Logic Controls smart box 9070 User manual

2
Summary
English 6
Disposal and Recycling Information 6
General Information 6
Safety Information 6
About this Manual 7
Who should read this Manual? 7
How this manual is organized? 7
Related publications and software 7
Where to find more Information 7
Chapter 1: The Product 8
Chapter 2: Product Features 11
POS System 11
Touch Monitor Features 11
Computer Features 11
Chapter 3: Installation 12
Hardware Installation 12
Software Installation 13
Installing Touch Monitor Driver 13
Installing USB Line Display Driver 13
Installing USB Magnetic Stripe Reader Driver 13
Programming the Magnetic Stripe Reader 14
Chapter 4: Product Adjustments 15
Touch Monitor Adjustments 15
Display Control Buttons 15
OSD Menu Functions 15
OSD Control Options 16
Chapter 5: Troubleshooting 19
Chapter 6: Technical Specifications 20

3
Sumário
Português 4
Informações sobre Descarte e Reciclagem 23
Informações Gerais 23
Informações de Segurança 23
Sobre este Manual 24
Quem deverá ler este Manual? 24
Como este Manual está Organizado? 24
Publicações e Softwares relacionados 24
Onde encontrar mais Informações 24
Capítulo 1: O Produto 25
Capítulo 2: Características do Produto 26
Características do Sistema POS 26
Características da Tela Touch Screen 26
Características do computador 26
Capítulo 3: Instalação 27
Instalação do Hardware 27
Instalação do Software 28
Instalando o Driver USB Display Cliente 28
Instalando o Driver do Leitor Magnético USB 28
Programando o Leitor de Cartão Magnético 28
Capítulo 4: Ajustes do Produto 30
Ajustes do Monitor touch Screen 30
Botões de Controle do Dislpay 30
Funções do Menu OSD 30
Opções de Controle OSD 31
Capítulo 5: Soluções de Problemas 34
Capítulo 6: Especificações Técnicas 35

4
Sumario
Español 38
Informaciones sobre el Descarte y Reciclaje 39
Informaciones Generales 39
Informaciones de Seguridad 39
Sobre este Manual 40
Quién debe leer este Manual? 40
Como este Manual está Organizado? 40
Publicaciones y Softwares relacionados 40
Donde encontrar mas Informaciones 40
Capítulo 1: El Producto 41
Capítulo 2: Características del Producto 42
Características del Sistema POS 42
Características del Monitor de Pantalla Táctil 42
Características de la Computadora 42
Capítulo 3: Instalación 43
Instalación de Hardware 43
Instalación de Software 44
Instalación el Driver USB de la Pantalla Line 44
Instalando el Driver del Lector de Tarjeta Magnética USB 44
Programación del Lector de Tarjeta Magnética 44
Capítulo 4: Ajustes del Producto 46
Ajustes del Monitor de pantalla táctil 46
Botones de Control del Display 46
Funciones del Menú OSD 46
Opciones de Control del OSD 47
Capítulo 5: Resolución de Problemas 50
Capítulo 6: Especificaciones Técnicas 51

5
User’s Manual of Smart Box 9070 - Revision 1.0
User’s Manual of Smart Box 9070
P/N: 501001200 - Revision 1.0
First Edition: October 2008
Copyright© by Bematech S.A. Curitiba-PR, Brazil.
All rights reserved.
No part of this publication may be copied, reproduced, adapted or translated without the prior written permission of
Bematech S.A., except when allowed by patent rights.
Information in this publication is purely informative, subjected to change without notice and no liability is assumed
with respect to its use. However, as product improvements become available, Bematech S.A. will make every effort
to provide updated information for the products described in this publication. The latest version of this manual can be
obtained through Bematech website:
www.bematech.com
Notwithstanding the other exceptions contained in this Manual, the consequences and responsibility are assumed
by the Purchaser of this product or third parties as a result of: (a) intentional use for any improper, unintended or
unauthorized applications of this product, including any particular purpose; (b) unauthorized modifications, repairs,
or alterations to this product; (c) use of the product without complying with Bematech S.A. Corporation’s operating
and maintenance instructions; (d) use of the product as component in systems or other applications in which the
failure of this could create a situation where personal injury or material damages may occur. In the events described
above, Bematech S.A. and its officers, administrators, employees, subsidiaries, affiliates and dealers shall not be held
responsible or respond by any claim, costs, damages, losses, expenses and any other direct or indirect injury, as well as
claims which alleges that Bematech S.A. was negligent regarding the design or manufacture of the product.
Bematech S.A. shall not be liable against any damages or problems arising from the use of any options or any
consumable products other than those designated as original Bematech products or approved products by Bematech
S.A.
Any product names or its logotypes mentioned in this publication may be trademarks of its respective owners and shall
be here recognized.
Product warranties are only the ones expressly mentioned in the User’s Manual. Bematech S.A. disclaims any and
all implied warranties for the product, including but not limited to implied warranties of merchantability or fitness
for a particular purpose. In addition, Bematech S.A. shall not be responsible or liable for any special, incidental or
consequential damages or lost profits or savings arising from the use of the product by the Purchaser, the User or
third parties.

6
User’s Manual of Smart Box 9070 - Revision 1.0
Disposal and Recycling Information
General Information
This symbol indicates that your product must be disposed of properly according to local laws and regulations.
When your product reaches its end of life, contact Bematech or your local authorities to learn about recycling
options.
Safety Information
This section presents important information intended to ensure safe and effective use of this product. Please read
this section carefully and store it in an accessible location.
Electrical Safety
 • Topreventelectricalshockhazard,disconnectthepowercablefromtheelectricaloutletbeforerelocatingthe
system.
 • Whenaddingorremovingdevicestoorfromthesystem,ensurethatthepowercablesforthedevicesare
unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing
system before you add a device.
 • Beforeconnectingorremovingsignalcablesfromtheproduct,ensurethatallpowercablesareunplugged.
 • Seekprofessionalassistancebeforeusinganadapterorextensioncord.Thesedevicescouldinterruptthe
grounding circuit.
 • Makesurethatyourpowersupplyissettothecorrectvoltageinyourarea.Ifyouarenotesureaboutthe
voltage of the electrical outlet you are using, contact your local power company.
 • Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualifiedservicetechnicianoryour
retailer.
Operation Safety
 • Beforeinstallingtheproductandaddingdevicesonit,carefullyreadallthemanualsthatcamewiththe
package.
 • Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthepowercablesarenotdamaged.
If you detect any damage, contact you retailer immediately.
 • To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and
circuitry.
 • Avoiddust,humidity,andtemperatureextremes.Donotplacetheproductinanyareawhereitmaybecome
wet.
 • Placetheproductonastablesurface.
 • Ifyouencountertechnicalproblemswiththeproduct,contactaqualifiedservicetechnicianoryouretailer.
Care and Handeling
The following tips will help keep your all-in-one touch terminal functioning at the optimal level.
 • Remembertounplugthedisplayunitfromthepoweroutletbeforecleaning.
 • Donot usealcohol (methyl,ethyl orisopropyl) orany strongdissolvent. Donot usethinner orbenzene,
abrasive cleaners or compressed air.
 • Tocleanthedisplayunitcabinet,useaclothlightlydampenedwithamilddetergent.
Do not immerse unit in water.
 • Avoidgettingliquidsinsideyourall-in-onetouchterminal.Ifliquiddoesgetinside,haveaqualifiedservice
technician check it before you power it on again.
 • Donotwipethescreenwithaclothorspongethatcouldscratchthesurface.
 • Tocleanthetouchscreen,usewindoworglasscleaner.Putthecleanerontheragandwipethetouchscreen.
Never apply the cleaner directly on the touchscreen.

7
User’s Manual of Smart Box 9070 - Revision 1.0
About this Manual
This manual helps you on installation, configuration and use of this Bematech product.
Who should read this manual?
This manual is destined to the use of people who will install and use or test the equipment. The manual should also be
used to diagnose and solve problems.
How this manual is organized?
Chapter 1 - “Product Introduction”
Provides an overview of the product.
Chapter 2 - “Product Safety Instructions”
Provides information of how using the product in an effective way.
Chapter 3 - “Product Features”
Provides product’s main characteristics.
Chapter 4 - “Installation”
Provides information about installing and configuring the product.
Chapter 5 - “Product Adjustments”
Provides information of how adjusting the product in and effective way.
Chapter 6 - “Troubleshooting”
Provides user’s troubles information with the product.
Chapter 7 - “Technical Specifications”
Provides technical information of the product.
Related publications and software:
• CDwithDrivers
Where to find more information:
English contents http://www.bematech.com
Spanish contents http://www.bematech.com
Portuguese contents http://www.bematech.com.br

8
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 1
The Product
The Smart Box 9070 integrated POS system are fanless units fit for retail or hospitality environments where dust
or grease may be present or when fan noise is not desirable. The SMART BOX 9070 allin-one touch terminal combines
the reliable performance of touch technology with the latest advances in LCD display design for a natural flow of
information between user and the all-in-one touch terminal.
The LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid crystal display to provide
superior display performance. A maximum resolution of XGA 1024x768 is ideal for displaying graphics and images.
Other outstanding designs that enhance this LCD monitor’s performance are Plug & Play compatibility, and OSD (On
Screen Display) controls. The touch screen is from the industry’s leader Elo Touch Systems with proven reliability and
supreme performance. The optional Line Display and Magnetic Stripe Reader add-on modules complete the system as
a fully integrated POS terminal.

9
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 2
Product Features
POS System Features
 • Smallfootprint
 • Designedforease-of-service
 • Ruggedandstableconstruction
 • Stylishdesign
 • OptionalintegratedstreamlineMagneticStripeReaderwithUSBinterface.
 • Optionalintegratedvacuumfluorescentdisplayfeaturingtwolineby20characterwith9.5mmcharacterheight,
adjustable viewing angle and USB interface.
 • Detachablestandforwall-mountingapplication.
 • OptionallysupportsdualLCDdisplays
 • DetachableCPUbaseunit(patentpending)
Touch Monitor Features
 • 15”XGATFTcolordisplaysupportresolutionuptoXGA1024x768.CompatiblewithVGA,SVGA,XGA(non-
interlaced).
 • 5-wireresistivetouchpanel
 • Highcontrastwith400:1ratio
 • Anti-scratchandanti-glarecoatingsonscreensurface
 • AdvancedOSDcontrolforpicturequalityadjustment.
 • Built-inspeakers
Computer Features
 • Fanless
 • Singleboardcomputerlimitsnumberofinternalcables
 • IntelCeleron-MULVCPU800MHzto1.1GHz
 • SupportsRAMsizefrom128MBto1GB
 • LargecomplimentofavailableI/Oports:4USB2.0,4RS232,2independentSVGA,Ethernet,Parallel,PS/2
Keyboards/Mouse, Audio Input/Output
 • Massstoragechoices:HDD,CF,orbothHDDandCF
 • Nomovingpartswithcompactflashmassstorage
 • SystembootfromHDD,CF,USB,ornetwork
 • Multimediaready:MPEG-2decodingandvideo,Integrated128-bit2Dand64-bit3Dgraphicsengine,AC97
Audio CODEC

10
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 3
Installation
Hardware Installation
The Smart Box 9070 is shipped with cables already installed in the all-in-one touch terminal and connected
properly. It only need to connect the power cord, network cable, and other external peripheral devices such as receipt
printer or bar code scanner. In case re-installation of the cables is required, follow the steps below.
Before connecting cables to the all-in-one touch terminal and computer, be sure that power of the computer and
all-in-one touch terminal are turned off. Power switch of all-in-one touch terminal is located on the front of the monitor
stand.
1. Remove 2 screws from the front of the monitor stand and pull back the stand back cover to open.
 2. ThreadtheVGAvideocable,audiocable,USBcable,andDCpowercordthroughtheovalholeatthefront
of the monitor stand.
 3. ConnectthevideocabletotouchmonitorVGAconnector.Tightenbyturningthetwothumbscrewsclockwise
to ensure proper grounding.
4. Connect the USB cable to the touch monitor USB input.
5. Plug the audio cable into the audio jack of the touch monitor.
6. Plug the DC power cable into the DC power jack of the touch monitor.
7. Thread all cables through opening at base plate of stand so that all cables go into the computer metal base
case.
8. Thread the DC power cable of the power adapter through the opening at the base from the bottom and plug
into the power socket at the back of the metal base case. Close the back cover.
9. Secure the back cover with the 2 screws from the front.
 10.ConnectVGAcable,audiocableandUSBcabletothecorrespondingconnectorsonthecomputerboard.
11. Connect one end of the power cord to the all-in-one touch terminal power adapter and the other end to the
power outlet.
12. Press the power switch on the front of monitor stand to turn on the power.
1
2
1. Power Adapter Input
2. Serial Port
3. Speaker out / Mic In
4. Keyboard / Mouse Input
5. VideoOutput
6. USB Port
7. Ethernet Port
Observation: If the all-in-one touch terminal has integrated line display option, the line display USB driver has
to be preinstalled before making connections. Refer to Software Driver section for details.
1 2 3 4 5 6 7

11
User’s Manual of Smart Box 9070 - Revision 1.0
Software Installation
Drivers for the touch monitor and line display are preinstalled. To reinstall those drivers, install application
software, or install drivers for new peripherals, an external USB CDROM can be connected to the computer base
USB port. Alternatively, USB flash drive or network drive can also be used depending on installation software
requirement.
Installing Touch Monitor Driver
Logic Controls provides driver software that allows the touch monitor to work with the computer. Drivers are
located on the enclosed CD-ROM for the following operating systems:
    •WindowsXP
    •Windows2000
1. Insert the CD-ROM in your computer’s CD-ROM drive;
2. Double click Setup.EXE within the Windows folder;
3. Click Next;
4. Read the License Agreement and click Yes to accept it;
5. Click Next to select the default destination folder or click Browse to install in an alternate location;
6. Select the components you want to install (USB or RS232 or both);
7. Click Next to Select the default Program folder Logic Touch;
8. Select Next to continue installation.
Installing USB Line Display Driver
The USB drivers are available for download on our web site at www.bematech.com . Please download and unzip
the suitable driver files before installation. There are two types of drivers available. If the POS software is only able to
accessCOMportsforthepoledisplay,usetheVirtualCOMportdevicedriver.
Second one use a specific device name (\\.\LCLD9) to access the pole display directly. Install this driver if you are
using OPOS or the POS software was tailored to use this device name.
1. DO NOT plug the device in USB port;
2. Run “ setup.exe ” program in this driver package;
3. Select “Device Name Driver” or “ VirtualCOMPortDriver ” by clicking the radio buttons;
4. Click <Install> button to start pre-installation and click <OK> to end setup program;
5. Plug the device in USB port and wait for the hardware wizard message box to display;
6. Click <Next> button, and then click <Continue Anyway> button to continue installation automatically.
When finished, click <Finish> button to end installation;
7. Invoke Device Manager to check the device driver’s name or COM port number. Device Name driver is
   installed under “Universal Serial Bus Controllers” and Virtual COM Port Driver is installed under
“Ports (COM & LPT)”.
Installing USB Magnetic Stripe Reader Driver
The integrated MSR does not need USB driver installation. It will use the standard HID keyboard driver and card
data input from the MSR unit will be presented to Windows as normal keyboard input.

12
User’s Manual of Smart Box 9070 - Revision 1.0
Programming the Magnetic Stripe Reader
The integrated MSR is programmable to meet specific requirements of different software. The default output
format of the MSR is set to a common protocol that is compatible with most software.
Programming of the MSR may not be necessary. Before editing the MSR parameters, please refer to the user
manual of the Point-of-Sale software or credit card verification software to find out what are the requirements on the
output format.
To install the programming utility, run the “Setup” program in the utility package. Select destination folder and click
“START” to start the installation process. Skip any warning message dialog boxes by clicking “Yes” or “Continue”.
When installation is completed, reboot the computer. The utility program file MREdit.exe will be copied to the hard
disk in the installation target folder (default is C:\Program Files\Logic Controls ). To program the MSR for specific
output format, follow the procedure below:
1. Start the Programming Utility by double clicking on the “MREdit.exe” icon in the folder where the
utility is installed.
2. A new parameter template can be prepared on the screen by editing the parameters to be used.
3. Alternatively, an old template can be brought into the utility for editing. Either OPEN from a .MTL file
or READ from the magnetic stripe reader. To open an old .MTL file, click on [File] --> [Open] on the
Menu bar or click on the “File Open” icon on the toolbar. To read from the MSR, click [Access MR] -->
[Read from MR] on the Menu bar or click on the “Read from MR” icon on the toolbar.
4. After editing the parameters, it is advised that the template should be first saved into a .MTL template
file for future reference and for programming multiple number of magnetic stripe readers. Then, click
[Access MR] --> [Write into MR] on the Menu bar or click on the “Write to MR” icon on the toolbar
to write the template into the magnetic stripe reader.
5. To test the programmed magnetic stripe reader output, open HyperTerminal and swipe a magnetic stripe
card across the reader. The output will appear in HyperTerminal screen. Check that the output format is
correct as programmed.

13
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 4
Product Adjustments
Touch Monitor Adjustments
 Theall-in-onetouchterminalusuallydoesnotrequireadjustment.Variationsinvideooutputandapplicationmay
require adjustments to your all-in-one touch terminal to optimize the quality of the display.
For best performance, the monitor display should be operating in native resolution, that is 1,024x768 at refresh
rate of 60Hz to 75 Hz. Display resolution in Windows can be selected in the Settings tab of Display Properties.
All adjustments made to the controls are automatically memorized. This feature saves you from having to reset
your choices every time you unplug the monitor or turn the all-in-one touch terminal power off and on. Even if there is
a power failure, the all-in-one touch terminal settings will not be lost.
Display Control Buttons
Control Button Function
1. MENU Display or exit OSD menu.
2. a. Enter contrast adjustment.
b. Move to next item clockwise.
c. Increase value of the parameter selected for adjustment.
3. a. Enter brightness adjustment.
b. Move to next item counter-clockwise.
c. Decrease value of the parameter selected for adjustment.
4. SEL a. Activate auto-adjustment.
b. Selects item on OSD menu for adjustment.
c. Confirms current parameter adjustment and exit to higher level menu.
d. Selects sub-menu.
5. Turns monitor display power on or off.
OSD Menu Functions
To Display and Select the OSD Functions:
1. Press the Menu key to activate the OSD menu.
2. Use or to move counter-clockwise or clockwise through the menu.
3. Press the SEL key to select the highlighted parameter for adjustment. When selected, display color of item
will change from blue to black.
4. Use or to increase or decrease value of the item being adjusted. Press SEL key to end adjustment of the
item.
5. To quit the OSD screen at any time during the operation, press the Menu key. If no keys are pressed for a
period of time (default 45 seconds), the OSD automatically disappears. MENU SEL

14
User’s Manual of Smart Box 9070 - Revision 1.0
OSD Control Options
Control Description
Brightness Increases or decreases brightness.
Contrast Increases or decreases contrast.
V-position Sets vertical position of display area. When the button is pressed, the screen will move up. When
the button is pressed, the screen will move down.
H-position Sets horizontal position of display area. Moves the screen left or right. When the button is pressed,
the screen will move to the right. When the button is pressed, the screen will move to the left.
Recall defaults Returns display monitor parameters to factory default settings.
Rgb Select color temperature option from 9300, 6500, 5500, 7500 and USER. Select USER option to
make custom adjustments to the R/G/B values.
Osd exit Exit OSD menu.
Sharpness Adjust sharpness of display.
Phase Increases or decreases snow noise of the image if necessary after auto adjustment.
Clock Fine adjust dot clock if necessary after auto adjustment.
Osd h-position Moves OSD menu position horizontally on the screen. When the button is pressed, the OSD menu
will move to the right. When the button is pressed, the OSD menu will move to the left.
Osd v-position Moves OSD menu position vertically on the screen. When the button is pressed, the OSD menu will
move up. When the button is pressed, the OSD menu will move down.
Osd time Sets duration (in seconds) the OSD menu will wait before closing automatically after no button has
been pressed.
Auto adjust SelectthisfunctiontoadjustV-Position,H-Position,ClockandPhaseautomaticallyforthevideo
input signal.
Osd language Select OSD display language from English (ENG), French (FRA), German (DEU), Spanish (ESP) and
Japanese (JPN).
Information Displayinformationoncurrentscreenresolution,HorizontalFrequency(FH)andVerticalFrequency.
(FV).

15
User’s Manual of Smart Box 9070 - Revision 1.0
Monitor Preset Modes
To reduce the need for adjustment for different modes, the monitor has default setting modes that are most
commonly used as given in the table below. If any of these display modes are detected, the monitor automatically
adjusts the picture size and centering. When none of the mode is matched, the user can store their preferred modes in
the user modes. The monitor is capable of memorizing up to 7 user modes. The condition to store as a user mode is the
new display information must have at least 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or
the sync signal polarities are different from the default modes.
Mode Resolution H. Freq. (KHz) Band Width (MHz) Sync H Polarity V
1VGA720x350 70Hz 31.47 28.322
2 VGA720x400 70Hz 31.47 28.322
3 VGA640x480 60Hz 31.47 25.175
4 MAC 640x480 66Hz 35.00 32.24 - -
5 VESA640x480 72Hz 37.86 31.5 - -
6 VESA640x480 75Hz 37.50 31.5 - -
7 VESA800x600 56Hz 35.16 36 + +
8 VESA800x600 60Hz 37.88 40 + +
9 VESA800x600 75Hz 46.88 49.5 + +
10 VESA800x600 72Hz 48.08 50 + +
11 MAC 832x624 75Hz 49.72 57.283 - -
12 VESA1024x768 60Hz 48.36 65 - -
13 SUN 1024x768 65Hz 52.45 70.49 - -
14 VESA1024x768 70Hz 56.48 75 - -
15 VESA1024x768 75Hz 60.02 78.75 + +
Native Resolution
The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. It is
the actual number of pixels horizontally in the LCD by the number of pixels vertically in the LCD.
For the Smart Box 9070 LCD all-in-one touch terminal, the native resolution is 1024 x 768 (XGA). In almost all
cases, screen images look best when viewed at their native resolution. You can lower the video input signal resolution
setting of a monitor but not increase it.
When the input pixels contained in the video input format match the native resolution of the panel, there is a one
to one correspondence of mapping of input video pixels to LCD pixels. When the input video is at a lower resolution
than the native resolution of the LCD, the direct correspondence between the video pixels and the LCD pixels is lost.
The LCD controller can compute the correspondence between video pixels and LCD pixels using algorithms contained
on its controller. The accuracy of the algorithms determines the fidelity of conversion of video pixels to LCD pixels.
Poor fidelity conversion can result in artifacts in the LCD displayed image such as varying width characters.
Display Angle
For viewing clarity and comfort, the all-in-one touch terminal can be tilted forward (up to 80° position) or
backward (down to 0° position).
CAUTION: In order to protect the all-in-one touch terminal, be sure to hold the base when adjusting the angle,
and take care not to press hard on the screen.

16
User’s Manual of Smart Box 9070 - Revision 1.0
Monitor Power Management
The monitor is equipped with the power management function which automatically enters sleep mode to reduce the
power consumption when not in use. We recommend switching the monitor off when it is not in use for a long time.
Power Mode Consumption
On <30W
Sleep <4W
Off <2W
NOTE: The monitor automatically goes through the Power Management System (PMS) steps when it is idle.
To re-activate the monitor from PMS condition, press any key on the keyboard or move mouse.

17
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 5
Troubleshooting
There are no user serviceable components inside the Smart Box 9070. Service should be performed only by Logic
Controls or qualified personnel certified by Logic Controls. The following guide lines will help in identifying the source
of a problem.
Problem Suggestions
The monitor does not respond after
you turn on the system.
Check that the monitor’s Power Switch is on.
Turn off the power and check the monitor’s power cord and signal cable for proper connection.
Characters on the screen are dim. Refer to the About Touchmonitor Adjustments section to adjust the brightness.
The screen is blank.
During operation, the monitor screen may automatically turn off as a result of the Power Saving
feature. Press any key to see if the screen reappears.
Refer to the About Touchmonitor Adjustments section to adjust the brightness.
Screen flashes when initialized. Turn the monitor off then turn it on again.
“Out of Range” display.
Check to see if the resolution of your computer is higher than that of the LCD display.
Reconfigure the resolution of your computer to make it less than or equal to 1024x768. See Appendix
A for more information on resolution.
Touch doesn’t work. Make sure the USB cable is securely attached.

18
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 6
Technical Specifications
Characteristics Specifications
General
Power Adapter InputAC100-240V,50-60Hz
Operating Conditions
Temperature 0°C to 40°C (32°F to 104°F)
Humidity 20% to 80% (No Condensation)
Altitude up to 12,000 Feet
Storage Conditions Temperature -20°C to 60°C (-4°F to 140°F)
Humidity 10% to 90% (No Condensation)
Dimensions
Overall height
13.5”, monitor vertical
13”, monitor 45 degree
9.4”, monitor horizontal
Monitor width 14.25” without MSR, 15” with MSR
Base width 8.25”
Base depth 11.6”
Weight (Net) 16.9lb
Certifications UL,C-UL,FCC-B,CE,TUV,VCCI,C-Tick,MPRII
Touch Monitor
LCD Display 15” TFT Active Matrix Panel
Display Size 304.(H)x228.(V)mm
Pixel Pitch 0.297(H)x0.297(V)mm
Display Mode
VGA640x350(70Hz)
VGA720x400(70Hz)
VGA640x480(60/72/75Hz)
SVGA800x600(56/60/72/75Hz)
XGA 1024 x 768 (60 / 70 / 75Hz)
Max. Resolution XGA (1024 x 768) at 75Hz maximum
Contrast Ratio 400 : 1 (typical)
Brightness
5-wire Resistive: typical 205 Cd/m2; Min 164 Cd/m2
Acoustic: typical 230 Cd/m2; Min 184 Cd/m2
Capacitive: typical 205/m2; Min 164 Cd/m2
Response Time Tr: 5 ms, Tf: 12 ms (typical.)
ViewingAngle Vertical-60°to+40°
Horizontal -60° to +60°
Input Signal Video R.G.B.Analog0.7Vp-p,75ohm
Synch TTL Positive or Negative
Signal Connector Mini D-Sub 15 pin
Control Buttons Menu, , , Select, Power
OSD Menu Contrast,Brightness,V-Position,H-Position,RecallDefault,ColorTemperature,Sharpness,
Phase, Clock, OSD Position, OSD Time, OSD Language
OSD Languages English, French, German, Spanish and Japanese
Plug & Play DDC1/2B

19
User’s Manual of Smart Box 9070 - Revision 1.0
Touch Panel (optional) 5-wire Resistive / Acoustic / Capacitive
Built-in Speakers 8 ohm 2W x 2
5-wire Touch
Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm).
This equates to less than ±1%.
Touchpoint Density More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2).
Touch Activation Force Typically less than 4 ounces (113 grams).
Surface Durability Meets Taber Abrasion Test (ASTM D1044), CS-1OF wheel, 500g. Meets pencil hardness 3H.
Expected Life Has been operationally tested to greater than 35 million touches in one location without
failure, using a stylus similar to a finger.
Optical
Light Transmission (per
ASTM D1003) Typically 85% at 550-nm wavelength (visible light spectrum).
VisualResolution
All measurements made using USAF 1951 Resolution Chap, under 30 X magnification, with
test unit located approximately 1.5 in. (38 mm) from surface of resolution chart.
Antiglare surface: 6:1 minimum.
Haze (per ASTM D1003) Antiglare surface: Less than 15%.
Gloss (per ASTM 02457) Antiglare surface: 90 + 20 gloss units tested on a hard-coated front surface.
Line Display
Digits per Row 20
Number of Rows 2
Digit Configuration 5 x 7 Dot Matrix
Digit Height 0.37 in. (9.5mm)
Digit Width 0.24 in. (6.2mm)
Digit Pitch 0.30 in. (7.7mm)
Character Configuration ASCII
Brightness 900 cd/m2 Typical
Display Color Blue-green
Interface USB with virtual COM port driver
Command Set LCI OPOS, other command sets optional
Magnetic Stripe Reader
Track Width 1.4 mm
Core Material Permalloy or Sendust
Life >1,000,000 passes
Card Feed Speed 100 to 1200 mm/sec
Card Feed Force 90g typical, 180g max.
Direction Bi-directional
Interface USB (HID keyboard emulation)

20
User’s Manual of Smart Box 9070 - Revision 1.0
Computer Board
Processor Intel Celeron-M 800MHz to 1.5GHz
Memory 128MB to 1GB DDR
Video 1024x768 pixels, 24-bit color
Network Interface 10/100 Base-T Ethernet
Keyboard/Mouse port PS/2 compatible
USB ports USB 2.0 (4 ports), USB boot capable
Serial ports COM1, COM2, and optional COM3 & COM4
Parallel Port LPT1 optional
Audio Speaker-out and Mic-in, AC97 audio codec