locmarine LTE-10 User manual

Thank you for choosing us,
welcome to the Locmarine
family.
Locmarine provides peace
of mind your boat will
be safe when not in use
and ready for your next
adventure.
Installation Guide
LTE-10 HUB | Installation guide Rev 2.4 | Locmarine Telematics LLC
member of:
Boat Security and Monitoring
w w w . l o c marine.c o m

2
Congratulations on the purchase of your Locmarine LTE-10 system, reading
this installation guide prior to using your system will help maximize the
use of its many features. For any additional questions please contact
your authorized Locmarine dealer. Additional support is also available at:
[email protected]
Before you start
Take a moment to consider is this guide is for you.
If you’re comfortable handling everyday electrical repairs and maintenance
tasks on your boat, follow the instructions in this guide.
If your boat electrical system is complex, or you’re unfamiliar with basic
electrical systems, hire a professional installer or marine electrician.
Safety Considerations
• Check before drilling to make sure that you will not be drilling into a
fuel tank, wiring harness, or other vital systems.
• While this product is designed to be water resistant, it should never be
submerged under water or subjected to high pressure spray.
• Do not mount areas of extreme heat (ie. Engine Rooms).
• Ensure this product is securely installed so that it does not come
loose in the event of a collision/sudden jolt or as a result or repeated
vibrations during normal operation.
• Secure all wiring as needed using cable ties or wire clamps to protect
them from moving parts and sharp edges.
• Always follow proper safety procedures and wear eye protection at all
times when installing.
Disconnect all AC power
sources before accessing
electrical panels, switches
or devices.

www . l ocmar i n e . c o m 3
Create an account
Before beginning the installation, we strongly recommend downloading
the application from the App store and create a user account.
• Go to the App store (Apple) or Play store (Android) and search
“Locmarine”.
• Download and install the free application, please accept/allow the
• Launch the newly installed Locmarine application on your
smartphone
• Scan or type your HUB IMEI number
LABEL
•
• Open your email and look for your 4 digit activation code
• Activate your account and you’re ready to use your Locmarine
monitoring app.

4
Hardware Included
(1) LTE-10 Locmarine HUB
(1) Waterproof Case
(1) LM-H-100 Harness
(1) LM-MRS-KT - Security Sensor Kit
• 22 AWG Cable
• Magnetic Switch
• Stainless Steel Mounting Screws
• 2A Fuse

www.locmarine.com 5
Find the best spot for your Locmarine HUB
• Cables are 16AWG and can be extended as long as needed
• The higher you install the HUB,, the more signal you can capture.
ا ÀǘƵׄJȺǞǐȁƊǶƧƊȁȁȌȲǿƊǶǶɯȯƵȁƵɈȲƊɈƵɈǘȲȌɐǐǘƊ˛ƦƵȲǐǶƊȺȺشɩȌȌƮƮƵƧDz
but not through metal.
Typical strong signal spot in green.
Mounting Orientation
First Option: Mount the Locmarine HUB horizontally so the top (locmarine
logo) is facing upwards, this will be the best orientation for the GPS antenna.
Second option; Mount the Locmarine HUB vertically with the cables facing
down. The Locmarine LTE-10 HUB features a high sensitivity GPS/GNSS
internal antenna allowing you to install vertically if needed.
JǶȌƦƊǶ!ȌɨƵȲƊǐƵخ!ȲȌȺȺƦȌȲƮƵȲȺɩǞɈǘȌɐɈƧȌȁ˛ǐɐȲƊɈǞȌȁȺǘƊȺȺǶƵȺخmȌƧǿƊȲǞȁƵ
operates on a global 4G LTE cellular network.

6
Red (+) 12V
Black (-) Ground
Grey (High Water Output)
Grey (High Water Input)
Brown (+ Input) Bilge Pump
White (AC Neutral 120~240VAC)
Blue (AC Hot 120~240VAC)
Yellow (+5V ~ 15V Input) Security
Orange ( +5V Output) Security
Schematics
120~240VAC
LED Indicator
12~24VDC / Power
LED Indicator

www.locmarine.com 7
Battery Connection / Powering the Unit
• Connect to your battery: (12 or 24V)
• Connect the red (PWR +) wire to a constant, fuse protected, un-
switched positive source (+) typically engine start battery.
• Connect the black wire (GND -) to the negative terminal of your
battery or to any common ground (-) terminal
NOTE
The Locmarine HUB has no on/off switch and will remain
powered while connected to your battery. The HUB is designed
for a very low power consumption and can be powered for
months before the battery needs to be charged.

8
Connect Bilge Pump
Brown Wire (+ input)
• Locate the bilge pump switch controlling the most active bilge pump.
(the pump closest to the stern is usually the most active)
• Connect the brown wire to the switching lead (+) wire (the lead that
carries voltage when the bilge switch is set to ON)

www.locmarine.com 9
Security Sensor
Yellow Wire (+ Input)
Your Locmarine HUB System includes a magnetic sensor kit (LM-MRS-KT).
Installing the sensor:
• Locate the door, hatch or lid you want to monitor, the sensor have to
be installed on the frame and the hatch (please make sure the gap
between the two parts is less than 1/2”).
• Connect the red wire from the provided cable to the orange cable
(+5V output) on the locmarine HUB.
• Connect the yellow wire coming back from the sensor to the yellow
input wire on the Locmarine HUB.
• Every time the magnetic sensor is open (separated) it will send a
signal to the HUB and a “security alert” will be sent to your phone.
NOTES
• You can connect more than one security sensor in your boat
so you can monitor multiple hatches/doors.
• The sensor provided is water proof but it’s recommended to
be installed in a dry area, water between the sensor might
cause false alarms.

10
Shore Power Sensor (120~240 VAC)
White Wire (Neutral)
Blue Wire (Hot)
To connect your shore power sensor, follow these steps:
Option One:
• Locate the main shore
power breaker on your
boat’s AC panel
• Connect the white
cable to the neutral
switching side of the
main breaker
• Connect the blue
cable to the hot
switching side of the
main breaker (black
cable)
Option Two:
• Locate the battery
charger breaker on
your boat’s AC panel
• Connect the white
cable to the neutral
switching side of the
breaker
• Connect the blue
cable to the hot
switching side of the
breaker (black cable)
• Using this option
you can monitor
your shore power
and battery charger
status (on or off)
Disconnect all AC power
sources before accessing
electrical panels,
switches or devices.

www.locmarine.com 11
High Water Alarm Sensor
Grey Wire (HW Out)
Grey Wire (HW IN)
- Your high water alarm sensor works as a loop, the installation is very
simple.
- Connect both grey wires from the Locmarine HUB to the two grey
ɩǞȲƵȺǏȲȌǿɯȌɐȲªɐǶƵ˜ȌƊɈȺɩǞɈƧǘخـ˜ȌƊɈȺɩǞɈƧǘȁȌɈȯȲȌɨǞƮƵƮف
ٌȁƧƵɈǘƵ˜ȌƊɈȺɩǞɈƧǘƧǶȌȺƵȺɈǘƵǶȌȌȯǞɈɩǞǶǶɈȲǞǐǐƵȲɈǘƵƊǶƊȲǿخ
- This sensor has a 6 ~10 second delay to avoid false alarms
ٌXȁȺɈƊǶǶɈǘƵ˜ȌƊɈȺɩǞɈƧǘׄɈȌ׆ǞȁƧǘƵȺǘǞǐǘƵȲɈǘƊȁɯȌɐȲƵɮǞȺɈǞȁǐƦǞǶǐƵ
pump switches.
- This sensor work using the Locmarine HUB power, so it will work
independently, even if your boat batteries are depleted.
àƵɐȺƵƊªɐǶƵ˜ȌƊɈȺɩǞɈƧǘƊȺƊȲƵǏƵȲƵȁƧƵǞȁɈǘǞȺǿƊȁɐƊǶةƦɐɈɈǘƵ
ǘǞǐǘɩƊɈƵȲƊǶƊȲǿǞȺƧȌǿȯƊɈǞƦǶƵɩǞɈǘƊȁɯȺɈƊȁƮƊȲƮ˜ȌƊɈȺɩǞɈƧǘǞȁ
ɈǘƵǿƊȲDzƵɈـȁȌɈƧȌǿȯƊɈǞƦǶƵɩǞɈǘǿƊǐȁƵɈǞƧȌȲׁׂß˜ȌƊɈȺɩǞɈƧǘƵȺف
NOTE

12
Please allow between 10 to 15 minutes after the initial unit
power up for the monitoring and all the alerts to start
working properly.
NOTE

www.locmarine.com 13
Quick Reference Chart
App Sensor Name Wire (s) Input Type Alerts
Bilge Pump Brown + 12V~24V Real time
monitoring and
alerts if the bilge
pump ran for more
than 10 seconds.
Shore Power White and
Blue
120~240AC
(+/- 10%)
Real time
monitoring and
alerts
Battery / Unit Power Red and
Black
+12V~24V (+/-
10%)
Checks battery
status every 5 ~ 10
minutes.
High Water Grey Wires (2) Loop. Real time
monitoring, alerts
will have a 6 to 10
seconds delay.
Security Yellow +12~24V
input
(+/- 10%)
Real time
monitoring and
alerts.
Backup Power Built-in N/A Real time
monitoring and
alerts.
GPS / Geofence Built-in N/A First alert within
1 minute after
movement outside
the Geofence is
detected, updates
every 5 minutes
when moving and
10 minutes on stop.

14

www.locmarine.com 15
Declaration
1. The device supports time division technology
2. Federal Communication Commission Interference Statement This equipment
has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
ɐȁƮƵȺǞȲƵƮȌȯƵȲƊɈǞȌȁخI!!!ƊɐɈǞȌȁبȁɯƧǘƊȁǐƵȺȌȲǿȌƮǞ˛ƧƊɈǞȌȁȺȁȌɈƵɮȯȲƵȺȺǶɯ
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. Firmware is programmed at the factory to
match the intended destination.
Terms and Conditions
Before using this product, please read the terms, conditions, notices and
policies located at: https://locmarine.com/terms-and-conditions including the
warranty, support, return policies.
Please read the end user license agreement at: https://locmarine.com/terms-
and-conditions these terms, conditions, notices and policies are, collectively,
the “agreements”. By using this product, you agree to be bounded by the
agreements. If after reading the agreements as part of the installation process,
you do not agree with the agreements, promptly return the product, together
with all accompanying documentations and packaging, to the reseller from
whom you purchased it and ask for a refund.

Boat Security and Monitoring