Lloyd LR590SBST User manual

REFRIGERATOR
Instruction Manual
Model: LR590SBST

Dear Customer
Congratulations on being the proud owner of Lloyd
Refrigerator. Your Refrigerator comes with a Lloyd
Guarantee of Quality.
Lloyd takes great pride in providing its customers with
perfect products that adheres to international quality
standards.
Lloyd is committed to international quality standards.
Lloyd is committed to provide the ultimate customer
satisfied customers of Lloyd.
At Lloyd, feedback and suggestions based on your product
usage experience are greatly appreciated.
Please feel free to contact us at
[email protected]
NIPUN SINGHAL
DIRECTOR



TableofContents
Notice .................................................................................. 1
Warning ............................................................................... 2
Features .............................................................................. 3
Installation Procedure ......................................................... 4
Refrigerator Modes ............................................................. 5
Shelf Adjustment ................................................................. 6
Rack Adjustment ................................................................. 6
Refrigerator Compartment ................................................. 7
Freezer Compartment ......................................................... 9
Introduction to Functions ................................................. 10
Maintenance ..................................................................... 12
Troubleshooting ................................................................ 13
Energy Saving Tips ............................................................. 14

Notice
 Please read the safety instructions before using the
refrigerator.
 Due to Lloyd’s continuous improvement policy, the product
may be subject to change without prior notice.
 When disposing the refrigerator, kindly contact your local
waste disposal dealer for advice on safe disposal.
Warning
 The refrigerator uses an AC supply of 220-240V at 50 Hz
frequency. In case, the voltage fluctuation is high (over the
scope of 187 V – 264 V), it may cause permanent damage to
components like the compressor or the main board of the
refrigerator. In such a case, the installation of a voltage
regulator (above 1000 W) is highly recommended.
 In case of a power failure or during cleaning, pull out the
power plug. Wait for a period of at least 5 min before
reconnecting the plug to avoid any damage to compressor
due to continuous starts.
 Do not spray or rinse water on the refrigerator . This may
affect the electrical insulation of the refrigerator.
 Keep ventilation openings of the appliance clear of
obstruction
 Do not use any mechanical devices or other means to
accelerate the defrosting process.
 Take care that the refrigerant circuit is not damaged.
 Do not use or keep electrical appliances inside the appliance.
 Make sure the appliance is unplugged after use or during any
maintenance activity is being performed.
 The appliance is not intended for use by persons (including
children) with reduced physical, mental and sensory
1

capabilities, unless supervised by a person responsible for
their safety.
 If the supply cord is damaged, it should be replaced by Lloyd
Authorised service personal only.
 Do not put bottles of carbonated drinks in the freezer. It may
freeze the contents causing the bottle to break.
 Do not store explosive substances inside the appliance.
Features
 Everfresh Technology
Lloyd’s Everfresh Technology makes sure that the food stays fresh
for long periods of time.
 Defrost pre-cold
The defrost pre-cold technology helps in keeping the temperature
inside the refrigerator stable.
 Aptitude De-frosting
Lloyd’s intelligent Aptitude Defrosting System controls the
temperature inside the refrigerator as per the frequency of usage
thus giving a higher efficiency
 Anti-Heat Technology
The refrigerator has thick foaming in the anti-heat layer thus
minimizing energy losses
2


Opening Door Alarm

LED Information Screen

Vitamin Fresh Technology
Beeps if you leave open the door over 30 sec or if door is not properly
closed this will save a lot of energy and helps to keep the nutritional
value of food intact.
LED information touch screen with apps for easy operation.
(Available in model no LR590SBST.
LLOYD introduced a unique range of refrigerator, equipped
with revolutionary vitamin safe and hygine active
technology, that locks the nutritional value and keep it fresh
for longer duration.
 Gliding shelves
The freezer and refrigerator racks are special designed for
convenience of use for the consumer.
Other features are:
 CFC and No -Frost Design
LLOYD Refrigerator offers an environment friendly option with no frost
and no CFC release.
3

InstallationProcedure
 Please do not shake, tilt or invert the refrigerator when
moving, The tilt angle should not exceed an angle of 45
degrees.
 Please make sure that the refrigerator is not placed near any
heat source, in direct sunlight, in an environment with high
moisture.
 Please ensure proper circulation of air around the appliance.
Make sure that a gap of atleast 30 cms on both sides and 10
cms at the back of the refrigerator is kept.
 Make sure the appliance is installed on a level floor. If the
floor is not level, please make sure that a leveller is used to
ensure perfect alignment of the appliance.
 Remove all packaging material before using the refrigerator.
This includes foam at the base and adhesive tapes holding the
accessories inside and outside the appliance.
 Clean both, inside and outside of the refrigerator with a wet
cloth (a mild detergent can be used). Please make sure the
appliance is wiped dry.
 Prepare an independent socket with grounding contact for
the refrigerator. The appliance shouldn’t share a multi -
purpose socket with any other appliances.
 Install the bottom beam as shown in the figure.
Please take note that the
decorative beam at the bottom
is to give the appliance a better
look and not installing it would
not affect the performance of
the appliance.
4

RefrigeratorModes
 Intelligent Mode –In this mode, the refrigerator will
automatically set the temperature as per the load in the
compartment.
 Human Mode – This mode can be if you need to set the
temperature to a particular value as per your specific
requirement, you can use
=
1
2
3
4
5
8
6
7
9
10
5

ShelfAdjustment
You can adjust the shelves to a position as per your requirements.
For this, please move the shelf outwards in direction (1), turn the
shelf in direction (2) and then pull out the shelf in direction (3).
RackAdjustment
You can use this functionality for either cleaning the rack or
changing the height of the rack as per the height of the food. For
this, please hold with both hands move the rack I direction (1) and
then pull the rack towards you in direction (2).
—
?
?
—
?
6

RefrigeratorCompartment
Due to the nature of the air conditioning cycle, the temperatures in
all the areas of the refrigerator are different Hence, different types
of foods should be placed in different compartments. Following are
the recommendation of food types to be stored in compartments:
1. Store pasta, milk, etc.
2. Store fast food, dairy products, etc.
3. Store cooked meat, cooked vegetable etc.
4. Store fruits and vegetables.
5. Store egg, butter, cheese, etc .
6. Store easy open tin can, canned food, spices, etc.
7. Store all kinds of bottled drinks and foods.
7

FreezerCompartment
The freezer compartment is for long term food storage. The
temperature of the freezer compartment is too low and hence it
can keep food fresh for longer periods of time.
1. Use the door of the freezer to store short term food and ice-
cream.
2. Use the grills for storing frozen food.
3. Use the glass shelves for using storage of frozen foods such as
fish, meat and ice-cream.
4. The rotary ice-maker is to produce ice
5. You can store ice cubes in the ice box.
6. Fish, meat and poultry with food packaging can be stored in
the freezer drawer.
8

IntroductiontoFunctions











1. Button Options
a. Freezer Compartment temperature adjustment
Press once and the screen will display the current freezer
compartment temperature. Press again and you can set
the temperature from -16o C to -24o C
b. Mode Settings
Press the button to cycle between the following four
modes - Vacation mode – Quick Freezer Mode – Quick
Cool and Freezer – Quick Cool - None
c. Refrigerator Compartment temperature adjustment
Press once and the screen will display the current
refrigerator compartment temperature. Press again and
you can set the temperature from 2o C to 8o C.
You can tap and hold this button for 3 seconds to switch
off the refrigerator compartment. Similarly, when the
refrigerator compartment is switched off, you can tap and
A
B 1 2 3 4 D
5 6 7 C
9

hold this button for 3 seconds to switch on the
compartment
d. Lock/Unlock Settings
Press the button to put the refrigerator in Lock Mode.
When in locked mode, tap and hold this button for 3
seconds to release the lock.
2. Display Options
a. Vacation Mode
This icon displays if the appliance is in the vacation mode.
b. Quick Freeze Mode
The icon displays if the freezer compartment is the rapid
cool mode or not.
c. Quick Cool Mode
The icon displays if the freezer compartment is the rapid
cool mode or not.
d. Lock Icon
This icon tells if the refrigerator is in the locked state or
now.
e. Freezer Compartment Temperature
This icon displays the temperature inside the freezer
compartment.
f. Refrigerator Compartment Temperature
This icon displays the temperature inside the refrigerator
compartment.
g. Close Icon
10

Maintenance
Defrosting the freezer
The freezer compartment will defrost automatically.
Cleaning
Some food stored in the refrigerator may have bad odour and
hence it is necessary to clean the refrigerator from time to time.
 Switch off the appliance and pull out the power plug before
cleaning
 Use soft towel or sponge with warm water to clean the
refrigerator.
 Wipe dry the refrigerator using a dry cloth.
Replacement of Interior Lights
The replacement of the Interior Lights should be carried out by
professionals only.
Specifications – 12V DC, LED
Switch of the appliance.
As per the photo, remove the shade along the drive direction of the
arrow and then tighten the screws, remove the LED lights.
Restore and replace anti-steps.
11

Troubleshooting

Occurrence Possible Cause/Solutions
Not Working  Make sure the power supply is
connected and the plug is tightly
inserted into the outlet
 Check the voltage level (if too low)
Not Cooling  Temperature is set to a higher value
 Too much food/ liquid stored in freezer
 Hot/Warm Food stored recently
 Doors being opened too frequently
 Heat Source Nearby
Noisy Operation  Refrigerator not placed on a levelled
floor.
Refrigerator
Freezing Food
 Check if the appliance is placed in a
windy area
Foul Smell/Odour  Smelling food not packed properly
 Food gone foul
 Inner cabinet needs cleaning

If you are unable to resolve the issue after taking care of the above
points, please contact a Lloyd authorized service personnel.


12

EnergySavingTips
 The appliance should be placed in the coolest area of the
room. Avoid placing the appliance near any heat producing
appliances, heating ducts or in direct sunlight
 Do not keep keep hot food directly into the refrigerator. Let
the food cool down to room temperature before keeping it in
the refrigerator. Overloading the appliance may cause the
compressor to run for a longer time. Foods that freeze at a
slower rate may loose quality or get spoilt early.
 Be sure to wrap the food properly and wipe the containers dry
before placing them in the appliance. This cuts down on frost
build up in the appliance.
 Appliance storage bin should not be lined with aluminium foil,
wax paper or toilet paper. Liners interfere with the cold air
circulation in the appliance making the refrigerator less
efficient.
 Organize and label food to reduce door openings and
extended searches. Remove as many as items needed at one
time and close the door as soon as possible.
13

LLOYD ELECTRIC ENGINEERING LIMITED (hereinafter referred to as 'the company')
guarantees to the purchaser that this product carries a warranty for the period
mentioned below, commencing from the date of purchase. The company will repair
or replace free of charge any part or parts of the product , if the defect is due to the
faulty material or workmanship. Warranty involves repairing of defective
product/parts and does not entitle purchaser for the replacement of complete
product.
1. This warranty is confined to the first purchaser of the product only.
2. Repair or replacement will be carried out through the Company's Service Centres or
it's Authorised Service Centres.
3. For units installed beyond the municipal limits of the jurisdiction of the authorised
service centre/company's service centre, all expenses incurred in collection the unit or
part/s thereof from the company's service centre/authorised service centre, as well as
expenses incurred in connection with deputing of service personnel/ technicians
towards to and fro travel, conveyance and other incidentals etc. will be borne by the
customer.
4. In the event of repairs/replacement of any part/s of the unit, this warranty will
thereafter continue and remain in force only for the unexpired period of the warranty.
Moreover, the time taken for repair/replacement and in transit whether under the
warranty or otherwise shall not be excluded from the warranty period.
5. The company or it's authorised service centre, reserves the right to retain any part/s or
component/s replaced at it's discretion in the event of a defect noticed in the equipment
during the warranty period.
6. (a) Any change of address shall be intimated to concerned service centre for
continuation of warranty.
(b) Warranty for the unexpired period shall continue after the product is inspected by
the concerned service centre and the product is found free from transit damage.
The customer shall have to pay a visiting charge towards inspection, as applicable.
(c) In case of any transit damage, the product shall be repaired by the concerned
service centre on charges and warranty for unexpired period to continue.
7. The warranty does not cover demonstration/ installation of the product purchased.
WARRANTY TERMS AND CONDITIONS
Refrigerator Comprehensive - 1 year
Compressor - 5 years Plastic / Glassware / Bulb / Tube
Product Warranty Period Part Not Covered
14

8. The company's obligation under this warranty shall be limited to repair or providing
replacement of part/s only. The maximum claim /s if entertained by the company will be
subject to the maximum retail price of the product purchased or the purchase price,
whichever is lower.
9. In the event of any unforeseen circumstance, and spares not being available, the
company's prevailing depreciation rules will be binding on the purchaser to accept as a
commercial solution in lieu of repairs.
10. The warranty is issued at New Delhi , and Courts at New Delhi shall have exclusive
jurisdiction over matters covered or flowing from this warranty.
11. The company's obligation under this warranty shall be limited to repairing or
providing replacement of part/s, which are found to be detective.
12. Repairs during warranty period shall be carried on "Carry In" basis. Wherein for
service the purchaser shall bring the product to the Service Centre with whom the set is
registered for warranty service. The warranty does not cover cost of transportation of
system from place of installation to the Service Centre.
13. The concerned Service Centre will advise the customer whether to effect the repair
at site or its Service Centre.
14. Any part/s of the system replaced by the company at it's discretion shall be with a
functionally operative part.
THIS WARRANTY IS NOT APPLICABLE IN ANY OF THE FOLLOWING CASES:
1. The warranty card is not duly filled and mailed back to the service centre for
registration by the purchaser.
2. The completed warranty card and invoice is not presented to authorised personnel at
the time of repair.
3. The product is not purchased from an Authorised LLOYD dealer.
4. The product is not used according to instructions given in the instruction manual.
5. Defects caused by improper use as determined by the company personnel.
6. Modification or alteration of any nature is made in the electrical circuitry/ or physical
construction of the set.
7. Installation/ repair work is carried out by persons/agency other than authorised by
the company.
8. Site (premises where the product is kept) conditions that do not confirm to the
recommended operating conditions of the machine.
9. The original serial number is removed, obliterated or altered from the machine or
cabinet.
10.Defects due to cause beyond control like lightning, abnormal voltage, acts of God or
while in transit to service centre or purchaser's residence
15