Logicube ZCLONE User manual

Logicube ZClone™ User Manual I
ZClone™ User’s Manual
Logicube, Inc.
Chatsworth, CA 91311
USA
hone: 818 700 8488
Fax: 818 700 8466
Version: 1.1
Date: 08/06/12
MAN-ZCLONE

Logicube ZClone™ User Manual I
Limitation of Liability and Warranty Information
Logicube Disclaimer
LOGICUBE IS NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT
LIMITED TO PROPERTY DAMAGE, LOSS OF TIME OR DATA FROM USE OF A LOGICUBE PRODUCT, OR ANY
OTHER DAMAGES RESULTING FROM PRODUCT MALFUNCTION OR FAILURE OF (INCLUDING WITHOUT
LIMITATION, THOSE RESULTING FROM: (1) RELIANCE ON THE MATERIALS PRESENTED, (2) COSTS OF
REPLACEMENT GOODS, (3) LOSS OF USE, DATA OR PROFITS, (4) DELAYS OR BUSINESS INTERRUPTIONS, (5)
AND ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
(OR FROM DELAYS IN SER ICING OR INABILITY TO RENDER SER ICE ON ANY) LOGICUBE PRODUCT.
LOGICUBE MAKES E ERY EFFORT TO ENSURE PROPER OPERATION OF ALL PRODUCTS. HOWE ER, THE
CUSTOMER IS RESPONSIBLE TO ERIFY THAT THE OUTPUT OF LOGICUBE PRODUCT MEETS THE
CUSTOMER’S QUALITY REQUIREMENT. THE CUSTOMER FURTHER ACKNOWLEDGES THAT IMPROPER
OPERATION OF LOGICUBE PRODUCT AND/OR SOFTWARE, OR HARDWARE PROBLEMS, CAN CAUSE LOSS
OF DATA, DEFECTI E FORMATTING, OR DATA LOADING. LOGICUBE WILL MAKE EFFORTS TO SOL E OR
REPAIR ANY PROBLEMS IDENTIFIED BY CUSTOMER, EITHER UNDER WARRANTY OR ON A TIME AND
MATERIALS BASIS.
Warranty
DISCLAIMER
IMPORTANT - PLEASE READ THE TERMS OF THIS AGREEMENT CAREFULLY. BY INSTALLING OR USING
LOGICUBE PRODUCTS, YOU AGREE TO BE BOUND BY THIS AGREEMENT.
IN NO E ENT WILL LOGICUBE BE LIABLE (WHETHER UNDER THIS AGREEMENT, RESULTING FROM THE
PERFORMANCE OR USE OF LOGICUBE PRODUCTS, OR OTHERWISE) FOR ANY AMOUNTS REPRESENTING
LOSS OF PROFITS, LOSS OR INACCURACY OF DATA, LOSS OR DELAYS OF BUSINESS, LOSS OF TIME, COSTS
OF PROCUREMENT OF SUBSTITUTE GOODS, SER ICES, OR TECHNOLOGY, PROPERTY DAMAGE, OR
INDIRECT, CONSEQUENTIAL, OR PUNITI E DAMAGES OF A PURCHASER OR USER OF LOGICUBE PRODUCTS
OR ANY THIRD PARTY. LOGICUBE’S AGGREGATE LIABILITY IN CONTRACT, TORT, OR OTHERWISE
(WHETHER UNDER THIS AGREEMENT, RESULTING FROM THE PERFORMANCE OR USE OF LOGICUBE
PRODUCTS, OR OTHERWISE) TO A PURCHASER OR USER OF LOGICUBE PRODUCTS SHALL BE LIMITED TO
THE AMOUNT PAID BY THE PURCHASER FOR THE LOGICUBE PRODUCT. THIS LIMITATION OF LIABILITY
WILL BE EFFECTI E E EN IF LOGICUBE HAS BEEN AD ISED OF THE POSSIBILITY OF ANY SUCH DAMAGES.
LOGICUBE MAKES E ERY EFFORT TO ENSURE PROPER OPERATION OF ITS PRODUCTS. HOWE ER, THE
PURCHASER IS RESPONSIBLE FOR ERIFYING THAT THE OUTPUT OF A LOGICUBE PRODUCT MEETS THE

Logicube ZClone™ User’s Manual II
PURCHASER’S REQUIREMENTS. THE PURCHASER FURTHER ACKNOWLEDGES THAT IMPROPER OPERATION
OF LOGICUBE PRODUCTS CAN CAUSE LOSS OF DATA, DEFECTI E FORMATTING, OR DEFECTI E DATA
LOADING. LOGICUBE WILL MAKE EFFORTS TO SOL E OR REPAIR ANY PROBLEMS IDENTIFIED BY
PURCHASER, EITHER UNDER THE WARRANTY SET FORTH BELOW OR ON A TIME AND MATERIALS BASIS.
LIMITED WARRANTY
FOR ONE YEAR FROM THE DATE OF SALE (THE “WARRANTY PERIOD”) LOGICUBE WARRANTS THAT THE
PRODUCT (EXCLUDING CABLES, ADAPTERS, AND OTHER “CONSUMABLE” ITEMS) IS FREE FROM
MANUFACTURING DEFECTS IN MATERIAL AND WORKMANSHIP. THIS LIMITED WARRANTY CO ERS
DEFECTS ENCOUNTERED IN THE NORMAL USE OF THE PRODUCT DURING THE WARRANTY PERIOD AND
DOES NOT APPLY TO: PRODUCTS DAMAGED DUE TO PHYSICAL ABUSE, MISHANDLING, ACCIDENT,
NEGLIGENCE, OR FAILURE TO FOLLOW ALL OPERATING INSTRUCTIONS CONTAINED IN THE OPERATING
MANUAL; PRODUCTS WHICH ARE MODIFIED; PRODUCTS WHICH ARE USED IN ANY MANNER OTHER THAN
THE MANNER FOR WHICH THEY WERE INTENDED, AS SET FORTH IN THE OPERATING MANUAL; PRODUCTS
WHICH ARE DAMAGED OR DEFECTS CAUSED BY THE USE OF UNAUTHORIZED PARTS OR BY
UNAUTHORIZED SER ICE; PRODUCTS DAMAGED DUE TO UNSUITABLE OPERATING OR PHYSICAL
CONDITIONS DIFFERING FROM THOSE RECOMMENDED IN THE OPERATING MANUAL OR PRODUCT
SPECIFICATIONS PRO IDED BY LOGICUBE; ANY PRODUCT WHICH HAS HAD ANY OF ITS SERIAL NUMBERS
ALTERED OR REMO ED; OR ANY PRODUCT DAMAGED DUE TO IMPROPER PACKAGING OF THE WARRANTY
RETURN TO LOGICUBE. AT LOGICUBE’S OPTION, ANY PRODUCT PRO EN TO BE DEFECTI E WITHIN THE
WARRANTY PERIOD WILL EITHER BE REPAIRED OR REPLACED USING NEW OR REFURBISHED
COMPONENTS AT NO COST. THIS WARRANTY IS THE SOLE AND EXCLUSI E REMEDY FOR DEFECTI E
PRODUCTS. IF A PRODUCT IS HAS BECOME OBSOLETE OR IS NO LONGER SUPPORTED BY LOGICUBE THE
PRODUCT MAY BE REPLACED WITH AN EQUI ALENT OR SUCCESSOR PRODUCT AT LOGICUBE’S
DISCRETION. THIS WARRANTY EXTENDS ONLY TO THE END PURCHASER OF LOGICUBE PRODUCTS. THIS
WARRANTY DOES NOT APPLY TO, AND IS NOT FOR THE BENEFIT OF, RESELLERS OR DISTRIBUTORS OF
LOGICUBE PRODUCTS. UNLESS OTHERWISE AGREED IN WRITING BY LOGICUBE, NO WARRANTY IS
PRO IDED TO RESELLERS OR DISTRIBUTORS OF LOGICUBE PRODUCTS.
IN ORDER TO RECEI E WARRANTY SER ICES CONTACT LOGICUBE’S TECHNICAL SUPPORT DEPARTMENT
IA PHONE OR E-MAIL. PRODUCTS RETURNED TO LOGICUBE FOR REPAIR UNDER WARRANTY MUST
REFERENCE A LOGICUBE RETURN MATERIAL AUTHORIZATION NUMBER (“RMA”). ANY PRODUCT RECEI ED
BY LOGICUBE WITHOUT AN RMA# WILL BE REFUSED AND RETURNED TO PURCHASER. THE PURCHASER
MUST CONTACT LOGICUBE’S TECHNICAL SUPPORT DEPARTMENT IA E-MAIL
(SUPPORT@LOGICUBE.COM) OR IA PHONE AT +1-818-700-8488 OPT. 3 TO OBTAIN A ALID RMA#. THE
PURCHASER MAY BE REQUIRED TO PERFORM CERTAIN DIAGNOSTIC TESTS ON A PRODUCT PRIOR TO
LOGICUBE ISSUING AN RMA#. THE PURCHASER MUST PRO IDE THE PRODUCT MODEL, SERIAL NUMBER,
PURCHASER NAME AND ADDRESS, EMAIL ADDRESS AND A DESCRIPTION OF THE PROBLEM WITH AS
MUCH DETAIL AS POSSIBLE. REASONABLE TELEPHONE AND EMAIL SUPPORT ARE ALSO A AILABLE FOR
THE LIFE OF THE PRODUCT AS DEFINED BY LOGICUBE.
EXCEPT AS OTHERWISE SPECIFICALLY PRO IDED IN THIS AGREEMENT, LOGICUBE PRODUCTS ARE
PRO IDED AS-IS AND AS-A AILABLE, AND LOGICUBE DISCLAIMS ANY AND ALL OTHER WARRANTIES
(WHETHER EXPRESS, IMPLIED, OR STATUTORY) INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD PARTY
RIGHTS.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABO E LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GI ES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY HA E OTHER RIGHTS WHICH ARY FROM JURISDICTION TO JURISDICTION.

Logicube ZClone™ User’s Manual III
RoHS Certificate of Compliance
LOGICUBE PRODUCTS COMPLY WITH THE EUROPEAN UNION RESTRICTION OF THE USE OF CERTAIN
HAZARDOUS SUBSTANCES IN ELECTRONIC EQUIPMENT, ROHS DIRECTI E (2002/95/EC).
THE ROHS DIRECTI E PROHIBITS THE SALE OF CERTAIN ELECTRONIC EQUIPMENT CONTAINING SOME
HAZARDOUS SUBSTANCES SUCH AS MERCURY, LEAD, CADMIUM, HEXA ALENT CHROMIUM AND CERTAIN
FLAME-RETARDANTS IN THE EUROPEAN UNION. THIS DIRECTI E APPLIES TO ELECTRONIC PRODUCTS
PLACED ON THE EU MARKET AFTER JULY 1, 2006.
Logicube Technical Support Contact Information
1. By website: www.logicube.com
2. By email: techsupport@logicube.com
3. By telephone: 1 - (818) 700 8488 ext. 3 between the hours of 7am –5pm PST, Monday through
Friday, excluding U.S. legal holidays.

Logicube ZClone™ User Manual I
Table of Contents
ZCLONE™ USER’S MANUAL I
LIMITATION OF LIABILITY AND WARRANTY INFORMATION I
LOGICUBE DISCLAIMER I
WARRANTY I
ROHS CERTIFICATE OF COMPLIANCE III
LOGICUBE TECHNICAL SUPPORT CONTACT INFORMATION III
TABLE OF CONTENTS I
1. INTRODUCTION TO THE LOGICUBE ZCLONE 1
INTRODUCTION 1
Features 1
2. GETTING STARTED 5
OVERVIEW OF THE ZCLONE 5
APPLYING POWER TO THE ZCLONE 6
CONNECTING 3.5” SERIAL ATA (SATA) DRIVES 6
CONNECTING .5” SERIAL ATA (SATA) DRIVES 7
CONNECTING USB DRIVES 7
CONNECTING OTHER DRIVE TYPES 8
THE USER INTERFACE 8
Touch Screen 8
Buttons 9
Light Tower 9
Buzzer 9
Installing and Removing the Light Tower 9
3. QUICK START 11
QUICK START GUIDE 11
Performing a Clone 11
Performing a Wipe 11
Performing a Hash 12
4. MODES OF O ERATION 13
MODES OF OPERATION 13
Clone 1
Mode 14
Master 14
Selecting Master drives or images 14
Settings 16
HPA/DCO 0
Target 1
Selecting Target drives or images 1
Wipe 2
Hash 26
Hash Method 7

Logicube ZClone™ User’s Manual II
Hash Values 7
Logs 28
ZClone Statistics 29
System Settings 0
5. SYSTEM SETTINGS 31
SYSTEM SETTINGS 31
Restart/Power Off 1
Software Updates 2
User Profile Configurations 2
6. U DATING THE ZCLONE SOFTWARE 33
LOADING NEW SOFTWARE 33
Software Loading Instructions
Via the web 33
Via software file download 34
7. REMOTE O ERATION 36
INTRODUCTION 36
Web Interface 6
Command Line Interface (CLI) 6
Installing Telnet in Windows Vista or 7 37
Connecting via Telnet 7
Connecting via SSH 8
Connecting via Serial Port 9
8. COMMAND LINE INTERFACE MENUS 41
INTRODUCTION 41
Command Line Interface Menus 41
9. O TIONAL ADA TERS 44
INTRODUCTION 44
2.5” SAS/SATA Extension Adapter 44
.5” and 2.5” Parallel ATA (PATA/IDE) Drives 44
1.8” Parallel ATA (PATA/IDE) Drives 45
1.8” ZIF Drives 45
1.8” microSATA Drives 45
mSATA (mini-SATA) Drives 46
eSATA Drives 46
Flash Memory Cards 47
10. FREQUENTLY ASKED QUESTIONS 48
FAQS 48
11. INDEX 49
TECHNICAL SUPPORT INFORMATION 50
SOFTWARE ATTRIBUTION 50

Logicube ZClone™ User’s Manual 1
1. Introduction to the Logicube ZClone
Introduction
Congratulations on your purchase of the Logicube ZClone™. ZClone is the next generation in our
series of advanced, professional hard drive duplication solutions. An ultra-fast, multi-target,
multi-task duplicator, the ZClone delivers advanced technology with an intuitive, easy to use
interface. Designed for volume duplication the ZClone provides IT professionals a fast and
efficient solution for day-to-day hard drive imaging tasks.
Features
• High-speed cloning. The ZClone will clone at speeds of 15GB/min (based
on a 1 to 1 mirror clone using solid state drives. Speeds will vary
depending on type of drives and number of targets)
• Supports 3.5” and 2.5” SAS/SATA hard drives, USB enclosures and
thumb drives. Optional support available for 1.8/2.5/3.5” IDE drives,
eSATA, microSATA, mSATA, 1.8” IDE ZIF drives, and flash media
• Multi-target cloning. 8 dedicated 3.5” SAS/SATA bays, 2 3.5” SATA-only
bays, one internal image storage drive, for maximum of 10 targets
(clone from internal image master to 10 SATA drives or 8 SAS drives)
• Cable-free, slide-in bays provide fast, worry-free, insertion/removal of
drives

INTRODUCTION
Logicube ZClone™ User’s Manual 2
• Supports multiple master/source and target drives; user can assign any
bay as a master/source drive
• Supports cloning from an image; either stored within ZClone or clone
from an external network drive location
• Network sharing. Allows network access (upload/download) to drive
images and log files
• Multi-session capability. Allows user to perform multiple tasks,
including cloning, wiping or hashing concurrently
• Supports cloning USB enclosures and USB thumb drives. 6 USB 2.0
ports. Optional support for USB 3.0 will be available in a future release
• Supports NTFS/FAT32/Linux file systems
• Supports large capacity drives (>2TB)
• Wipe feature. DoD, Secure Erase and custom pass settings.
• Bad sector handling. Scan for bad sectors on the source drive, abort or
skip and log for review
• Color touch screen display provides an intuitive and easy to use
interface
• Hash verification (SHA1, SHA256 or MD5) allows the user to clone and
verify the exact replication of the source drive. Optional High-Speed
Hash erification will be available in a future release
• Multiple cloning modes:
• Mirror Copy (bit for bit copy)
• CleverCopy (copies only data areas, skips blank sectors, scales
partitions to target, supports most O/S including Linux)
• Multi-Image Master: Store multiple images on ZClone’s internal
storage or on a network location and clone to selected targets
• artition Cloning: For multiple partition drives, ZClone
automatically selects the optimum cloning method (Clever or
Mirror)
• Remote operation. ZClone allows you to control all operations from a
remote computer using a web browser or CLI interface.
• Advanced administrative functions allow an administrator to
create/manage image repositories, manage network settings, create
user profiles, save configurations, manage drive bay assignments
• Audit trail/log report
• Optional light stack & audible beeper alerts user when tasks complete
or when attention required

INTRODUCTION
Logicube ZClone™ User’s Manual 3
• H A/DCO support. Clone or wipe HPA/DCO areas of a drive
• Rackmount. The ZClone can be mounted in a 23” rack using off-the-
shelf mounting hardware
System description
The complete ZClone system includes the following:
• The Logicube ZClone unit
• 10 2.5” SATA drive caddies. Caddies are shipped inside the
ZClone drive bays.
• Power cord
• A CD-ROM containing:
• A backup copy of the software that is already pre-
installed on the Logicube ZClone.
• A copy of this manual.
Caution:
Avoid dropping the
Logicube ZClone
or subjecting it to sharp jolts.
When in use, place it on a flat surface.
Caution: Keep the unit dry. If you need to clean your Logicube ZClone, use a
lightly damp, lint free cloth. Avoid using soap or other cleaning agents
particularly those containing bleach, ammonia, alcohol or other harsh
chemicals.
Caution: Do not attempt to service the Logicube ZClone. Doing so may void the
warranty. If your unit requires service, please contact Logicube Technical
Support for assistance.


Logicube ZClone™ User’s Manual 5
2. Getting Started
Overview of the ZClone

G TTING START D
Logicube ZClone™ User’s Manual 6
Applying power to the ZClone
The ZClone has a power supply located in the back of the device. Attach the included power
cable to the ZClone’s power supply and make sure the switch on the power supply is set to the
‘ON’ position.
The ZClone also has a power button located in the front of the device and is used to turn the
ZClone on and off. When the ZClone is turned on, the power button shows a green light.
Connecting 3.5” Serial ATA (SATA) Drives
The ZClone has hot swappable drive bays located in the front of the unit. There are ten (10) 3.5”
drive bays labeled M1, M2, A1 through A4, and B1 through B4.
Each drive bay is hot swappable and drives can be removed or added as long as there is no activity
on the drives.
1. Open the drive bay of your choice by gently pulling the release latch.
2. Carefully swing the drive bay door open all the way to the right.
3. Insert the 3.5” drive face up (SATA ports should be facing in toward the drive bay) and
push it mostly in. Do not push it in all the way.
4. To push the SATA drive all the way in, close the drive bay door. You should hear a ‘click’
when the drive bay door is closed all the way.
NOTE: The drive bay doors have two LEDs. The green LED shows that the drive is connected
and has power. A blinking amber LED should light up showing there is activity on the drive.
This amber LED will light up when you initially connect a drive and will also blink when the
drive is being used for a process (for example cloning or wiping).

G TTING START D
Logicube ZClone™ User’s Manual 7
Connecting 2.5” Serial ATA (SATA) Drives
2.5” Serial ATA (SATA) drives are connected by using the 2.5” SATA drive caddies (included).
Simply slide in the 2.5” SATA drive into the 2.5” SATA drive caddy, and then insert the caddy
into one of the ZClone drive bays.
Connecting USB Drives
USB drives can be connected to the front of the ZClone. Up to 6 USB drives can be
connected (U1 through U6) and each USB port can be used as a Master or Target drive. You
can clone from USB to one of the drive bays, drive bay to USB, USB to Image, or Image to
USB.

G TTING START D
Logicube ZClone™ User’s Manual 8
Connecting Other Drive Types
ZClone supports other drive types, including IDE, mSATA, microSATA and eSATA that require
optional adapters. More information on the types of drives supported and available optional
adapters can be found in Chapter 9: Optional Adapters.
The user interface
The user interface (UI) has been designed to quickly and easily input commands. It is simple and
intuitive showing common icons such as tasks, modes of operation, and scroll icons on the
screen.
Touch Screen
The ZClone features a color LCD Touch Screen that allows the user to quickly
input commands. The screen is bright and easy to read.

G TTING START D
Logicube ZClone™ User’s Manual 9
Buttons
There are three buttons on the front panel.
• Reset – This button is used to reset or reboot the ZClone.
• Mute – This button, when pressed, stops the buzzer from the optional
light tower.
• ower – This button is used to turn the ZClone on and off.
Light Tower
The ZClone is compatible with an optional light tower that may be
purchased from Logicube. The light tower has three lights and a speaker to
allow visual and audible notification of the progress of tasks performed.
The GREEN light on the light tower indicates a successful task completed.
The AMBER light is on when there is activity on the ZClone.
The RED light will come on if a problem is encountered during any task. If
this occurs, check the screen for an error message and instructions on what
to do next.
Buzzer
In addition to the indicator lights, the light tower also has an
audible buzzer to alert the operator of the following
conditions:
The buzzer will sound when the ZClone successfully
completes a task or if a problem is encountered during any
task.
NOTE: The buzzer will be off by default and can be enabled
or disabled via the CLI (Command Line Interface). The CLI is
further explained in Chapter 7: Remote Operation and
Chapter 8: Command Line Interface Menus.
Installing and Removing the Light Tower
The light tower is attached to the back of the ZClone and
can be removed if desired. This will not affect the
performance of the unit.

G TTING START D
Logicube ZClone™ User’s Manual 10
1. To install the light tower on the ZClone, it first needs to
be attached to the back of the unit with four supplied
thumb-screws attached to the light tower.
2. Attach the light tower’s connector to the six-hole
Molex™ connector that is located on the back of the
unit.
3. Light bar removal is the opposite of installation.

Logicube ZClone™ User’s Manual 11
3. Quick Start
Quick Start Guide
The following instructions give a basic overview and steps on how to perform a clone. Details on
each operation, menu, or selection can be found in Chapter 4. Modes of Operation.
erforming a Clone
Follow these steps to perform a clone:
1. Select Clone from the modes of operation on the left side.
2. Tap the Mode icon and select Drive to Drive, Image to Drive or
Drive to Image.
3. Tap the Master icon and choose the master drive or repository
image.
4. Tap the Settings icon and select Clever or Mirror.
5. Change any of the optional settings (Partition Resize Settings, Mirror
Settings, HPA/DCO, and erification).
6. Tap the Target icon and select one or more target locations or
select the repository to be used.
7. Tap the Start icon to start the cloning task.
erforming a Wipe
Follow these steps to perform a wipe:
1. Select Wipe from the modes of operation on the left side.
2. Tap the Target icon and select one or more target locations.
3. Tap the Settings icon and choose the type of wipe you would like to
perform (Secure Erase or wipe mode). If wipe mode is selected,
choose the type of wipe mode to perform (DoD or Custom).
4. Tap HPA/DCO to wipe the HPA or DCO area of the drive.

QUICK START
Logicube ZClone™ User’s Manual 12
5. Tap the Passes icon to edit the number of passes and what gets
written on each pass.
6. Tap the Start icon to start the wipe task.
erforming a Hash
Follow these steps to perform a hash:
1. Select Hash from the modes of operation on the left side.
2. Tap the Target icon and select one target location.
3. Tap the Settings icon to select the hash method or algorithm.
Choose from SHA-1, SHA-256 or MD5 (SHA-1 or SHA-256 are the
recommended algorithms).
4. Leave the expected hash value at zeros to hash the drive.
5. Change any of the optional settings (LBA settings or percentage of
the drive to be hashed).
6. Tap the Start icon to start the hash task.

Logicube ZClone™ User’s Manual 13
4. Modes of Operation
Modes of Operation
There are six (6) modes of operation available on the ZClone. The left side of the screen shows
the different modes that can be set.
CLONE – Performs a clone to and from drives and/or images (drive to drive, image to drive,
or drive to image).
WI E – This mode is used to wipe drives. Drives can be wiped using Secure Erase, DoD, or a
custom wipe setting.
HASH – This mode will perform a SHA1, SHA-256, or MD5 hash of a drive.
LOGS – This mode will display logs of each task that has been performed on the ZClone.
ZCLONE STATISTICS – This will display information about the ZClone including the current
software installed.
SYSTEM SETTINGS – This mode allows changes to the system settings on the ZClone which
includes restart options, software updates, and configuring and viewing user
profiles/configurations.
NOTE: Configuring/viewing user profiles/configurations will be available via the user
interface in a future update. Managing repositories (not shown on Graphical User
Interface (GUI)) and configuring/viewing user profiles can be performed by using the
Command Line Interface (CLI). The CLI is further explained in Chapter 7: Remote
Operation and Chapter 8: Command Line Interface Menus.
Clone
This mode allows you to clone one drive to one or more drives, one drive to
an image, or an image to one or more drives. There are different cloning
methods and settings to choose from. These selections should be
performed in order from left to right.
There are four selections when performing a Clone:

MOD S OF OP RATION
Logicube ZClone™ User’s Manual 14
Mode
– Tap this icon to choose between the
following cloning modes:
• DRI E TO DRI E – Allows cloning from one Master
drive to one or more Target drives.
• IMAGE TO DRI E – Allows cloning from one image
file to one or more Target drives.
• DRI E TO IMAGE – Allows cloning from one Master
drive to one image drive.
Master
– Tap this icon to select which drive or
image file will be used as the Master drive or image. When
‘DRI E TO DRI E’ or ‘DRI E TO IMAGE’ is chosen from the
previous selection, this will show the different drives
connected to the ZClone. When ‘IMAGE TO DRI E’ is chosen
from the previous selection, this will show the repository
screen which contains the different images located on the
ZClone’s repository drive.
Note: If a drive has been selected for a previous task, it will
show as unavailable for other additional tasks.
Selecting Master drives or images
If ‘DRI E TO DRI E’ or ‘DRI E TO IMAGE’ was chosen as the
mode the following screen will appear. This will allow you to
Table of contents
Other Logicube Computer Hardware manuals