall plugs being used are suitable for
Hints:
1. General rule: always use a larger screw and wall plug if you are not sure.
2. Ensure you use the recommended drill bit to match the wall plug and hole
size.
3. Ensure you drill the hole horizontally; do not force the drill or enlarge the
hole.
4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure
wall plugs are inserted beyond the thickness of the ceramic tiles to avoid
the tiles splitting or cracking.
• these are suitable for use in
masonry walls
If you are in any doubt about the
correct wall plugs for your wall,
seek professional advice.
Failure of the product due to
responsibility of the installer.