LoD Offroad Armor Lite Series User manual

JSP1860 - REV 1 05/28/2020 Page 1
JEEP JK/JL ARMOR LITE SKID
PLATE PAIR
ARMOR LITE SERIES
JK/JL
*VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE
ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST*
WEB LINK: http://lodoffroad.com/assets/pdfs/JSP1860 JK JL Armor Lite Skid Plate Pair.pdf

JSP1860 - REV 1 05/28/2020 Page 2
Loosely assemble the supplied Flat Head Screw and
T-Nut into all 4 positions on the Armor Lite Skid
Plate as shown.
Position the Skid Plate on the Armor Lite Slider so
the T-Nuts are inserted into the T-Slot on the bot-
tom of the Slider.
Using a Allen wrench, turn each Flat Head Screw 90° clockwise so that the shoulder on
the T-Nut catches on the T-Slot as shown below.
With the T-Nut in this position, you will be able to fully tighten the Flat Head Screws.
The Skid Plate should now be able to hang loosely on the bottom of the Slider.
Position the Skid Plate forward or backward as needed to center it on the bottom of the
Slider, then fully tighten each screw equally.

JSP1860 - REV 1 05/28/2020 Page 3
**Maintenance**
• Periodically check and re-tighten all fasteners.
• Periodically check your Armor Lite Skid Plate for scratches or dings which
can happen over time or after heavy use or highway driving. It is important
to address these areas as soon as possible to prevent aking and corrosion
or rust from spreading. We recommend using Rustoleum© brand Black
Semi-Gloss Protective Enamel (oil based). Remove loose powder coating,
sand the area and clean using alcohol. Apply using a foam brush by dab-
bing to match the powder coat texture.

JSP1860 - REV 1 05/28/2020 Page 4
JK / JL INDICATOR
3
1 2
NOTES:
JSP1860 = BARE STEEL
1.
JSP1861 = BLACK POWDER COAT
2.
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
2JSP1860-01
JK/JL ROCK SLIDER SKID PLATE
4DR
2
2
FHSCS142008CZ
FHSCS 1/4-20 X .50 CZ
8
3
TN2520-1
T-NUT 1/4-20, DROP IN, ZINC
PLATE
8
N/A
JEEP JL 4DR ARMOR LITE SKID PLATE
JSP1860 JSP1861
SHEET 1 OF 1
5/13/2020
MCH
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REV
DWG. NO.
DESCRIPTION:
NAME
DATE
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SEE NOTES FINISH:
MATERIAL:
DIMENSIONS ARE IN INCHES TOLERANCES:
0.010
ANGULAR: MACH
1
TWO PLACE DECIMAL
0.015
THREE PLACE DECIMAL
0.005
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE
PROPERTY OF LOD LLC. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF LOD LLC IS
PROHIBITED.
LOD LLC.
A
SHEET SIZE: B
ECO:
-

JSP1860 - REV 1 05/28/2020 Page 5
JK/JL Jeep
ARMOR LITE Series
SKID PLATE PAIR
SHIPPING SHEET
Packaged by:
________________________
On:
________________________
JK/JL ROCK SLIDER SKID
PLATE 4DR
2JSP1860-01
(x2)
Instruction
Booklet
BOLT KIT
(may vary)
JK / JL INDICATOR