LOBSTER phenom 2 User guide

QUICK START-UP GUIDE
PROGRAMMING
CREATE YOUR FIRST PERSONAL PROGRAM
1. Press th e button.
2. To select a location press one of the 1-18 number buttons.
3. Adjust the SPEED, SPIN, FEED with the button
4. Use the /buttons to high-light the “Next + Back –“ line.
•Press to begin programming the next shot in your drill.
•Press to return to the main menu.
5. Press play button to start the drill.
6. For accuracy, make ball speed & spin changes incremental
between shots.
EDITING AN EXISTING PROGRAM
1. Press the button to display the overall Program screen.
2. Use the buttons to select the program you wish to adjust.
3. Push the /buttons to highligh SHOT, then adjust number to
reflect which shot in the sequence you wish to adjust (1st, 2nd,
5th shot…)
4. Highlight EDIT & press the button.
5. Press 1-18 number buttons to chose
anew location for your shot or
to remove it from the drill.
6. Adjust shot elements (SPEED, SPIN, FEED).
PROGRAM
PROGRAM
P# 1 PLAY TO RUN
SHOT: 3 EDIT:NO
LOCS: 3 14 12 11
12 13
/
/
QUICK START-UP GUIDE
PROGRAMMING
CREATE YOUR FIRST PERSONAL PROGRAM
1. Press th e button.
2. Toselect a location press one of the 1-18 number buttons.
3. Adjust the SPEED, SPIN, FEED with the button
4. Use the /buttons to high-light the “Next + Back –“ line.
•Press to begin programming the next shot in your drill.
•Press to return to the main menu.
5. Press play button to start the drill.
6. For accuracy,make ball speed & spin changes incremental
between shots.
EDITING AN EXISTING PROGRAM
1. Press the button to display the overall Program screen.
2. Use the buttons to select the program you wish to adjust.
3. Push the /buttons to highligh SHOT, then adjust number to
reflect which shot in the sequence you wish to adjust (1st, 2nd,
5th shot…)
4. Highlight EDIT & press the button.
5. Press 1-18 number buttons to chose
anew location for your shot or
to remove it from the drill.
6. Adjust shot elements (SPEED, SPIN, FEED).
PROGRAM
PROGRAM
P# 1 PLAY TO RUN
SHOT: 3 EDIT:NO
LOCS: 3 14 12 11
12 13
/
/
SET-UP & START-UP GUIDE
lobster phenom 2
TM
®
#D641,437
SET-UP & START-UP GUIDE
lobster phenom 2
TM
®
#D641,437

QUICK START-UP GUIDE
PHENOMTM CALIBRATION
1. Start by centering the machine on
the courts center mark, directly
behind the baseline.
2. Press power button and wait
for automatic calibration to complete.
3. Press the test button . The
machine will launch one ball
over the net to the opposite court
towards the “T” where the center
and service line meet.
4. The ball should land within a 2 foot radius of the “T.”
If the test ball lands too near or far from the “T,” use the
/buttons to adjust the distance, retest. If the ball
lands slightly right or left, nudge the front of the
machine to the right or left and retest.
5. Once the test ball lands in the correct spot, press
or one of the training modes and press .
test
#1
#3
QUICK SET-UP GUIDE
PHENOMTM BRAKE
Set the brake before use:
Push on the brake pad with
your foot until you hear or
feel the brake engage.
Confirm that the front
wheels are still positioned
over the baseline, at the
court’s center mark.
Remove the brake after
use:To disengage the
brake, step on the red
base with your foot,
pushing forward with your
body weight.
Set
Release
See reverse side for programming instructions
QUICK SET-UP GUIDE
PHENOMTM BRAKE
Set the brake before use:
Push on the brake pad with
your foot until you hear or
feel the brake engage.
Confirm that the front
wheels arestill positioned
over the baseline, at the
court’s center mark.
Remove the brake after
use:To disengage the
brake, step on the red
base with your foot,
pushing forward with your
body weight.
Set
Release
See reverse side for programming instructions
If you have questions about your machine, DON’T contact your
dealer; please call Lobster Sports directly at 800.210.5992
QUICK START-UP GUIDE
PHENOMTM CALIBRATION
1. Start by centering the machine on
the courts center mark, directly
behind the baseline.
2. Press power button and wait
for automatic calibration to complete.
3. Press the test button . The
machine will launch one ball
over the net to the opposite court
towards the “T” where the center
and service line meet.
4. The ball should land within a 2 foot radius of the “T.”
If the test ball lands too near or far from the “T,” use the
/buttons to adjust the distance, retest. If the ball
lands slightly right or left, nudge the front of the
machine to the right or left and retest.
5. Once the test ball lands in the correct spot, press
or one of the training modes and press .
test
#1
#3
If you have questions about your machine, DON’T contact your
dealer; please call Lobster Sports directly at 800.210.5992