Logic LG-3X1BYOD-P User manual

www.logicav.in
LG-3X1BYOD-P
HDMI 2.0 3x1 Multi-format Presentation Switcher
All Rights Reserved
Version: LG-3X1BYOD-P_2019V1.0
User Manual

HDMI 2.0 3x1 Multi-format Presentation Switcher
www.logicav.in 1
Statement
Thanks for choosing this product, please read this user manual carefully before using
this product. The functions described in this version are updated till July, 2019. In the
constant effort to improve our product, we reserve the right to make functions or
parameters changes without notice or obligation.
Safety Precaution
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies not meeting the products' specifications may cause damage,
deterioration or malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit.
Always unplug the power to the device before cleaning.
Unplug the power when not used for a long period of time.
Refer all servicing to qualified service personnel.
After-sales Service
We provide limited warranty for the product within three years.
Packing List
1x LG-3X1BYOD-P
1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.

HDMI 2.0 3x1 Multi-format Presentation Switcher
www.logicav.in 2
Product Introduction
The LG-3X1BYOD-P is an HDMI 2.0 3x1 Multi-format Presentation Switcher
converting AV signal from HDMI, Mini DP and USB-C inputs to HDMI output.
The LG-3X1BYOD-P is a green low energy consumption product which has a various
application in different places, such as classroom, small meeting room, lecture hall,
and etc.
Features
Supports HDMI, Mini DP and USB-C input signals to be converted to HDMI signals.
Auto-detects the input signal, the last connected signal source will be switched to the
output automatically.
Starts to scan from HDMI to USB-C and switch the first detected source to output.
Supports Mini DP and USB-C input video resolution up to 4K@60Hz 4:4:4.
Supports HDMI input and output video resolutions up to 4K@60Hz 4:4:4 HDR and
Dolby Vision.
HDCP 2.2 compliant.
Powered via USB-A from display end.
LED for power indicating.
Panel Description
4
2
1
5
6
3
①Type-A HDMI input port to connect the device with HDMI output.
②Mini DP input port to connect Mac MINI or other devices with Mini DP output.

HDMI 2.0 3x1 Multi-format Presentation Switcher
www.logicav.in 3
③Type-C USB input port to connect MacBook, Chromebook or other devices with
SlimPort output.
④The power LED illuminates blue when power is applied and is off when no power
is present.
⑤Type-A HDMI output port to connect display.
⑥Type-A USB port to connect the display or other device to power the switcher.
System Connection
The following diagram illustrates typical input and output connections that can be
utilized with this switcher:
Display
Laptop Mac Mini MacBook

HDMI 2.0 3x1 Multi-format Presentation Switcher
www.logicav.in 4
Specification
Input
Connector Type
(1) Type-A HDMI, (1) Mini DP, (1) Type-C USB
HDMI Video Resolution
Up to 4K@60Hz 4:4:4, HDR
Mini DP Video Resolution
Up to 4K@60Hz 4:4:4
USB-C Video Resolution
Up to 4K@60Hz 4:4:4
HDMI Audio
LPCM 7.1 audio, Dolby Atmos®, Dolby®TrueHD, Dolby Digital®
Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through.
HDMI Version
2.0
DP Version
1.2
HDCP Version
HDCP 2.2 compliant.
HDMI/Mini DP/USB-C
Input Cable Length
30cm
Output
Connector Type
(1) Type-A HDMI, (1) Type-A USB
HDMI Version
2.0
DP Version
1.2
HDCP Version
2.2, Pass-through
Video Resolution
Up to 4K@60Hz 4:4:4, HDR
HDMI Output Cable Length
300cm
USB-A Cable Length
150cm
General
Operation Temperature
-5 ~ +55℃
Storage Temperature
-25 ~ +70℃
Relative Humidity
10% ~ 90%
Power Supply
Powered via USB-A from display end.
Power Consumption
Max. 1.8w
Dimension (W*H*D)
135mm x 83mm x 20mm
Net Weight
370g (Including cables)